Tecnoseal is an Italian manufacturer specializing in sacrificial anodes and cathodic protection solutions for marine and industrial applications. Tecnoseal anodes are manufactured in Italy and are available in zinc, aluminum, and magnesium for boats, yachts, commercial vessels, propulsion systems, and other equipment exposed to seawater, brackish water, or freshwater.
Tecnoseal Italy produces a broad range of standard and application-specific marine anodes in different shapes, sizes, weights, and mounting configurations. Tecnoseal marine anodes are used for hulls, propeller shafts, propellers, rudders, trim tabs, engines, sterndrives, and other submerged metal components that require sacrificial cathodic protection.
The Tecnoseal group also operates internationally, including Tecnoseal Marine Anodes USA in Florida, supporting customers and marine markets across the Americas.
At Yacht-Supply24.com, we supply Tecnoseal anodes and can assist with product identification, OEM cross-references, material selection, and finding the correct replacement by Tecnoseal part number, original manufacturer reference, dimensions, or application.
Send us your request if you need help identifying the correct Tecnoseal anode or compatible replacement.
|
1-2 weeks delivery time The Tecnoseal 01151 series consists of cylindrical sacrificial pencil anodes designed for internal crankcase and cylinder applications on Yamaha 9.9–300 HP outboard engines, corresponding to Yamaha OEM part number 66M-11325-00. Each anode features a stepped cylindrical body with an axial M5 internal mounting thread, helping protect metallic engine components against corrosion. The anode measures 31 mm in overall length (l) and 10 mm in outside diameter (Ø), with a 15 mm stepped-section length (l1). Three material versions are available: zinc (Tecnoseal 01151, 10 g), aluminium (Tecnoseal 01151AL, 4 g) and magnesium (Tecnoseal 01151MG, 3 g). All three versions share identical dimensions and mounting geometry. The same anode design is also listed under Tecnoseal catalogue reference 01752. |
$ 16.78
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01152 series consists of small sacrificial internal engine anodes designed for Yamaha 6–350 HP outboard motors, corresponding to Yamaha OEM part number 6E5-11325-00. Each anode features a compact wedge-shaped body with a recessed central mounting hole and raised sections at both ends, helping protect metallic components in the crankcase and cylinder assembly against corrosion. The anode measures 27 mm in overall length (l), 14 mm across the narrower central section (l1), 10 mm in height (h) and 5 mm in mounting-hole diameter (Ø). Three material versions are available: zinc (Tecnoseal 01152, 10 g), aluminium (Tecnoseal 01152AL, 4 g) and magnesium (Tecnoseal 01152MG, 3 g). All versions share identical dimensions and mounting geometry. The catalogue also lists Tecnoseal 01753 as an alternative reference for this anode design. |
$ 11.14
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01153 series consists of sacrificial high-performance trim tab anodes designed for Yamaha 60–225 HP outboard motors equipped with high-performance propellers, corresponding to Yamaha OEM part number 6E5-45371-10. Unlike conventional trim tab anodes with a vertical fin, this design features a flat circular plate with a raised central mounting section, providing corrosion protection while accommodating the specified high-performance propeller application. The anode measures 91 mm in outside diameter (Ø), with a plate thickness (h) of 5 mm, an overall mounting-section height (h1) of 22 mm, and additional profile dimensions of 15 mm (a) and 46 mm (b). The mounting thread is M10 × 1.25. Two material versions are available: zinc (Tecnoseal 01153, 240 g) and magnesium (Tecnoseal 01153MG, 60 g). Both versions share identical dimensions and mounting geometry. |
$ 38.69
