Tecnoseal is an Italian manufacturer specializing in sacrificial anodes and cathodic protection solutions for marine and industrial applications. Tecnoseal anodes are manufactured in Italy and are available in zinc, aluminum, and magnesium for boats, yachts, commercial vessels, propulsion systems, and other equipment exposed to seawater, brackish water, or freshwater.
Tecnoseal Italy produces a broad range of standard and application-specific marine anodes in different shapes, sizes, weights, and mounting configurations. Tecnoseal marine anodes are used for hulls, propeller shafts, propellers, rudders, trim tabs, engines, sterndrives, and other submerged metal components that require sacrificial cathodic protection.
The Tecnoseal group also operates internationally, including Tecnoseal Marine Anodes USA in Florida, supporting customers and marine markets across the Americas.
At Yacht-Supply24.com, we supply Tecnoseal anodes and can assist with product identification, OEM cross-references, material selection, and finding the correct replacement by Tecnoseal part number, original manufacturer reference, dimensions, or application.
Send us your request if you need help identifying the correct Tecnoseal anode or compatible replacement.
|
1-2 weeks delivery time The Tecnoseal 01134 series consists of sacrificial trim tab anodes designed for Yamaha 150–200 HP counter-rotating outboard motors, corresponding to OEM part numbers 6K1-45371-01 and 6K1-45371-02. Each anode features a circular base with an integrated vertical trim tab fin and a central threaded mounting arrangement, providing corrosion protection for submerged metallic lower-unit components. The anode measures 140 mm in overall length (l), 60 mm in height (h) and 100 mm in base diameter (Ø), with additional profile dimensions of 6 mm (h1) and 14 mm (h2). The mounting thread is M10 × 1.25. Three material versions are available: zinc (01134, 660 g), aluminium (01134AL, 260 g) and magnesium (01134MG, 160 g). All versions share the same dimensions and mounting geometry and are intended for counter-rotation applications rather than standard-rotation configurations. |
$ 49.47
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01135 series consists of sacrificial trim tab anodes designed for Yamaha 8–25 HP outboard motors, corresponding to Yamaha OEM part numbers 61N-45251-01 and 61N-45251-00. Each anode features a rectangular plate with a raised central mounting section, a recessed fastening hole and a shaped underside, helping protect submerged metallic outboard components against galvanic corrosion. The anode measures 80 mm in length, 59 mm in width and 26 mm in overall height, with a 16.5 mm mounting recess diameter and a 6.5 mm central through-hole. Three material versions are available: zinc (Tecnoseal 01135, 270 g), aluminium (Tecnoseal 01135AL, 110 g) and magnesium (Tecnoseal 01135MG, 70 g). All versions share identical dimensions and mounting geometry for compatible Yamaha outboard applications. |
$ 52.47
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01136 series consists of sacrificial trim tab anodes designed for Yamaha 9.9–15 HP outboard motors, corresponding to Yamaha OEM part number 66M-45371-00. Each anode features a tall, angled vertical fin attached to a compact mounting base with two fastening holes, helping protect submerged metallic outboard components against galvanic corrosion. The anode measures 53 mm in length (l), 38 mm in width (a) and 62 mm in overall height (h), with 7 mm mounting-hole diameter (Ø). Two material versions are available: zinc (Tecnoseal 01136, 90 g) and magnesium (Tecnoseal 01136MG, 20 g). Both versions share identical dimensions and mounting geometry, allowing selection of the appropriate sacrificial material according to operating water conditions. |
$ 47.58
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01137 is a zinc sacrificial lower unit anode designed for Yamaha 9.9–15 HP outboard motors, corresponding to Yamaha OEM part number 6G8-45251-01. It features a contoured plate-shaped body with an extended mounting section and a recessed central fastening hole, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 100 mm in length (l), 88 mm in width (a) and 22 mm in overall height (h), with a 6.5 mm fastening-hole diameter (Ø) and a 16 mm mounting recess diameter (Ø1). Weighing 0.20 kg (0.44 lbs), this zinc anode is intended as a replacement for the corresponding lower unit component on compatible Yamaha outboard installations. |
$ 25.28
