ID
1103137
$ 57.05
1-2 weeks delivery time
-
+
The Yacht Devices EFI-10PIN is a 10-pin Engine Gateway adaptor cable designed to connect supported EFI gasoline engines to the YDEG-04 Engine Gateway. It is intended for engines equipped with MEFI4B ECU or later, including petrol models from 2004/2005 with or without EVC, and enables supported engine data to be displayed on NMEA 2000 instruments, including engine speed, engine hours, engine temperature, boost pressure, keyswitch battery voltage, fuel rate, fuel tank level and engine warnings transmitted via J1939 PGN 65226. The YDEG-04 manual confirms support for EFI engines with MEFI4B or later controllers and specifies use of an adaptor cable for the Marine Data Link Connector.
- Description
- Ask a Question
-
Yacht Devices EFI-10PIN 10-Pin Engine Gateway Adaptor Cable for YDEG-04 and MEFI4B EFI Engines
The Yacht Devices EFI-10PIN is a 10-pin adaptor cable designed for connecting supported EFI gasoline engines to the YDEG-04 Engine Gateway interface. It provides the required connection between the engine's EFI system and the gateway, allowing supported engine information to be transferred to the vessel's NMEA 2000 network.
The adaptor is intended for EFI engines equipped with an MEFI4B ECU or later, including petrol engine models from 2004/2005 with or without an EVC system. The YDEG-04 documentation confirms support for MEFI4B and later EFI controllers and specifies that an adaptor cable for the Marine Data Link Connector is required for this type of installation.
Supported Engine Data
- Engine speed
- Engine hours
- Engine temperature
- Boost pressure
- Keyswitch battery voltage
- Fuel rate
- Fuel tank level
- Engine warnings transmitted in J1939 messages with PGN 65226
Technical Specifications
Parameter Specification Product type Engine Gateway adaptor cable Part number EFI-10PIN Connector format 10-pin Gateway compatibility YDEG-04 Engine Gateway Engine type EFI gasoline engines Supported ECU MEFI4B or later Applicable engine period Petrol models from 2004/2005 EVC compatibility With or without EVC Data output NMEA 2000 instruments through YDEG-04
Application
- Connects supported EFI engines to the YDEG-04 Engine Gateway
- Suitable for MEFI4B ECU and later EFI systems
- Supports installations with or without EVC
- Provides access to supported engine operating and warning data on NMEA 2000 instruments
Installation Note
According to the YDEG-04 documentation, only EFI engines equipped with an MEFI4B controller or later are supported for this connection type. An adaptor cable for the Marine Data Link Connector is required, and older MEFI3 and MEFI4 systems are not compatible with the YDEG-04.
-
Popular products
-
1-2 weeks delivery time$ 57.05 -
1-2 weeks delivery time$ 57.05 -
1-2 weeks delivery time$ 57.05 -
1-2 weeks delivery time$ 57.05 -
1-2 weeks delivery time$ 45.41 -
1-2 weeks delivery time$ 57.05 -
1-2 weeks delivery time$ 45.41 -
1-2 weeks delivery time$ 45.41 -
1-2 weeks delivery time$ 57.05 -
1-2 weeks delivery time$ 22.13