ID
1103182
$ 173.47
1-2 weeks delivery time
-
+
The Yacht Devices YDTC-13N is a digital temperature sensor for NMEA 2000 networks, designed to measure gases and liquids from -55 to +125°C (-67 to +257°F). It uses an external sensor in a sealed stainless-steel sleeve on a 950 mm cable, which can be extended up to 100 m, and provides 0.01°C NMEA 2000 output resolution with a maximum error of ±0.5°C from -10 to +85°C and ±2°C outside that range. The unit operates from 7–16 V, consumes 24 mA, weighs 31 g and uses an NMEA 2000 Micro Male connector compatible with DeviceNet Micro Male and Garmin NMEA 2000 Male.
- Description
- Ask a Question
-
Yacht Devices YDTC-13N Digital Thermometer with NMEA 2000 Micro Male Connector, -55 to +125°C
The Yacht Devices YDTC-13N is a digital marine thermometer designed for precise temperature measurement in NMEA 2000 networks. It measures gases and liquids over a temperature range from -55 to +125°C (-67 to +257°F) and transmits the measured data to compatible chart plotters, digital navigation instruments and other NMEA 2000 equipment.
The temperature sensor is located outside the device case in a sealed stainless-steel sleeve and is connected by a flexible 950 mm cable. The sensor cable can be extended by the user up to 100 meters when required.
Main Features
- Temperature measurement range from -55 to +125°C
- External stainless-steel temperature sensor
- 950 mm sensor cable
- Sensor cable can be extended up to 100 m
- NMEA 2000 Micro Male connector
- Compatible with DeviceNet Micro Male and Garmin NMEA 2000 Male
- 0.01°C NMEA 2000 output resolution
- Configurable temperature data type
- Factory-calibrated digital sensor
- Configurable temperature offset from -10.0 to +10.0°C
- Stores temperature measurements from the previous 48 hours
- Supports NMEA 2000 digital switching based on measured temperature
Temperature Measurement Specifications
Parameter Specification Measurement range -55 to +125°C Measurement range -67 to +257°F NMEA 2000 data output resolution 0.01°C Maximum error from -10 to +85°C ±0.5°C Maximum error outside -10 to +85°C ±2°C Configurable temperature offset -10.0 to +10.0°C
Electrical Specifications
Parameter Specification Operating voltage 7–16 V from NMEA 2000 network Current consumption 24 mA Load Equivalency Number 1 LEN Reverse polarity protection Yes Operating temperature range of device, excluding sensor -40 to +80°C
Physical Specifications
Parameter Specification Model YDTC-13N Network connector NMEA 2000 Micro Male Connector compatibility NMEA 2000 Micro Male / DeviceNet Micro Male / Garmin NMEA 2000 Male Sensor cable length 950 mm Sensor sleeve material Stainless steel Sensor sleeve diameter 6 mm Device case diameter 20 mm Device case length 40 mm Weight 31 g
Configurable Temperature Types
Type Temperature Data 0 Sea Temperature 1 Outside Temperature 2 Inside Temperature 3 Engine Room Temperature 4 Main Cabin Temperature 5 Live Well Temperature 6 Bait Well Temperature 7 Refrigeration Temperature 8 Heating System Temperature 9 Dew Point Temperature 10 Wind Chill Temperature, Apparent 11 Wind Chill Temperature, Theoretical 12 Heat Index Temperature 13 Freezer Temperature
The factory temperature type setting is Outside Temperature.
NMEA 2000 Data Output
The YDTC-13N can transmit temperature data through several NMEA 2000 messages depending on the configured temperature type and connected equipment.
- PGN 130310
- PGN 130311
- PGN 130312
- PGN 130316
The transmission interval can be configured from 50 milliseconds to 1 hour, while a value of 0 disables transmission of the selected PGN.
Historical Temperature Data
The thermometer stores measurements from the previous 48 hours in internal RAM. Historical data can be retrieved by compatible software or hardware, including CAN Log Viewer or an NMEA 2000 Wi-Fi Gateway.
Digital Switching Support
With firmware version 1.50 or later, the YDTC-13N can control channels of NMEA 2000 digital switching equipment supporting PGN 127502 Switch Bank Control.
- Up to 3 configurable ON rules
- Up to 3 configurable OFF rules
- Switching based on actual temperature
- Configurable switching delay
- Can automatically control pumps, alarms or other compatible loads
Sensor Cable Extension
The 950 mm sensor cable can be extended up to 100 meters. The manufacturer specifies a three-conductor extension cable with a conductor cross-section of at least 0.2 mm² and a conductor diameter of at least 0.5 mm.
- Maximum extension length: 100 m
- Minimum conductor cross-section: 0.2 mm²
- Minimum conductor diameter: 0.5 mm
- UTP 3, UTP 5 and UTP 5e cables with AWG-24 or AWG-22 conductors are suitable
The cable should be routed away from strong electromagnetic interference sources such as motors, compressors, generators, electric pumps and transmitting antennas.
Installation
The thermometer is directly connected to the NMEA 2000 bus without a drop cable. The device should be installed in a dry location and bus power must be switched off before connection.
The external stainless-steel sensor sleeve is waterproof, but it is not intended for permanent installation in hostile environments such as seawater. For outdoor installation, the manufacturer recommends protecting the sensor case against corrosion.
Package Contents
- YDTC-13N Digital Thermometer – 1 pc.
- User Manual – 1 pc.
Product Identification
Parameter Specification Brand Yacht Devices MPN YDTC-13N EAN 4779045210106 -
Popular products
-
1-2 weeks delivery time$ 173.47 -
1-2 weeks delivery time$ 220.04 -
1-2 weeks delivery time$ 220.04 -
1-2 weeks delivery time$ 173.47 -
1-2 weeks delivery time$ 173.47 -
-
1-2 weeks delivery time -
1-2 weeks delivery time$ 336.46 -
1-2 weeks delivery time$ 336.46 -
1-2 weeks delivery time$ 289.89