Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDBM-01 Battery Monitor accurately reports voltage, current, and battery health to NMEA 2000. Designed for marine batteries, it can manage a variety of DC sources and loads. It includes a MicroSD slot for easy configuration and firmware updates and requires an external shunt for proper operation. Compatible with various NMEA 2000 networks, it ensures reliable battery management and alerts when critical conditions arise. |
€ 166,32
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDTA-01 Tank Adapter connects resistive or voltage type fluid level sensors to NMEA 2000 devices, allowing you to monitor fluid levels on chart plotters and displays. It supports various fluid types and can be configured for up to 16 tanks. Compatible with multiple sensor standards, it offers easy installation and calibration for accurate readings. |
€ 166,32
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDTA-04 Tank Adapter allows connection of up to four resistive or voltage type fluid level sensors to NMEA 2000 devices. It supports various fluid types and can be configured for up to 16 tanks. Compatible with multiple sensor standards, it offers easy installation and calibration for accurate fluid level readings on chart plotters. |
€ 219,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDNG-03 NMEA 0183 Gateway connects NMEA 0183 equipment to NMEA 2000 networks, supporting various message types including AIS and autopilot. It features a configurable baud rate, supports RS-232 and RS-422 connections, and includes a MicroSD card slot for easy configuration and firmware updates. Compatible with a wide range of marine electronics. |
€ 166,32
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDRA-01 Rudder Adapter connects resistive type rudder angle sensors to NMEA 2000 networks, providing autopilots, chart plotters, and other devices with accurate rudder angle data. It supports various sensor types and offers easy installation, calibration, and configuration through a MicroSD card slot. |
€ 166,32
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDVR-04 Voyage Recorder captures GPS tracks, wind, depth, temperature, AIS, and other NMEA 2000 network data during your voyages. It features an audio input for recording VHF or microphone output, storing data on a MicroSD card for analysis, logbook generation, and diagnostics. Compatible with multiple formats and software for extensive data management. |
€ 254,32
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDSR-01 Smart Relay helps manage two loads with a single power switch, ideal for applications like combined deck/steaming lights. It features a bi-stable relay, low power consumption, and can handle 7-28V DC loads up to 10A continuous current. Easy to install, it ensures efficient load switching without constant power draw. |
€ 87,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices YDNB-07 NMEA 2000 Bridge unifies two physical NMEA 2000 networks into a single logical network, enabling smooth message exchange and supporting filtering and message processing. It helps bypass network length and device limits, ensures compatibility, and offers diagnostics and programming capabilities. |
€ 219,12
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices BRP-CAN - BRP CAN (Bombardier Rotax) Adaptor (Cable For Engine Gateway YDEG-04) supports up to two BRP engines on a network, and eight engines for J1939 and Volvo Penta EVC. It allows you to monitor engine speed, hours, temperature, boost pressure, keyswitch battery voltage, fuel rate, tank level, and engine warnings on NMEA 2000 instruments. The BRP protocol operates at 500 kbps, unlike the 250 kbps for J1939, and can be activated by updating the configuration file with specific settings. Engine data can be accessed via the diagnostics connector near the fuse box. |
€ 34,32
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CATERPIL-D12 is a 12-pin adaptor cable for the Engine Gateway YDEG-04, which now supports Caterpillar engines. It provides essential engine data to NMEA 2000 instruments, including engine speed, hours, temperature, boost pressure, keyswitch battery voltage, fuel rate, fuel tank level, and engine warnings transmitted in J1939 messages with PGN 65226. |
€ 43,12
-
+
|
|
Yacht Devices CATERPIL-D9 - Caterpillar Round 9-pin Adaptor Cable (Cable For Engine Gateway YDEG-04)
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CATERPIL-D9 cable enables seamless integration of the Caterpillar D9 motor with the YDEG-04 Engine Gateway interface, ensuring reliable connectivity and efficient communication between the engine and the gateway system. |