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01138 is a zinc sacrificial plate anode designed for Yamaha Hydra sterndrive systems, corresponding to Yamaha OEM part number 6UA-45251-00. It features a rectangular plate with two raised cylindrical mounting bosses, recessed fastening holes and a reinforced underside, helping protect submerged metallic sterndrive components against galvanic corrosion. The anode measures 99 mm in length (l), 45 mm in width (a) and 32 mm in overall height (h). The mounting-hole centre spacing (i) is 27 mm, with 20 mm recess diameters (Ø) and 9 mm fastening-hole diameters (Ø1). Weighing 0.28 kg (0.62 lbs), this zinc anode is intended for replacement on compatible Yamaha Hydra drive assemblies. |
$ 34.51
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01139 is a zinc sacrificial anode plate designed for Yamaha sterndrive systems manufactured between 1989 and 1990, corresponding to Yamaha OEM part number 6T5-45251-00. It features a U-shaped, open-centre plate with two elongated arms and multiple mounting holes, helping protect submerged metallic sterndrive components against galvanic corrosion. According to the Tecnoseal catalogue, its dimensions are 108 mm (l), 122 mm (a), 62 mm (b) and 10 mm thickness (h), with additional mounting dimensions of 76 mm (i), 93 mm (i1) and 7 mm hole diameter (Ø). Manufactured from zinc, the anode weighs 0.35 kg (0.77 lbs) and is intended as a replacement for the corresponding plate on compatible Yamaha sterndrive assemblies. |
$ 103.28
-
+
| |
|
1-2 weeks delivery time The Tecnoseal 01140 series consists of sacrificial trim tab anodes designed for Yamaha 50–100 HP outboard motors, corresponding to Yamaha OEM part number 67F-45371-00. Each anode features a circular base with an integrated angled vertical fin and a central mounting section, helping protect submerged metallic lower-unit components against galvanic corrosion. It measures 132 mm in overall length (l), 50 mm in height (h) and 92 mm in base diameter (Ø), with an additional profile dimension (h1) of 25 mm and an M10 × 1.25 mounting thread. Three material versions are available: zinc (Tecnoseal 01140, 410 g), aluminium (Tecnoseal 01140AL, 150 g) and magnesium (Tecnoseal 01140MG, 100 g). All three versions share the same dimensions and mounting configuration, allowing selection according to the vessel's operating water conditions. |
$ 33.95
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01141 series consists of sacrificial trim tab anodes designed for Yamaha 25–60 HP outboard motors, corresponding to Yamaha OEM part number 67C-45371-00. Each anode features a circular base with an integrated angled vertical fin and a central recessed mounting hole, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 55 mm in height (h) and 95 mm in base diameter (Ø), with a 17 mm mounting recess diameter (Ø1) and a 9 mm central through-hole diameter (Ø2). Three material versions are available: zinc (Tecnoseal 01141, 220 g), aluminium (Tecnoseal 01141AL, 90 g) and magnesium (Tecnoseal 01141MG, 60 g). All versions share identical dimensions and mounting geometry. The same anode design is also listed under Tecnoseal catalogue reference 01913. |
$ 28.18
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01142 series consists of sacrificial plate anodes designed for Yamaha F6–F9.9 HP outboard engines, corresponding to Yamaha OEM part number 68T-45251-00. Each anode features an elongated oval-shaped body with rounded ends and a central recessed mounting hole, helping protect metallic engine components against galvanic corrosion. The plate measures 64 mm in length (l), 25 mm in width (a) and 12 mm in height (h), with a 5 mm through-hole diameter (Ø) and a 17 mm mounting recess diameter (Ø1). Three material versions are available: zinc (Tecnoseal 01142, 950 g as printed in the catalogue), aluminium (Tecnoseal 01142AL, 40 g) and magnesium (Tecnoseal 01142MG, 30 g). All three versions have the same dimensions and mounting configuration. |
$ 24.62
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01143 series consists of sacrificial trim tab anodes designed for Yamaha 150–225 HP outboard motors, corresponding to Yamaha OEM part number 6J9-45371-00. Each anode features a circular base with an integrated angled vertical fin, an extended horizontal section and a central threaded mounting arrangement, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 87 mm in overall height (h) and 100 mm in circular base diameter (Ø), with an M10 × 1.25 mounting thread (m). Two material versions are available: zinc (Tecnoseal 01143, 520 g) and magnesium (Tecnoseal 01143MG, 130 g). Both versions share identical dimensions and mounting geometry for compatible Yamaha 150–225 HP outboard applications. |