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01154 series consists of sacrificial lower unit anodes designed for Yamaha 15–20 HP outboard motors, corresponding to Yamaha OEM part number 6AH-45251-00. Each anode features a shaped plate with an integrated raised mounting section and a 6.5 mm fastening hole, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 80 mm in length (l), 59 mm in width (a) and 26 mm in height (h), with a mounting-hole diameter (Ø) of 6.5 mm. Three material versions are available: zinc (Tecnoseal 01154, 690 g), aluminium (Tecnoseal 01154AL, 270 g) and magnesium (Tecnoseal 01154MG, 170 g). All three versions share identical dimensions and mounting geometry. |
$ 35.96
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01155 series consists of sacrificial lower unit anodes designed for Yamaha 300–350 HP outboard motors, corresponding to Yamaha OEM part number 6AW-45373-00. Each anode features a shaped plate with two raised mounting sections and a central 11 mm fastening hole, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 90 mm in length (l), 93 mm in width (a), 65 mm in overall height (h) and 52 mm in secondary height (h1). Three material versions are available: zinc (Tecnoseal 01155, 1.03 kg), aluminium (Tecnoseal 01155AL, 0.40 kg) and magnesium (Tecnoseal 01155MG, 0.26 kg). All versions share identical dimensions and mounting geometry. |
$ 62.49
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01156 series consists of small sacrificial internal engine anodes designed for Yamaha 75–250 HP outboard engines and the listed VX/SX WaveRunner applications (2008–2013). Corresponding to Yamaha OEM part numbers 68V-11325-02 and 6AW-11325-00, these anodes help protect metallic crankcase and cylinder components against corrosion. Each anode features a stepped cylindrical body with an M6 internal threaded mounting hole, measuring 32 mm in overall height (h), 14 mm in smaller diameter (Ø) and 22 mm in larger diameter (Ø1). Three material versions are available: zinc (Tecnoseal 01156, 60 g), aluminium (Tecnoseal 01156AL, 20 g) and magnesium (Tecnoseal 01156MG, 6 g). All three versions share identical dimensions and mounting geometry. |
$ 38.69
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01156-1 series consists of sacrificial internal engine anodes designed for Yamaha 75–250 HP outboard motors, corresponding to Yamaha OEM part number 68V-11325-01. Each anode features a cylindrical body with a recessed hexagonal socket and an internal M6 threaded mounting hole, helping protect metallic components within the crankcase and cylinder assembly against corrosion. The anode measures 32 mm in overall length (l), 28 mm in secondary length (l1), 14 mm in mounting-section dimension (a) and 21 mm in outside diameter (Ø). Three material versions are available: zinc (Tecnoseal 01156-1, 70 g), aluminium (Tecnoseal 01156-1AL, 30 g) and magnesium (Tecnoseal 01156-1MG, 20 g). All versions share identical dimensions and mounting geometry. |
$ 41.39
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01157 series consists of sacrificial plate anodes designed for Yamaha Hydra Drive sterndrive systems, corresponding to Yamaha OEM part number 6U0-45251-00. Each anode features a shaped metal plate with a raised central section, multiple mounting points and two rectangular openings, helping protect submerged metallic sterndrive components against galvanic corrosion. The anode measures 225 mm in overall length (l), 145 mm in secondary length (l1), 130 mm in width (a), 25 mm in height (h) and 35 mm in mounting dimension (i). Three material versions are available: zinc (Tecnoseal 01157, 1.50 kg), aluminium (Tecnoseal 01157AL, 0.59 kg) and magnesium (Tecnoseal 01157MG, 0.38 kg). All versions share identical dimensions and mounting geometry. |
$ 97.74
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01158 is a zinc sacrificial anode plate designed for Yamaha Hydra Drive sterndrive systems, including SX, DE-DHD, DE-DHT and DE-DHT-C models. Corresponding to Yamaha OEM part number 604-45373-00, it helps protect submerged metallic drive components against galvanic corrosion. The anode features a curved plate with two recessed mounting holes and measures 120 mm in overall length (l), 70 mm in width (a), 11 mm in height (h), with a 50 mm mounting-hole spacing dimension (i) and 8.5 mm mounting-hole diameter (Ø). Made from zinc, Tecnoseal 01158 weighs 0.33 kg (0.73 lbs) and is intended as a replacement corrosion protection component for the specified Yamaha sterndrive applications. |
