VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus EP46845 high-temperature alarm interface module is intended for monitoring and early detection of elevated engine temperatures in marine engine systems. It is described as an interface component engineered to Vetus standards and designed for integration into a vessel’s marine system to provide high-temperature alarm functionality and protective temperature monitoring. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus SN4004 locking tab washer is a stainless steel shaft-hardware component specified for 40mm propeller shaft assemblies. It is used to support secure fastening by locking the assembly and helping prevent loosening in propulsion system installations. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VSTICKDIE diesel sticker set is a 50x20cm labeling decal intended for diesel-related applications. It is produced from high-quality materials for durability and resistance to outdoor elements, supporting long-lasting visibility for equipment identification in both indoor and outdoor environments. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus 08-00364 shutdown stop magnet assembly is engineered for DEUTZ 4-cylinder engines and serves as an essential control component for the engine shutdown process. It is specified as a precisely designed unit intended to support smooth and reliable stop operation in the applicable engine configuration. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus HS66 automatic balancing overflow valve is intended for hydraulic pressure regulation on HTP3010 and HTP4010 helm pumps (without built-in check valve) and for use with MTC52-MTC175 cylinders. It is specified as an overflow valve that maintains pressure balance within the hydraulic system and is used to prevent overflows in compatible steering installations. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VB330 Explorer inflatable boat is a 330 cm long V Quipment craft finished in yellow and supplied in a configuration without a floor. This layout allows selection of compatible floor options, including the VB025 Alu aluminum floor or the VB010 inflatable floor, depending on the intended setup. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus HT5017 hydraulic valve component is configured as a 4/3 valve in NG6 size and is specified for control in A-B--T positions within hydraulic systems. This precision-engineered valve is intended for efficient control and regulation and is described as suitable for marine and industrial hydraulic setups requiring a 4/3, NG6, A-B--T configuration. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus IV300012 inverter unit is a 3000W pure sine wave, high-frequency DC/AC conversion assembly specified as 12V-230V, 50Hz and described for converting 12 or 24 Volt DC to 230 Volt AC for a wide range of electronic equipment. It includes a shore power connection with an in-built UPS (uninterruptable power supply) function for automatic changeover when shore power is disconnected, maintains nominal power without de-rating up to 75°C, and integrates automatic protection against overload, high/low battery voltage, high temperature, short-circuit, and reverse battery polarity, with LED bar indication for battery voltage and power consumption and optional remote control panel support. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus WRCCAB WRC interconnection cable is intended for the remote control WRC male to male system and is used to support communication between system components. It is supplied with a stated cable length of 21 cm to allow flexible installation in marine control equipment. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus MTC816 flexible hose connection kit is a Ø8x10 mm rubber hose set intended for use with all 10 mm cylinders, supplied as a pair of pre-made 650 mm high-pressure hydraulic hose assemblies manufactured by Manuli. Each hose assembly is configured with a compression fitting on one end and a straight 10 mm tube connector on the other end for cylinder connection in marine or industrial hydraulic installations. |
Our managers will contact you and clarify the terms of the order
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.