$ 48.37
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01144 series consists of sacrificial trim tab anodes designed for Yamaha 150–200 HP outboard motors, corresponding to Yamaha OEM part number 6K1-45371-00. Each anode features a circular base with an integrated angled vertical fin and a central threaded mounting arrangement, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 75 mm in overall height (h) and 91 mm in circular base diameter (Ø), with an M10 × 1.25 mounting thread (m). Three material versions are available: zinc (Tecnoseal 01144, 410 g), aluminium (Tecnoseal 01144AL, 160 g) and magnesium (Tecnoseal 01144MG, 100 g). All versions share the same dimensions and mounting geometry, allowing selection of the appropriate sacrificial anode material according to the vessel's operating water conditions. |
$ 51.64
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01145 series consists of sacrificial trim tab anodes designed for Yamaha 200–300 HP outboard motors, corresponding to Yamaha OEM part number 69L-45371-00. Each anode features a circular base with an integrated angled vertical fin, an extended horizontal section and a central threaded mounting arrangement, helping protect submerged metallic lower-unit components against galvanic corrosion. The anode measures 100 mm in base diameter (Ø), with profile dimensions of 30 mm (h) and 60 mm (h1), and an M10 × 1.25 mounting thread (m). Three material versions are available: zinc (Tecnoseal 01145, 640 g), aluminium (Tecnoseal 01145AL, 260 g) and magnesium (Tecnoseal 01145MG, 170 g). All three versions share identical dimensions and mounting geometry, allowing selection of the appropriate sacrificial material according to the vessel's operating water conditions. |
$ 50.24
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01146 series consists of sacrificial internal engine anodes designed for Yamaha 80–300 HP outboard motors, corresponding to Yamaha OEM part number 67F-11325-00. Each anode features a compact cylindrical body with a raised square-profile section and an internal M6 threaded mounting hole, providing corrosion protection for metallic components within the engine crankcase and cylinder assembly. The anode measures 32 mm in overall length (l) and 23 mm in diameter (Ø), with additional profile dimensions of 5 mm (a), 17 mm (b), 10 mm (c) and 15 mm (h). Three material versions are available: zinc (Tecnoseal 01146, 70 g), aluminium (Tecnoseal 01146AL, 27 g) and magnesium (Tecnoseal 01146MG, 20 g). All versions share identical dimensions and mounting geometry. The same anode design is also listed under Tecnoseal references 01914 and 00846. |
$ 19.16
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01146-1 series consists of sacrificial internal engine anodes for Yamaha 75–350 HP applications and SX/FX WaveRunner models listed for 2006–2009, corresponding to Yamaha OEM part number 6ML-11325-01. Each anode features a stepped cylindrical body with a square-profile end and an axial M6 threaded mounting hole, designed to help protect metallic crankcase and cylinder components against corrosion. The anode measures 32 mm in overall length (l) and 23 mm in body diameter (Ø), with additional dimensions of 14 mm (a), 7 mm (b) and 14 mm (h). Three material versions are available: zinc (Tecnoseal 01146-1, 50 g), aluminium (Tecnoseal 01146-1AL, 20 g) and magnesium (Tecnoseal 01146-1MG, 10 g). All versions share the same dimensions and mounting configuration. |
$ 15.39
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01147 series consists of small sacrificial internal engine anodes designed for Yamaha 40–90 HP outboard motors, corresponding to Yamaha OEM part number 688-11325-00. Each anode features a compact, shaped metal body with a U-shaped recess, an angled mounting section and a 5 mm fastening hole, intended to protect metallic components in the engine crankcase and cylinder assembly against corrosion. The anode measures 23 mm in overall length (l), 20 mm in height (h), with an additional dimension (l1) of 7 mm and a 5 mm mounting-hole diameter (Ø). Two material versions are available: zinc (Tecnoseal 01147, 10 g) and magnesium (Tecnoseal 01147MG, 3 g). Both versions share the same dimensions and mounting geometry. The same anode design is also listed under Tecnoseal catalogue reference 01759. |
$ 13.57
