VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus BOW1604DI is an IP65 ignition-protected bow thruster delivering 160 kgf thrust at 24 V for Ø250 mm tunnel installations. It is designed for vessels from 13.5 to 20.5 meters and includes sealed installation hardware to ensure safe integration in compartments containing fuel or gas vapors. A watertight housing provides protection against ignition and corrosion. |
$ 7,059.64
-
+
|
|
1-2 weeks delivery time The Vetus STE5512D is a retractable swing bow thruster delivering 55 kgf thrust at 12 V, designed for shallow draft boats or vessels with cutaway forefoots and raised sterns. It features a compact ducted propeller for efficient thrust, a retractable mechanism to reduce drag under sail, and electronic safeguards that prevent overload and eliminate gear stress. |
$ 9,246.50
-
+
|
|
1-2 weeks delivery time The Vetus STE6012D is a retractable swing bow and stern thruster designed for shallow draft vessels, providing 65 kgf thrust at 12 V. It uses a short duct propeller for efficient thrust delivery and retracts automatically when not in use to reduce drag while sailing. The system includes overload protection, a jam-safe swing mechanism, and timed direction-change delay to protect internal components. |
$ 10,360.46
-
+
|
|
1-2 weeks delivery time The Vetus STE7512D is a 12-volt retractable swing bow and stern thruster delivering 80 kgf thrust. Its short duct design maximizes thrust efficiency while the retractable housing reduces drag under sail. Built-in overload and jam protection protects the swing system, and V-CAN connectivity enables seamless integration into onboard electronic control networks. |
$ 10,787.47
-
+
|
|
1-2 weeks delivery time The Vetus STE9512D is a high-performance retractable swing bow and stern thruster delivering 95 kgf thrust at 12 V. Its short-duct hydrodynamic propeller maximizes thrust efficiency, while the retractable mechanism significantly reduces drag during sailing. Integrated electronic safeguards help prevent overload and protect the swing mechanism for reliable manoeuvring. |
$ 11,900.76
-
+
|
|
1-2 weeks delivery time The Vetus BOW55HMD is a hydraulic bow thruster delivering 55 kgf thrust for Ø150 mm tunnel installations. With a 3.5 kW hydraulic motor and virtually unlimited runtime, it provides dependable continuous operation for bow or stern integration on GRP, steel, or aluminum vessels without requiring onboard electrical thruster power. |
$ 2,901.45
-
+
|
|
1-2 weeks delivery time The Vetus BOW95HMD is a hydraulic bow thruster delivering 95 kgf thrust with a 6.0 kW hydraulic motor, designed for Ø185 mm tunnel installations on GRP, steel, or aluminum vessels. It supports bow or stern mounting and provides continuous operational capability without electrical load at the thruster. |
$ 3,605.26
-
+
|
|
1-2 weeks delivery time The Vetus BOW160HMD is a hydraulic bow thruster delivering 160 kgf thrust with a 12.3 kW hydraulic motor for Ø250 mm tunnels in GRP, aluminum, or steel hulls. It supports continuous running and can be installed at the bow or stern without requiring a high-current electrical supply at the thruster. |
$ 4,837.76
-
+
|
|
1-2 weeks delivery time The Vetus BOW230HMD is a hydraulic bow thruster delivering 230 kgf thrust using a 16.4 kW hydraulic motor, designed for installation in Ø300 mm tunnels. It supports continuous operation and can be mounted in the bow or stern on GRP, steel, or aluminum vessels without requiring onboard high-current electrical wiring. |
$ 6,595.59
-
+
|
|
1-2 weeks delivery time The Vetus BOW310HMD is a hydraulic bow thruster providing 310 kgf thrust with a 26.8 kW hydraulic motor for Ø300 mm tunnel installations. Supporting continuous operation with no electrical supply required at the thruster, it is suitable for bow or stern mounting on steel, aluminum, or GRP vessels. |
$ 7,123.63
-
+
|
|
1-2 weeks delivery time The Vetus BOWH410 is a continuous-duty hydraulic bow thruster delivering 4100 kgf thrust with a 63 kW hydraulic motor for Ø400 mm tunnel systems. Designed for bow or stern installation on GRP, aluminum, or steel vessels, it ensures maximum control and reliability during demanding manoeuvres without requiring high-current electrical systems. |
$ 12,842.32
-
+
|
|
1-2 weeks delivery time The Vetus BOWH550 is a hydraulic bow thruster delivering 5500 kgf thrust with a 108 kW hydraulic motor, designed for Ø400 mm tunnels. Built for continuous operation in demanding manoeuvring conditions, it integrates seamlessly into GRP, steel, or aluminum vessels and can be installed at the bow or stern. |
$ 14,952.40
-
+
|
|
1-2 weeks delivery time The Vetus BP1053 is a spare 10.5'' bronze propeller designed specifically for BOW22024/BOW230HM bow thrusters. This replacement element restores proper thrust performance by replacing a worn or damaged propeller with a matching bronze unit. The anode for this propeller must be ordered separately. Article: BP1053. |
$ 960.47
-
+
|
|
1-2 weeks delivery time The Vetus BP1182 is a durable 10.5'' bronze spare propeller designed for BOW300HM and BOW310HM bow thrusters. It ensures reliable propulsion performance and restores correct maneuverability when replacing a worn or damaged propeller. A zinc anode is required but not included and must be ordered separately. Article: BP1182. |
$ 960.47
-
+
|
|
1-2 weeks delivery time The Vetus BP1260 is a spare bronze propeller designed for BOW550HM bow thrusters, featuring dimensions 15.2” x 13" x 3B x 0.60 for efficient thrust performance. It serves as a direct replacement to maintain proper maneuverability and operational reliability. Article: BP1260. |
$ 1,047.78
-
+
|
|
1-2 weeks delivery time The Vetus BP110G75 is a high-quality GRP thruster tunnel designed for bow thruster installation in GRP-hulled yachts and small craft. It features an internal diameter of 110 mm and a length of 750 mm, manufactured from durable glassfibre reinforced polyester for excellent corrosion resistance. Article: BP110G75. |
$ 97.66
-
+
|
|
1-2 weeks delivery time The Vetus BP110G10 is a GRP bow thruster tunnel designed for installation in GRP-hulled yachts and small craft. It features a 110 mm internal diameter and a 1000 mm length, made from durable glassfibre reinforced polyester for high corrosion resistance. Suitable for bow thruster models such as BOW2512. Article: BP110G10. |
$ 129.31
-
+
|
|
1-2 weeks delivery time The Vetus BP110G15 is a GRP bow thruster tunnel designed for installation in GRP-hulled yachts and small craft. It features a 110 mm internal diameter and a 1500 mm length, manufactured from corrosion-resistant glassfibre reinforced polyester for long-term durability. Article: BP110G15. |
$ 276.80
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.