The Yacht Devices NMEA 2000 Wi-Fi is a device that enables wireless access to NMEA 2000 marine network data on PCs, smartphones, and tablets. It creates its own Wi-Fi network or can connect to an existing one, allowing users to monitor real-time vessel information such as course, speed, position, wind speed and direction, water depth, and AIS messages through compatible software applications.
|
1-2 weeks delivery time The Yacht Devices YDHS-01N is a plug-and-play NMEA 2000 environmental sensor that measures relative humidity and air temperature and calculates dew point temperature for display on compatible chart plotters and marine instruments. It measures humidity from 0 to 100% RH with 0.04% RH resolution and typical ±2% RH accuracy from 20 to 80% RH, while air temperature measurement covers -40 to +120°C with 0.01°C resolution and typical ±0.3°C accuracy from +5 to +60°C. The unit operates from 7–16 V, consumes 23 mA, weighs 62 g and uses an NMEA 2000 Micro Male connector.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDHS-01R is a plug-and-play environmental sensor for Raymarine SeaTalk NG / NMEA 2000 networks, designed to measure relative humidity and air temperature and calculate dew point temperature for display on compatible chart plotters and instruments. It measures humidity from 0 to 100% RH with 0.04% RH resolution and typical ±2% RH accuracy from 20 to 80% RH, while temperature measurement covers -40 to +120°C with 0.01°C resolution and typical ±0.3°C accuracy from +5 to +60°C. The device operates from 7–16 V, consumes 23 mA, weighs 62 g and uses a Raymarine SeaTalk NG-compatible connector.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNB-07N is a programmable bridge for linking two physical NMEA 2000 or CAN networks into a single logical system while filtering, processing and routing messages between them. The YDNB-07N version uses NMEA 2000 Micro Male connectors, provides 2500 VRMS galvanic isolation between CAN1 and CAN2, operates from 9–16 V on CAN1 and 9–30 V on CAN2, and supports CAN2 speeds from 50 to 1000 kbps while CAN1 remains fixed at 250 kbps. The unit has a 500 mm cable, 54/40 mm CAN1/CAN2 case lengths and weighs 52 g without a MicroSD card.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNB-07R is a programmable NMEA 2000 bridge with dual Raymarine SeaTalk NG-compatible connectors, designed to link two physical NMEA 2000 or CAN networks into a single logical system while filtering, processing and routing messages between them. It provides 2500 VRMS galvanic isolation between CAN1 and CAN2, operates from 9–16 V on CAN1 and 9–30 V on CAN2, and supports CAN2 speeds of 50, 125, 250, 500 and 1000 kbps while CAN1 remains fixed at 250 kbps. The unit has a 500 mm interconnect cable, 54/40 mm CAN1/CAN2 case lengths and weighs 52 g without a MicroSD card.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNG-03N is a bidirectional NMEA 0183-to-NMEA 2000 gateway with an NMEA 2000 Micro Male connector, designed to integrate legacy and modern marine electronics including AIS equipment and autopilot systems. Its NMEA 0183 port supports configurable speeds from 300 to 115200 baud and both single-ended RS-232 and differential RS-422 connections, while the gateway provides 2500 VRMS galvanic isolation between the NMEA 2000 and NMEA 0183 interfaces. The unit operates from 7–16 V via NMEA 2000, consumes 30 mA, has a 400 mm NMEA 0183 cable, a 54 mm case and a weight of 37 g.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNG-03R is a bidirectional NMEA 0183-to-NMEA 2000 gateway with a Raymarine SeaTalk NG-compatible connector, designed to integrate NMEA 0183 equipment with modern marine networks. It supports configurable NMEA 0183 communication from 300 to 115200 baud, both single-ended RS-232 and differential RS-422 connections, AIS traffic, autopilot control, message filtering and fast heading output at 12 Hz. The gateway is powered from the NMEA 2000 network at 7–16 V, consumes 30 mA, provides 2500 VRMS galvanic isolation between NMEA 2000 and NMEA 0183, and features a 400 mm NMEA 0183 cable, 54 mm case and 37 g weight.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNU-02NF is a bidirectional NMEA 2000-to-USB gateway with an NMEA 2000 Micro Male connector and an IP67-rated USB Type A Female connector for protected bulkhead installations. It operates as a virtual COM port and supports 0183, N2K, RAW and AUTO communication modes for transferring navigation, AIS and other NMEA 2000 data between marine networks and Windows, macOS or Linux computers. The gateway supports USB 1.1, 2.0 and 3.0, provides 2500 VRMS galvanic isolation between USB and NMEA 2000, draws an average of 35 mA from USB and 13 mA from the 7–16 V NMEA 2000 network, has a 450 mm cable, 54 mm case and weighs 51 g.