$ 117.34
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01159 is a zinc sacrificial anode plate designed for Yamaha Hydra Drive DE-DHT-C sterndrive systems, corresponding to Yamaha OEM part number 6U4-45251-00. The anode features an elongated rectangular plate with two raised mounting sections and fastening holes, helping protect submerged metallic drive components against galvanic corrosion. It measures 187 mm in overall length (l), 46 mm in width (a) and 32 mm in height (h), with a 76 mm mounting-hole spacing dimension (i) and 9 mm mounting-hole diameter (Ø). Manufactured from zinc, the Tecnoseal 01159 weighs 0.69 kg (1.52 lbs) and is intended as a replacement corrosion protection component for the specified Yamaha Hydra Drive application. |
$ 140.33
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01160T is a zinc pencil anode supplied complete with a brass threaded plug, designed for Yamaha Hydra Drive sterndrive systems and corresponding to Yamaha OEM part number N51-11325-01. The replaceable zinc element provides sacrificial corrosion protection for compatible internal water-contacting components, while the brass plug provides the threaded mounting connection. The assembly measures 52 mm in length (l), with a 12 mm zinc element diameter (Ø) and a 19 mm brass plug head dimension (c). It features a 3/8-inch tapered gas thread (3/8" Gas Conico) and weighs 0.06 kg (0.13 lbs). Tecnoseal 01160T is supplied as a complete zinc-and-brass assembly. |
$ 110.04
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01161 series consists of small cylindrical sacrificial anodes designed for Yamaha 25 HP outboard engine crankcase and cylinder applications, corresponding to Yamaha OEM part number 6BL-11325-00. Each anode helps protect internal metallic engine components against corrosion and features a cylindrical body measuring 25 mm in height (h), 13 mm in outside diameter (Ø) and 6 mm in central hole diameter (Ø1). Two material versions are available: zinc (Tecnoseal 01161, 20 g) and magnesium (Tecnoseal 01161MG, 5 g). Both versions share identical dimensions and mounting geometry. |
$ 36.89
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01162 is a zinc sacrificial internal engine anode designed for Yamaha 9.9–15 HP outboard motors, corresponding to Yamaha OEM part number 682-11325-00 and catalogue equivalent 01754. It helps protect metallic components in the engine crankcase and cylinder assembly against corrosion. The anode features a compact, irregularly shaped body with a recessed mounting section and a 5.5 mm fastening hole. It measures 27 mm in length (l), 17 mm in width (a) and 15 mm in height (h), with a mounting-hole diameter (Ø) of 5.5 mm. Manufactured from zinc, Tecnoseal 01162 has a catalogue weight of 0.005 kg (5 g). |
$ 26.50
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01163 is a zinc sacrificial anode designed for the crankcase and cylinder assembly of Yamaha 6–300 HP outboard engines. It corresponds to Yamaha OEM part numbers 6BT-11325-00 and 68T-11325-00 and helps protect internal metallic engine components against galvanic corrosion. The anode features a cylindrical body with a recessed central opening and measures 20 mm in height (h), 13 mm in outside diameter (Ø), 10 mm in recess diameter (Ø1) and 6 mm in central hole diameter (Ø2). Manufactured from zinc, it weighs 0.02 kg (0.04 lbs). Its compact construction is intended for the specified Yamaha internal engine application. |
$ 44.11
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01164 is a zinc sacrificial internal engine anode designed for Yamaha 150–350 HP outboard motors, corresponding to Yamaha OEM part number 63P-11325-11-00. It helps protect metallic components within the engine crankcase and cylinder assembly against corrosion. The anode features a compact rectangular body with chamfered upper corners and a central countersunk mounting hole. It measures 27 mm in length (l), 15 mm in width (a) and 10 mm in height (h), with a 7 mm mounting-hole diameter (Ø). Manufactured from zinc, the anode weighs 0.02 kg (0.04 lbs) and is intended as a replacement corrosion protection component for the specified Yamaha engine application. |