€ 43,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CATERPIL-J17 is a robust adaptor cable designed for seamless connectivity to Caterpillar J1708 engine gateways, ensuring reliable data transfer and optimal engine performance. Easy to install and built to withstand demanding marine environments, it enhances engine diagnostics and monitoring for both professionals and boat enthusiasts. |
€ 43,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices CUMMINS-D9, a Cummins Round 9-pin Adaptor Cable, allows seamless connection of the Cummins D9 motor with the YDEG-04 Engine Gateway interface, ensuring compatibility and efficient engine communication. |
€ 43,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT Enhance your NMEA 2000 instruments with the Yacht Devices EFI-10PIN adaptor cable, enabling access to vital engine data including speed, hours, temperature, boost pressure, battery voltage, fuel metrics, tank levels, and J1939 warnings. |
€ 43,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices EVC-A-EC12 enables connection for up to eight Volvo Penta EVC-A EC 12-PIN X5 engines on a network, providing essential engine data like speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and warnings via NMEA 2000 instruments. |
€ 43,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices EVC-A-M enables monitoring of up to eight Volvo Penta EVC-A engines via NMEA 2000 instruments, providing essential data like engine speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and engine warnings via J1939 messages. |
€ 34,32
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT The Yacht Devices EVC-A-MC12 facilitates seamless integration of up to eight Volvo Penta EVC-A MC 12-PIN C5 engines on a network, enhancing NMEA 2000 instruments with essential engine data like speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and critical warnings via J1939 messages. |
€ 43,12
-
+
|
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Yacht Devices EVC-VODIA, an 8-pin EVC/Vodia Volvo Engine Gateway Adaptor. Updated firmware now supports up to eight Volvo Penta EVC engines on a network, delivering vital engine data such as speed, hours, temperature, boost pressure, battery voltage, fuel rate, fuel level, and warnings via NMEA 2000 instruments. |
€ 34,32
-
+
|
What are the primary functions of Yacht Devices marine electronics?
Yacht Devices marine electronics primarily function to integrate various onboard systems using NMEA 2000 and NMEA 0183 protocols. The Engine Gateway YDEG-04, for example, allows engines to connect to the NMEA 2000 marine electronics network, providing data such as engine revolutions, fuel rate, and fluid levels to chart plotters and instrumental displays. These devices are compatible with equipment from many brands and they support bi-directional communication, enabling seamless data exchange and system control across the entire marine digital network.
Yacht Devices, established as a leader since 2015, focuses on NMEA-2000 marine electronics, adhering to standards set by the National Marine Electronics Association. Their products, such as the NMEA 0183 gateway, allow you to connect NMEA 0183 equipment to a NMEA 2000 network and vice versa, ensuring versatile integration. The gateway YDWG-02 and other devices like the Garmin NMEA 2000 and Simrad offer broad compatibility. They allow users to see and manage data on chart plotters and PC screens, update firmware, and handle various navigation data, including AIS messages from vessels and aircraft. These gateways also support engines with a J1939 serial interface, enabling monitoring of fluid levels on NMEA 2000 devices. Yacht Devices' electronics, such as the bi-directional converter, provide wide support for message types, ensuring comprehensive system integration and control.
What role does a NMEA 0183 multiplexer play in a yacht's electronic system?
A NMEA 0183 multiplexer plays a crucial role in a yacht's electronic system by allowing multiple NMEA 0183 data sources, such as GPS, AIS, and depth sounders, to be combined and transmitted through a single output. This ensures seamless integration and communication between various marine devices and the yacht's navigation system. Additionally, it can interface with NMEA 2000 networks via a gateway, enhancing the overall efficiency and functionality of the yacht's electronics.
What role does the Seatalk adapter play in connecting Raymarine devices to NMEA 2000 networks?
The Seatalk adapter plays a crucial role in connecting Raymarine devices to NMEA 2000 networks by acting as a bridge between the proprietary Seatalk protocol and the standardized NMEA 2000 marine digital network. This adapter allows you to see data from a NMEA 2000 network on Raymarine devices and vice versa, ensuring seamless integration and communication. It is equipped with NMEA 2000 functionality, enabling yacht owners to connect 0183 equipment to a NMEA 2000 network and providing a reliable interface to manage engine data, fluid levels, and other navigation information.