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNU-02NM is a bidirectional NMEA 2000-to-USB gateway with an NMEA 2000 Micro Male connector and USB Type A Male plug for direct connection to a PC USB port in a dry indoor location. It supports 0183, N2K, RAW and AUTO operating modes, allowing marine data such as course, speed, position, wind, depth and AIS information to be exchanged between a NMEA 2000 network and compatible Windows, macOS or Linux applications. The gateway supports USB 1.1, 2.0 and 3.0, provides 2500 VRMS galvanic isolation between USB and NMEA 2000, draws an average of 35 mA from USB and 13 mA from the 7–16 V NMEA 2000 network, has a 450 mm cable, 54 mm case and weighs 37 g.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNU-02RF is a bidirectional NMEA 2000-to-USB gateway with a Raymarine SeaTalk NG-compatible network connector and an IP67-rated USB Type A Female connector for protected bulkhead installations. It supports 0183, N2K, RAW and AUTO operating modes for exchanging navigation, AIS and other NMEA 2000 data between marine networks and Windows, macOS or Linux computers. The unit supports USB 1.1, 2.0 and 3.0, provides 2500 VRMS galvanic isolation between USB and NMEA 2000, draws 35 mA from USB and 13 mA from the 7–16 V NMEA 2000 network, has a 450 mm cable, 54 mm case and weighs 51 g.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDNU-02RM is a bidirectional NMEA 2000-to-USB gateway with a Raymarine SeaTalk NG-compatible network connector and USB Type A Male plug for direct connection to a PC in a dry indoor location. It supports 0183, N2K, RAW and AUTO operating modes for exchanging vessel course, speed, position, wind, depth, AIS and other NMEA 2000 data with compatible Windows, macOS and Linux applications. The unit supports USB 1.1, 2.0 and 3.0, provides 2500 VRMS galvanic isolation between USB and NMEA 2000, draws 35 mA from USB and 13 mA from the 7–16 V NMEA 2000 network, has a 450 mm cable, 54 mm case and weighs 37 g.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDOG-01N is an NMEA 2000 Outboard Gateway designed for petrol engines without digital interfaces, providing engine RPM, engine hours and alternator voltage measured through the NMEA 2000 interface. Engine speed is detected inductively by wrapping the gateway’s 2000 mm sensing wire 3–5 turns around a spark plug wire, without making an electrical connection. The unit operates from 9–16 V, consumes 30 mA, supports a pulse-counting range of 200–70,000 PPM with ±0.5% RPM counting accuracy, measures voltage with ±0.05 V accuracy, has a 40 mm case and weighs 25 g.
|
$ 173.47
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDOG-01R is a SeaTalk NG-compatible Outboard Gateway designed for petrol engines without digital interfaces, providing engine RPM, engine hours and alternator voltage to NMEA 2000 equipment. Engine speed is detected inductively by wrapping the gateway’s 2000 mm sensing wire 3–5 turns around a spark plug wire without an electrical connection. The unit operates from 9–16 V, consumes 30 mA, supports a pulse-counting range of 200–70,000 PPM with ±0.5% RPM counting accuracy, measures voltage with ±0.05 V accuracy, has a 40 mm case and weighs 25 g.
|
$ 173.47
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDPG-01N is a programmable marine gateway with an NMEA 2000 Micro Male connector, dual NMEA 0183 serial channels, CAN bus interface and USB Mini-B connection for custom data processing, filtering, protocol conversion and diagnostics. It runs MicroPython based on Python 3, provides a 16 MB internal disk for user programs and logs, supports USB 1.1/2.0, operates from 9–16 V via NMEA 2000 or can be powered from USB, and provides 2500 VRMS galvanic isolation between the NMEA 2000/USB side and NMEA 0183. The unit has a 450 mm NMEA 0183 cable, 54 mm case length and weighs 38 g.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDPG-01R is a programmable marine gateway with a Raymarine SeaTalk NG-compatible connector, dual NMEA 0183 serial channels, CAN bus interface and USB Mini-B connection for custom data processing, filtering, protocol conversion and diagnostics. It runs MicroPython based on Python 3, provides a 16 MB internal disk for user programs and logs, supports USB 1.1/2.0, operates from 9–16 V via NMEA 2000 or from USB, and provides 2500 VRMS galvanic isolation between the NMEA 2000/USB side and NMEA 0183. The unit has a 450 mm NMEA 0183 cable, 54 mm case length and weighs 38 g.
