E. Polipodio is an Italian family-owned company specializing in cathodic protection and marine corrosion prevention solutions. Founded in 1953 and active in cathodic protection since 1957, the company designs and manufactures products and systems for boats, yachts, commercial vessels, offshore structures and industrial applications.
The E. Polipodio marine range includes sacrificial anodes, cathodic protection systems and Marine Growth Prevention Systems (MGPS) designed to protect underwater metal components and seawater systems from corrosion and fouling. Its products are manufactured at the company's facility in Genoa, Italy, combining decades of specialist experience with solutions for both recreational and professional marine applications.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yachtsupply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yachtsupply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time E. Polipodio zinc shaft collar anodes for propeller shafts, supplied complete with screws and available for shaft diameters from Ø20 to Ø85 mm. Depending on the selected version, the outside diameter ranges from Ø60 to Ø140 mm and the anode height from 15 to 29 mm. The range includes 16 zinc (ZN) configurations for shaft diameters 20, 22, 25, 28, 30, 32, 35, 38, 40, 45, 50, 55, 60, 70, 80 and 85 mm. Select the required version according to the propeller shaft diameter and corresponding outside dimensions. |
$ 11.50
Shaft Diameter:
|
|
1-2 weeks delivery time E. Polipodio zinc shaft collar anodes for marine shaft installations, available for shaft diameters from Ø18 to Ø85 mm. The range includes 16 zinc (ZN) models with shaft sizes of 18, 22, 25, 28, 30, 32, 35, 38, 40, 45, 50, 55, 70, 75, 80 and 85 mm. Depending on the selected version, the outside diameter ranges from Ø50 to Ø122 mm and the overall height from 47 to 108 mm. Select the required model primarily according to shaft diameter A and verify the corresponding outside diameter B and height H. |
$ 15.58
Shaft Diameter:
|
|
1-2 weeks delivery time E. Polipodio AN029 zinc shaft collar anode for Ø90 mm shaft installations, cross-referenced in the Trem catalogue as L8105090. The split anode has an internal diameter A of Ø90 mm, an overall outside diameter B of Ø128 mm and an overall height H of 100 mm. Manufactured from zinc (ZN). |
$ 177.17
-
+
|
|
1-2 weeks delivery time E. Polipodio zinc spare shaft anodes for Radice shaft installations, supplied as anode only and available for shaft sizes from Ø22–25 mm up to Ø60 mm. The range includes RA-1E, RA-2E, RA-2GE, RA-3E, RA-4E, RA-5E, RA-5GE and RA-6E configurations. Depending on the model, dimension A ranges from 32 to 82 mm, B from 26 to 64 mm, E from 23 to 56 mm and overall height H from 39 to 96 mm. E. Polipodio references RA030, RA031, RA032, RA033, RA034, RA035, RA060 and RA036 correspond to Trem references L8110625, L8110630, L8110635, L8110640, L8110645, L8110650, L8110655 and L8110660 respectively. Select the required version according to shaft diameter, model and A, B, E and H dimensions. |
$ 10.99
Shaft Diameter:
|
|
1-2 weeks delivery time E. Polipodio Radice conical shaft nut zinc anodes for shaft diameters from Ø25 to Ø60 mm. The range includes eight versions with overall diameter A from 32 to 82 mm, internal dimension B from 16 to 46 mm, lower internal dimension C from 25 to 71 mm and overall height H from 39 to 95 mm. All variants are manufactured in zinc and are selected primarily according to the propeller shaft diameter. Trem references L8110225–L8110260 correspond to E. Polipodio articles RA002, RA005, RA008, RA011, RA014, RA017, RA020 and RA023. |
$ 7.52
Shaft Diameter:
|
|
1-2 weeks delivery time E. Polipodio stainless steel washers for Radice shaft anodes, available in eight sizes for models from Ø25 to Ø60 mm. Depending on the version, outside diameter A ranges from Ø38 to Ø90 mm, internal diameter B from Ø17 to Ø46 mm and K dimension from 5.8 to 16 mm. Polipodio references RA003, RA006, RA009, RA012, RA015, RA018, RA021 and RA024 correspond to Trem references L8115016, L8115020, L8115024, L8115025, L8115033, L8115037, L8115040 and L8115045 respectively. Select the required washer according to Radice model size and A, B and K dimensions. |
$ 7.91
Shaft Diameter:
|
|
1-2 weeks delivery time E. Polipodio AX004 aluminium sacrificial anode for hull and stern frame applications. The anode measures 320 x 65 x 35 mm and weighs 1.2 kg, providing a large-format aluminium anode configuration for marine hull and stern installations. |
$ 84.28
-
+
|
|
1-2 weeks delivery time E. Polipodio MG004 magnesium sacrificial anode for hull and stern frame applications. The anode measures 320 x 65 x 35 mm and weighs 0.7 kg, providing a lightweight magnesium configuration for marine hull and stern installations. |
$ 70.06
-
+
|
|
1-2 weeks delivery time E. Polipodio rectangular zinc sacrificial anodes for marine flap installations, available in four sizes. The range includes anode body dimensions of 73x48x10 mm, 110x67x20 mm, 130x50x17 mm and 190x54x24 mm, with mounting-hole centre distances (C) of 50, 57, 77 and 76 mm respectively. Anode weights range from 0.330 to 1.450 kg. Select the required version according to length A, width B, height D, mounting-hole spacing C and weight.
