The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 37202-2024 diaphragm bilge and shower pump delivers 24V DC pumping performance with up to 13 L/min (about 2.8–2.9 GPM) flow for marine drainage needs. It self-primes up to 2 m and supports a maximum recommended head of 3 m, while the diaphragm design allows extended dry running without damage. With 19 mm (3/4 in) hose connections, quiet running, corrosion-resistant construction, and an included 20-mesh strainer, it is built for reliable service in demanding onboard environments.
|
$ 506.71
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37255-0092 toilet conversion kit upgrades compatible manual Jabsco toilets to a quiet 12V electric flush system for marine (and RV) use. It combines a PAR-Max 4 self-priming flush pump for sea, lake, or river water rinsing with a high-capacity waste macerator and bowl discharge pump for smooth waste handling, while keeping water use to approximately 1–2 liters per flush. Supplied with a single-button flush actuator and dual-function water level control switch, it supports 19 mm (3/4 in) inlet and 25 mm (1 in) discharge connections, includes a 38 mm (1-1/2 in) waste plumbing adaptor, and specifies 10 A amperage with a 25 A fuse for dependable operation.
|
$ 1,295.77
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37255-0094 Quiet Flush 24V toilet conversion kit upgrades compatible manual toilets to an electric flushing system with low-noise operation, a single-button flush actuator with dual-function water level control, and a PAR-Max 4 self-priming flush pump that can supply sea, lake, or river water for bowl rinsing. Designed for 24V DC systems, it combines a high-capacity waste macerator and bowl discharge pump with 19 mm inlet and 25 mm discharge connections, includes an adaptor for 38 mm waste plumbing, and is supplied as a complete kit with motorized base assembly, bowl gasket, fasteners, hoses, control switch, and port adaptor.
|
$ 1,295.77
-
+
| ||
|
1-2 weeks delivery time The Jabsco 3791-0000 water pump seal packing kit is a replacement sealing component designed to prevent leaks, maintain pump pressure, and support efficient pump operation in marine and recreational systems. Built from durable, corrosion-resistant sealing materials, it is suitable for both saltwater and freshwater use and is intended for compatibility with a variety of Jabsco water pump models, with quick installation and low-maintenance service life.
|
$ 26.28
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38045-3092 Quiet Flush E2 compact electric toilet delivers quiet 12V DC operation for space-limited marine installations, using a solenoid valve to connect to an existing pressurized fresh water system. A soft-closing plastic seat and lid, easy-clean porcelain bowl, and powerful macerator/centrifugal discharge pumping support hygienic, comfortable use, while the included control panel provides three operating settings and efficient water consumption of 1 litre per complete rinse.
|
$ 929.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38045-3094 Quiet Flush E2 compact electric toilet unit delivers a durable, low-noise freshwater flush solution for marine environments, using a touch sensor control panel with Eco Flush, Full Flush, and Empty Pump modes. It works with any pressurized water system providing a minimum 11 liters per minute flow rate and uses 1–2 liters of water per flush, while the macerator discharge pump and solenoid valve with double check valve support effective evacuation and help protect against potable water contamination. A rotating base enables flexible discharge direction (left, right, or rear), and included fittings simplify installation.
|
$ 1,025.86
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38045-4192 Quiet Flush E2 electric toilet is a regular-bowl, 12-volt DC marine sanitation unit built for quiet, comfortable onboard use with fresh water flushing. It includes a solenoid valve for connection to an existing pressurized water system, a powerful macerator discharge pump for efficient waste evacuation, and a three-setting control panel for flush and water level control. With a porcelain bowl that is easy to clean, 19 mm inlet and 25 mm discharge connections, and the ability to be mounted up to 1 meter below the waterline, it supports straightforward installation while keeping water use low at 1 litre per complete rinse (also stated as approximately 1–2 litres per flush).
|
$ 929.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38045-4194 Quiet Flush E2 electric toilet is a regular-bowl, 24V marine sanitation unit built for quiet, comfortable operation with fresh water flushing via a solenoid valve. It integrates with pressurized water systems (minimum 11 liters per minute or 3 gpm) and combines a macerator discharge pump, three-way control panel, and soft-closing seat for efficient, user-friendly waste management in onboard installations.