|
$ 289.89
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDRA-01N is an NMEA 2000 rudder angle adapter with a Micro Male connector, designed to integrate existing resistive or voltage-output rudder position sensors with compatible autopilots, chart plotters and marine instruments. It supports resistive sensors up to 400 Ohm, potentiometer-type sensors up to 5 kOhm with external supply, and angular transducers with 0–16 V output, while providing up to 7 calibration points and compensation for sensor-wire resistance. The adapter operates from 7–16 V, consumes 45 mA, provides 2500 VRMS galvanic isolation between the NMEA 2000 interface and sensor input, has an 800 mm cable, 54 mm case and weighs 50 g.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDRA-01R is an NMEA 2000 rudder angle adapter with a Raymarine SeaTalk NG-compatible connector, designed to integrate existing resistive or voltage-output rudder position sensors with compatible autopilots, chart plotters and marine instruments. It supports resistive sensors up to 400 Ohm, potentiometer-type sensors up to 5 kOhm with external supply, and angular transducers with 0–16 V output, while providing up to 7 calibration points and compensation for sensor-wire resistance. The adapter operates from 7–16 V, consumes 45 mA, provides 2500 VRMS galvanic isolation between the NMEA 2000 interface and sensor input, has an 800 mm cable, 54 mm case and weighs 50 g.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDTA-01N is an NMEA 2000 Tank Adapter with a Micro Male connector, designed to integrate existing resistive or voltage-output fluid level sensors with compatible chart plotters and marine instruments. It supports European 10–180 Ohm, American 240–33 Ohm and Japanese 0–310 Ohm senders, non-standard resistive sensors up to 400 Ohm, and voltage-output sensors from 0 to 16 V; it can also operate standalone, in parallel with 1- or 2-coil analog gauges, or alongside a Volvo Penta MDI unit. The adapter provides 12-point tank-shape calibration, operates from 7–16 V, consumes 45 mA, provides 2500 VRMS galvanic isolation, has an 800 mm sensor cable, 54 mm case and weighs 50 g.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDTA-01R is an NMEA 2000 Tank Adapter with a Raymarine SeaTalk NG-compatible connector, designed to integrate existing resistive or voltage-output fluid level sensors with chart plotters and marine instruments. It supports European 10–180 Ohm, American 240–33 Ohm and Japanese 0–310 Ohm sensors, non-standard resistive sensors up to 400 Ohm, and voltage-output sensors from 0 to 16 V; installation can be standalone, parallel with 1- or 2-coil analog gauges, or alongside a Volvo Penta MDI unit. The adapter provides 12-point tank-shape calibration, operates from 7–16 V, consumes 45 mA, provides 2500 VRMS galvanic isolation, has an 800 mm sensor cable, 54 mm case and weighs 50 g.
|
$ 220.04
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDTC-13N is a digital temperature sensor for NMEA 2000 networks, designed to measure gases and liquids from -55 to +125°C (-67 to +257°F). It uses an external sensor in a sealed stainless-steel sleeve on a 950 mm cable, which can be extended up to 100 m, and provides 0.01°C NMEA 2000 output resolution with a maximum error of ±0.5°C from -10 to +85°C and ±2°C outside that range. The unit operates from 7–16 V, consumes 24 mA, weighs 31 g and uses an NMEA 2000 Micro Male connector compatible with DeviceNet Micro Male and Garmin NMEA 2000 Male.
|
$ 173.47
-
+
| ||
|
1-2 weeks delivery time The Yacht Devices YDTC-13NT is an NMEA 2000 digital thermometer with an integrated 120 Ohm network terminator, designed for precise measurement of gas and liquid temperatures from -55 to +125°C (-67 to +257°F). It uses an external sensor in a sealed stainless-steel sleeve on a 950 mm cable that can be extended up to 100 m, delivers 0.01°C NMEA 2000 output resolution, and has a maximum error of ±0.5°C from -10 to +85°C and ±2°C outside that range. The unit operates from 7–16 V, consumes 24 mA, weighs 31 g and uses an NMEA 2000 Micro Male connector compatible with DeviceNet Micro Male and Garmin NMEA 2000 Male.
|
$ 173.47
-
+
| ||
What protocols and data formats does the NMEA 2000 Wi-Fi Gateway YDWG-02 support for seamless communication?
The NMEA 2000 Wi-Fi Gateway YDWG-02 supports both NMEA 2000 and NMEA 0183 protocols, enabling seamless communication between modern and legacy marine digital networks. It allows you to see data from an NMEA 2000 network on a PC or smartphone, facilitating integration with a wide range of equipment supporting these protocols, including Raymarine SeaTalk NG, Simrad SimNet, and Furuno CAN networks. The gateway utilizes TCP and UDP network protocols for data transmission, ensuring compatibility with various navigation software applications. This versatility allows users to access AIS messages from vessels and aircraft, as well as other navigation data, enhancing situational awareness and operational efficiency.
In what scenarios would implementing the NMEA 2000 Wi-Fi Gateway YDWG-02 be particularly beneficial for vessel management?
Implementing the NMEA 2000 Wi-Fi Gateway YDWG-02 is particularly beneficial in scenarios where seamless integration of the NMEA 2000 marine digital network with PCs or mobile devices is desired. The gateway allows you to see real-time navigation data, such as AIS messages from vessels and aircraft, on a PC, enhancing situational awareness. Its compatibility with a wide range of navigation software enables users to connect to an existing Wi-Fi network, facilitating efficient vessel management.
In what types of vessels are Yacht Devices NMEA 2000 devices commonly utilized, and for what specific applications?
Yacht Devices NMEA 2000 devices are commonly utilized on yachts, fishing vessels, and commercial ships for seamless integration of navigation and monitoring systems. They enable access to navigation data and other critical information, such as AIS messages from vessels and aircraft, on a digital network using a PC or compatible software. Their compatibility with a wide range of marine electronics ensures efficient data sharing and enhanced operational control.