The Yacht Devices NMEA 2000 Wi-Fi is a device that enables wireless access to NMEA 2000 marine network data on PCs, smartphones, and tablets. It creates its own Wi-Fi network or can connect to an existing one, allowing users to monitor real-time vessel information such as course, speed, position, wind speed and direction, water depth, and AIS messages through compatible software applications.
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDTA-04 Tank Adapter allows connection of up to four resistive or voltage type fluid level sensors to NMEA 2000 devices. It supports various fluid types and can be configured for up to 16 tanks. Compatible with multiple sensor standards, it offers easy installation and calibration for accurate fluid level readings on chart plotters.
|
€ 232,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDNG-03 NMEA 0183 Gateway connects NMEA 0183 equipment to NMEA 2000 networks, supporting various message types including AIS and autopilot. It features a configurable baud rate, supports RS-232 and RS-422 connections, and includes a MicroSD card slot for easy configuration and firmware updates. Compatible with a wide range of marine electronics.
|
€ 176,72
Type:
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDRA-01 Rudder Adapter connects resistive type rudder angle sensors to NMEA 2000 networks, providing autopilots, chart plotters, and other devices with accurate rudder angle data. It supports various sensor types and offers easy installation, calibration, and configuration through a MicroSD card slot.
|
€ 176,72
Type:
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDVR-04 Voyage Recorder captures GPS tracks, wind, depth, temperature, AIS, and other NMEA 2000 network data during your voyages. It features an audio input for recording VHF or microphone output, storing data on a MicroSD card for analysis, logbook generation, and diagnostics. Compatible with multiple formats and software for extensive data management.
|
€ 270,22
Type:
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDSR-01 Smart Relay helps manage two loads with a single power switch, ideal for applications like combined deck/steaming lights. It features a bi-stable relay, low power consumption, and can handle 7-28V DC loads up to 10A continuous current. Easy to install, it ensures efficient load switching without constant power draw.
|
€ 92,57
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDNB-07 NMEA 2000 Bridge unifies two physical NMEA 2000 networks into a single logical network, enabling smooth message exchange and supporting filtering and message processing. It helps bypass network length and device limits, ensures compatibility, and offers diagnostics and programming capabilities.
|
€ 232,82
Type:
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices BRP-CAN - BRP CAN (Bombardier Rotax) Adaptor (Cable For Engine Gateway YDEG-04) supports up to two BRP engines on a network, and eight engines for J1939 and Volvo Penta EVC. It allows you to monitor engine speed, hours, temperature, boost pressure, keyswitch battery voltage, fuel rate, tank level, and engine warnings on NMEA 2000 instruments. The BRP protocol operates at 500 kbps, unlike the 250 kbps for J1939, and can be activated by updating the configuration file with specific settings. Engine data can be accessed via the diagnostics connector near the fuse box.
|
€ 36,47
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CATERPIL-D12 is a 12-pin adaptor cable for the Engine Gateway YDEG-04, which now supports Caterpillar engines. It provides essential engine data to NMEA 2000 instruments, including engine speed, hours, temperature, boost pressure, keyswitch battery voltage, fuel rate, fuel tank level, and engine warnings transmitted in J1939 messages with PGN 65226.
|
€ 45,82
-
+
|
Yacht Devices CATERPIL-D9 - Caterpillar Round 9-pin Adaptor Cable (Cable For Engine Gateway YDEG-04)
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CATERPIL-D9 cable enables seamless integration of the Caterpillar D9 motor with the YDEG-04 Engine Gateway interface, ensuring reliable connectivity and efficient communication between the engine and the gateway system.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CATERPIL-J17 is a robust adaptor cable designed for seamless connectivity to Caterpillar J1708 engine gateways, ensuring reliable data transfer and optimal engine performance. Easy to install and built to withstand demanding marine environments, it enhances engine diagnostics and monitoring for both professionals and boat enthusiasts.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CUMMINS-D9, a Cummins Round 9-pin Adaptor Cable, allows seamless connection of the Cummins D9 motor with the YDEG-04 Engine Gateway interface, ensuring compatibility and efficient engine communication.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Enhance your NMEA 2000 instruments with the Yacht Devices EFI-10PIN adaptor cable, enabling access to vital engine data including speed, hours, temperature, boost pressure, battery voltage, fuel metrics, tank levels, and J1939 warnings.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices EVC-A-EC12 enables connection for up to eight Volvo Penta EVC-A EC 12-PIN X5 engines on a network, providing essential engine data like speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and warnings via NMEA 2000 instruments.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices EVC-A-M enables monitoring of up to eight Volvo Penta EVC-A engines via NMEA 2000 instruments, providing essential data like engine speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and engine warnings via J1939 messages.