|
$ 929.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38072-0092 Kit B - QFE2 Pump Assembly Kit (12V) includes all the necessary parts to replace the pump assembly in a 12V Jabsco Quiet Flush E2 system. This kit ensures smooth operation and optimal toilet flushing performance.
|
$ 378.13
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38245-3092 Quiet Flush E2 compact electric toilet delivers an efficient 12V marine sanitation solution with quiet operation, a rotating base for flexible installation, and a touch sensor panel offering Eco Flush, Full Flush, and Empty Pump modes. It uses a self-priming PAR-MAX 3 flush water pump with 19 mm hose connections for seawater flushing, while a centrifugal discharge pump macerates and evacuates waste through a 25 mm outlet. With low water consumption (approximately 1–2 liters per flush, and 1 liter per complete rinse), a hygienic vitreous china bowl, and included hoses and fittings, it supports straightforward installation and service access via a quick-release system.
|
$ 929.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38245-3094 Quiet Flush E2 compact electric marine toilet delivers high-performance, low-noise flushing with a sleek touch sensor panel offering Eco Flush, Full Flush, and Empty Pump modes while using approximately 1–2 liters of water per flush. It includes a self-priming PAR-MAX 3 flush water pump with 19 mm (3/4 in) hose connections, a rotating base for left, right, or rear discharge installation, and a quick-release system for tool-free access to the macerator/discharge area. Built around a hygienic white vitreous china bowl with a soft-closing seat and cover, it supports seawater flushing and can be mounted up to 1 meter below the waterline, with 24 V DC operation listed and a maximum amperage of 10 A (13 A fuse).
|
$ 1,025.86
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38245-4192 Quiet Flush E2 electric toilet assembly delivers low-noise 12V DC flushing with a three-way control panel, using just 1 liter of water per complete rinse for efficient onboard operation. Built for raw-water flushing, it includes a remote-mounted intake pump (with strainer) plus a macerator discharge pump for dependable waste evacuation, and it can be installed up to 1 meter below the waterline. A hygienic porcelain bowl, sleek easy-clean design, and soft-closing seat and lid enhance comfort and simplify maintenance, while compatibility with previous Jabsco Quiet Flush and Standard Marine toilets supports straightforward replacement installations.
|
$ 929.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38245-4194 Quiet Flush E2 electric toilet unit delivers low-noise, water-efficient flushing for marine or RV installations with 24V DC operation. A rotating base supports flexible discharge routing to the left, right, or rear, while the quick-release system allows tool-free access for maintenance. The self-priming PAR-MAX 3 flush water pump is seawater compatible with 19 mm connections, and a centrifugal discharge pump with a 25 mm connection helps evacuate waste efficiently. A soft-close seat, white vitreous china bowl, and touch sensor control panel with Eco Flush, Full Flush, and Empty Pump settings enhance comfort and day-to-day usability.
|
$ 1,094.34
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38503-1000 base assembly kit is a Jabsco spare part supplied as Base Assembly (Kit C), intended as a replacement base assembly for service and maintenance needs where this specific kit is required.
|
$ 115.46
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38505-1000 straight discharge port kit is a genuine Jabsco spare part identified as Kit D. It is supplied as a straight discharge port component for service and replacement use where this specific kit is required.
|
$ 29.85
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38506-1000 discharge port kit is a 90 degree discharge port kit (Kit E) supplied as a Jabsco spare part, supporting service and replacement of a discharge port connection.
|
$ 29.85
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38508-1000 base cover is a branded replacement component intended to serve as a base cover in its original assembly.
|
$ 34.44
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38572-0094 pump assembly kit is a 24V spare-part unit supplied as Kit B. It is listed as an alternative to part number 38072-0094, supporting straightforward replacement when referenced in original data sheets or spare parts overviews.
|
$ 378.13
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38580-1000 control panel and control box unit is a Jabsco spare part intended for control panel and control box replacement needs, supplied under the Jabsco brand for service and maintenance use.
|
$ 241.06
-
+
| ||
|
1-2 weeks delivery time The Jabsco 38595-1000 service kit (Kit A) is a branded maintenance kit from Jabsco for service and support needs where this kit is specified.
|
$ 52.13
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.