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01148 series consists of small cylindrical sacrificial anodes designed for Yamaha 4–70 HP outboard engines, corresponding to Yamaha OEM part number 6G8-11325-00. Intended for internal crankcase and cylinder applications, each anode features a slightly tapered cylindrical body with an axial mounting hole, helping protect metallic engine components against corrosion. The anode measures 16 mm in height (h), 13 mm in maximum outside diameter (Ø), 12 mm in secondary outside diameter (Ø1) and 5.50 mm in through-hole diameter (Ø2). Three material versions are available: zinc (Tecnoseal 01148, 10 g), aluminium (Tecnoseal 01148AL, 6 g) and magnesium (Tecnoseal 01148MG, 4 g). All versions share identical dimensions and mounting geometry. The catalogue also lists references 00844, 01750 and 01408-2 as alternative anode references for this design. |
$ 13.91
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01149 series consists of cylindrical sacrificial pencil anodes designed for internal crankcase and cylinder applications on Yamaha 25–250 HP outboard engines, corresponding to Yamaha OEM part number 62Y-11325-00. Each anode features an elongated metal body with an 8.5 mm outside diameter and an internal M5 threaded mounting hole at one end, helping protect metallic engine components against corrosion. It measures 50 mm in overall length (l), with a 12 mm threaded-section depth (l1). Three material versions are available: zinc (Tecnoseal 01149, 20 g), aluminium (Tecnoseal 01149AL, 8 g) and magnesium (Tecnoseal 01149MG, 6 g). All versions share the same dimensions and mounting configuration. The catalogue also lists Tecnoseal reference 01755 as an alternative reference for this anode design. |
$ 19.74
Type:
Item:
| |
|
1-2 weeks delivery time The Tecnoseal 01150 series consists of small sacrificial internal engine anodes designed for Yamaha 20–250 HP outboard motors, corresponding to Yamaha OEM part number 6J8-11325-00. Each anode features an elongated tapered body with a circular mounting head and a square-profile opening, intended to help protect metallic crankcase and cylinder components against galvanic corrosion. According to the Tecnoseal catalogue, the anode measures 41 mm in overall length (l), 13 mm in height (h), with a mounting head diameter (Ø) of 16.5 mm and an 8 mm end diameter (Ø1). Additional profile dimensions are 4 mm (a) and 2 mm (b). Two material versions are available: zinc (Tecnoseal 01150, 20 g) and magnesium (Tecnoseal 01150MG, 4 g). Both versions share identical dimensions and mounting geometry. The same anode design is also listed under Tecnoseal catalogue reference 00831. |
$ 30.57
Type:
Item:
| |
What is Tecnoseal known for in the marine industry?
Tecnoseal specializes in sacrificial anodes and cathodic protection products for leisure boats, yachts, commercial vessels, and other marine applications. Its range includes zinc, aluminum, and magnesium anodes for propulsion systems, engines, hull components, shafts, propellers, rudders, trim tabs, and other underwater equipment.
Where are Tecnoseal anodes manufactured?
Tecnoseal is based in Grosseto, Italy, and its anodes are designed and manufactured in Italy. The company supplies marine and industrial cathodic protection products to customers in international markets.
Does Tecnoseal operate in the USA?
Yes. Tecnoseal Marine Anodes USA operates in Florida and supports the Tecnoseal range for the American market. Tecnoseal also maintains operations in several other international markets.
Can Tecnoseal anodes be used as replacements for original OEM anodes?
Many Tecnoseal anodes are designed as compatible replacements for original marine equipment. The correct Tecnoseal part can often be identified using the OEM reference, engine or drive model, or the part number of the existing anode.
Dimensions, mounting-hole spacing, shape, material, and weight should also be checked before installation.
How can I find a Tecnoseal anode if I only know the original manufacturer part number?
OEM part numbers can often be cross-referenced with Tecnoseal catalogue numbers to identify a compatible replacement. This is useful when replacing anodes fitted to engines, sterndrives, propellers, shafts, and other branded marine equipment.
If the original reference is unavailable, the equipment model together with photographs and anode dimensions can help identify the correct product.
What information is useful when selecting a Tecnoseal replacement anode?
Useful information includes the Tecnoseal or OEM part number, equipment manufacturer and model, anode dimensions, mounting-hole spacing, weight, material, and photographs of the original part.
These details help distinguish between similar Tecnoseal anodes and reduce the risk of selecting an incompatible version.