|
€ 36,47
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices EVC-A-MC12 facilitates seamless integration of up to eight Volvo Penta EVC-A MC 12-PIN C5 engines on a network, enhancing NMEA 2000 instruments with essential engine data like speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and critical warnings via J1939 messages.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Yacht Devices EVC-VODIA, an 8-pin EVC/Vodia Volvo Engine Gateway Adaptor. Updated firmware now supports up to eight Volvo Penta EVC engines on a network, delivering vital engine data such as speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and warnings via NMEA 2000 instruments.
|
€ 36,47
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Yacht Devices IP67USBMALE: an IP67-rated USB cable featuring Type-A Male connectors on both ends, designed for direct connection between USB Type-A ports. Perfectly suited for the YDNU-02 USB Gateway.
|
€ 36,47
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Yacht Devices SMARTCRAFT - SmartCraft 10-Pin Adaptor Cable connects Mercury/Mercruiser SMARTCRAFT motors (2011 onwards) to the YDEG-04 Engine Gateway interface.
|
€ 45,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Yacht Devices USBMALE - USB Cable Type-A Male-to-Male is a high-quality USB cable with Type-A Male connectors on both ends. It allows for a direct connection between two USB Type-A ports and is designed for use with the YDNU-02 USB Gateway. With a length of 1.2m (3.9 ft), it provides flexibility and efficient data transfer.
|
€ 17,77
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YAN-4JH is a display adapter cable that connects the Yanmar 4JH engine to the YDEG-04 Engine Gateway interface, enabling seamless data transmission and monitoring of engine performance.
|
€ 36,47
-
+
|
What protocols and data formats does the NMEA 2000 Wi-Fi Gateway YDWG-02 support for seamless communication?
The NMEA 2000 Wi-Fi Gateway YDWG-02 supports both NMEA 2000 and NMEA 0183 protocols, enabling seamless communication between modern and legacy marine digital networks. It allows you to see data from an NMEA 2000 network on a PC or smartphone, facilitating integration with a wide range of equipment supporting these protocols, including Raymarine SeaTalk NG, Simrad SimNet, and Furuno CAN networks. The gateway utilizes TCP and UDP network protocols for data transmission, ensuring compatibility with various navigation software applications. This versatility allows users to access AIS messages from vessels and aircraft, as well as other navigation data, enhancing situational awareness and operational efficiency.
In what scenarios would implementing the NMEA 2000 Wi-Fi Gateway YDWG-02 be particularly beneficial for vessel management?
Implementing the NMEA 2000 Wi-Fi Gateway YDWG-02 is particularly beneficial in scenarios where seamless integration of the NMEA 2000 marine digital network with PCs or mobile devices is desired. The gateway allows you to see real-time navigation data, such as AIS messages from vessels and aircraft, on a PC, enhancing situational awareness. Its compatibility with a wide range of navigation software enables users to connect to an existing Wi-Fi network, facilitating efficient vessel management.
In what types of vessels are Yacht Devices NMEA 2000 devices commonly utilized, and for what specific applications?
Yacht Devices NMEA 2000 devices are commonly utilized on yachts, fishing vessels, and commercial ships for seamless integration of navigation and monitoring systems. They enable access to navigation data and other critical information, such as AIS messages from vessels and aircraft, on a digital network using a PC or compatible software. Their compatibility with a wide range of marine electronics ensures efficient data sharing and enhanced operational control.