$ 44.11
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01165 is a zinc sacrificial internal engine anode designed for Yamaha 150 HP outboard motors, corresponding to Yamaha OEM part number 63P-11325-21-00. It helps protect metallic components within the engine crankcase and cylinder assembly against corrosion. The anode features a compact cylindrical washer-shaped body with a countersunk central opening, measuring 6 mm in height (h), 12 mm in outside diameter (Ø) and 6 mm in central opening diameter (Ø1). Manufactured from zinc, the anode weighs 0.005 kg (5 g) and is intended as a replacement corrosion protection component for the specified Yamaha engine application. |
$ 41.30
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01166 is a zinc sacrificial internal engine anode designed for Yamaha 40 HP outboard motors, corresponding to Yamaha OEM part number 63P-11325-00 and listed as equivalent to catalogue references 01758 and 01216. It helps protect metallic components within the crankcase and cylinder assembly against corrosion. The anode features a compact, wedge-shaped body with a curved upper profile and a countersunk mounting hole. It measures 25 mm in length (l), 22 mm in width (a) and 15 mm in height (h), with a 7 mm mounting-hole diameter (Ø). Manufactured from zinc, Tecnoseal 01166 weighs 0.03 kg (0.07 lbs). |
$ 45.96
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01167 is a zinc sacrificial internal engine anode designed for Yamaha 150–350 HP outboard motors, corresponding to Yamaha OEM part number 63P-11325-01. It helps protect metallic components within the crankcase and cylinder assembly against galvanic corrosion. The anode features a compact rectangular body with a chamfered corner and a countersunk mounting hole. It measures 32 mm in length (l), 13 mm in width (a) and 10 mm in height (h). Manufactured from zinc, the anode weighs 0.02 kg (0.04 lbs) and is intended as a replacement corrosion protection component for the specified Yamaha engine application. |
$ 44.11
-
+
| |
What is Tecnoseal known for in the marine industry?
Tecnoseal specializes in sacrificial anodes and cathodic protection products for leisure boats, yachts, commercial vessels, and other marine applications. Its range includes zinc, aluminum, and magnesium anodes for propulsion systems, engines, hull components, shafts, propellers, rudders, trim tabs, and other underwater equipment.
Where are Tecnoseal anodes manufactured?
Tecnoseal is based in Grosseto, Italy, and its anodes are designed and manufactured in Italy. The company supplies marine and industrial cathodic protection products to customers in international markets.
Does Tecnoseal operate in the USA?
Yes. Tecnoseal Marine Anodes USA operates in Florida and supports the Tecnoseal range for the American market. Tecnoseal also maintains operations in several other international markets.
Can Tecnoseal anodes be used as replacements for original OEM anodes?
Many Tecnoseal anodes are designed as compatible replacements for original marine equipment. The correct Tecnoseal part can often be identified using the OEM reference, engine or drive model, or the part number of the existing anode.
Dimensions, mounting-hole spacing, shape, material, and weight should also be checked before installation.
How can I find a Tecnoseal anode if I only know the original manufacturer part number?
OEM part numbers can often be cross-referenced with Tecnoseal catalogue numbers to identify a compatible replacement. This is useful when replacing anodes fitted to engines, sterndrives, propellers, shafts, and other branded marine equipment.
If the original reference is unavailable, the equipment model together with photographs and anode dimensions can help identify the correct product.
What information is useful when selecting a Tecnoseal replacement anode?
Useful information includes the Tecnoseal or OEM part number, equipment manufacturer and model, anode dimensions, mounting-hole spacing, weight, material, and photographs of the original part.
These details help distinguish between similar Tecnoseal anodes and reduce the risk of selecting an incompatible version.