|
$ 32.06
Size:
Item:
|
|
1-2 weeks delivery time E. Polipodio NC019 zinc anode for rudders and flaps, model FP-1 and cross-referenced in the Trem catalogue as L8120206. The rectangular anode measures 110 x 70 x 20 mm and features two Ø7 mm mounting holes with 57 mm centre-to-centre spacing. Manufactured from zinc (ZN) for rudder and flap installations. |
$ 36.02
-
+
|
|
1-2 weeks delivery time E. Polipodio zinc anode for rudders and flaps, model FX-2V, with an overall size of 150 x 60 x 25 mm and a weight of 1.00 kg. The anode features two mounting points positioned 80 mm centre-to-centre, with the catalogue drawing specifying Ø11x15 and Ø11 mounting-hole dimensions. Manufactured from zinc (ZN) for rudder and flap installations. |
$ 31.83
-
+
|
|
1-2 weeks delivery time E. Polipodio zinc anode for rudders and flaps, model FX-3V, measuring 250 x 65 x 28 mm and weighing 2.40 kg. The anode features two mounting points with 140 mm centre-to-centre spacing, with the catalogue drawing specifying Ø11x15 and Ø11 mounting-hole dimensions. Manufactured from zinc (ZN) for rudder and flap installations. |
$ 92.60
-
+
|
|
1-2 weeks delivery time E. Polipodio zinc anode for rudders and flaps, model FD-1, measuring 150 x 45 x 20 mm. The anode features two Ø7 mm mounting holes positioned 52 mm centre-to-centre. Manufactured from zinc (ZN) and cross-referenced in the Trem catalogue as L8120205. |
$ 17.07
-
+
|
|
1-2 weeks delivery time E. Polipodio NC032 zinc anode for rudders and flaps, model FD-2, measuring 85 x 45 x 20 mm. The anode features two Ø7 mm mounting holes positioned 33 mm centre-to-centre. Manufactured from zinc (ZN) and cross-referenced in the Trem catalogue as L8120203. |
$ 12.50
-
+
|
|
1-2 weeks delivery time E. Polipodio NC058 zinc anode for hull and transom applications, measuring 100 x 50 x 10 mm. The rectangular anode features two mounting holes positioned 50 mm centre-to-centre, with an 8 mm hole dimension shown in the catalogue drawing. Manufactured from zinc (ZN) and cross-referenced in the Trem catalogue as L8120105. |
$ 19.96
-
+
|
|
1-2 weeks delivery time E. Polipodio ZX038 zinc anode for Fairline and Sunseeker hull and transom applications, model FX-7L. The anode measures 447 x 90 x 40 mm and weighs 7.00 kg. It features two mounting points with 231 mm centre-to-centre spacing and Ø19x28 mounting-hole dimensions according to the catalogue drawing. Manufactured from zinc (ZN) and cross-referenced in the Trem catalogue as L8120023. |
$ 186.55
-
+
|
|
1-2 weeks delivery time E. Polipodio ZX020 zinc anode for Fairline hull and transom applications, model FX-3D/ZN. The anode measures 320 x 65 x 35 mm and weighs 2.40 kg. It features two elongated mounting slots positioned 160 mm centre-to-centre, with slot dimensions Ø12x65 mm according to the catalogue drawing. Manufactured from zinc (ZN) and cross-referenced in the Trem catalogue as L8120412. |
$ 90.99
-
+
|
|
1-2 weeks delivery time E. Polipodio ZX010B zinc anode for hull and transom applications, model FX-5B, weighing 4.00 kg. The anode measures 325 mm in length and 80 mm in width, with two mounting holes positioned 200 mm centre-to-centre. The catalogue drawing specifies Ø16x26 mm mounting-hole dimensions. Manufactured from zinc (ZN) and cross-referenced in the Trem catalogue as L8120420. |
$ 104.29
-
+
|