The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 35760-0092 continuous duty ventilation blower delivers high-volume airflow of 7.1 m³/min (250 CFM) on 12V DC power for demanding commercial marine use. Its reinforced duroplastic housing uses corrosion-resistant materials, while the approximately 5,000-hour motor life supports long service intervals. A 100 mm (4 in) duct connection and flange-mount outlet allow direct bulkhead mounting, and ignition-protection compliance to ISO 8846 MARINE and USCG 183.410 helps support safer engine-compartment ventilation.
|
$ 540.80
-
+
| ||
|
1-2 weeks delivery time The Jabsco 35760-0094 continuous-duty ventilation blower delivers 7.1 m³/min (250 CFM) airflow from a 24V DC supply for reliable air intake or extraction in marine spaces. Built with a durable, corrosion-resistant reinforced duroplastic housing and a flange mount for direct bulkhead installation, it supports 100 mm (4 in) ducting connections and is designed for approximately 5,000 operating hours. Ignition protection compliance to ISO 8846 MARINE and USCG 183.410 makes it well-suited for ventilating bilges, engine compartments, galleys, and decks on gasoline-powered boats, as well as demanding engine-room installations.
|
$ 540.80
-
+
| ||
|
1-2 weeks delivery time The Jabsco 35770-0092 heavy-duty ventilation blower delivers 7.1 m³/min (250 CFM) airflow at open flow from a 12V DC continuous-duty motor engineered for roughly 5,000 hours of operation. Its flex mounting system allows 360º outlet adjustment for easier routing in tight spaces, while corrosion-resistant materials and a reinforced duroplastic housing support long-term use in marine engine spaces and bilges. Designed for 100 mm (4") duct connections, it draws approximately 11A with a recommended 15A fuse and meets ISO 8846 MARINE and USCG 183.410 ignition protection standards for safer ventilation of bilges, engine compartments, galleys, and decks.
|
$ 491.61
-
+
| ||
|
1-2 weeks delivery time The Jabsco 35770-0094 ventilation blower delivers heavy-duty, continuous-duty airflow for demanding marine spaces, running on 24V DC and providing 7.1 m³/min (250 CFM) at open flow. Its flex mount design allows 360º outlet direction adjustment and supports 100 mm (4 in) ducting for versatile installation. Corrosion-resistant materials, a reinforced duroplastic housing, and a motor rated for approximately 5,000 operating hours help ensure long service life, while ignition protection compliance to ISO 8846 MARINE and USCG 183.410 supports use in bilges and engine compartments.
|
$ 491.61
-
+
| ||
|
1-2 weeks delivery time The Jabsco 35890-0000 bilge strainer assembly combines brass and plastic construction for durable service and supports high-capacity bilge pumps with a large surface area that promotes unrestricted suction. It uses a perforated brass cylinder filter with a removable nylon filter element for effective filtration and easier maintenance, and it includes a mounting bracket to simplify installation. Overall dimensions are 13-3/4 in length and 1-3/4 in diameter, with a 3/4 in size designation.
|
$ 32.92
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36138-0000 fine mesh filter screen is a replacement filtration component designed specifically for Jabsco 36400 series strainers, capturing debris and contaminants to protect water systems and help prevent clogging. Built from corrosion-resistant materials and made for marine, RV, and general water applications, it supports smooth water flow, extends equipment life, and installs easily with no special tools required.
|
$ 23.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36139-0000 replacement screen is a 20 mesh coarse filter element made specifically for 36200 series Pumpgard strainers, delivering effective filtration performance to help protect pumps in marine environments. Designed as a direct replacement screen, it supports reliable strainer operation and consistent pump protection.
|
$ 25.77
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36403-0000 sealing O-ring is designed to create a secure seal in Jabsco 36400 and 36200 series pump guard strainers, helping maintain optimal pump performance and prevent leaks in marine filtration systems. Built for durability in harsh marine environments, it supports efficient strainer operation and dependable long-term service. Order number: 00320372.
|
$ 2.79
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36740-0000 flex-mount blower delivers high-volume ventilation from a 12V DC motor, providing 4.2 m³/min (150 CFM) airflow for efficient air intake or extraction. Built with corrosion-resistant materials and a quiet-running design, it supports 75 mm (3 in) ducting and suits spaces such as engine rooms, bilges, fuel compartments, galleys, decks, and head compartments. Flexible mounting allows 360° outlet adjustment, while ignition protection compliance (ISO 8846 MARINE and USCG 183.410) supports fume removal use before starting gasoline-powered boats.
|
$ 324.85
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36740-0000EU Flexmount blower delivers high airflow of 4.2 cubic meters per minute through 75 mm (3 inch) ducting for effective marine ventilation. Its 12 V DC operation with a maximum current of 6.8 A and a 10 A fuse supports dependable performance, while corrosion-resistant construction and quiet running suit harsh onboard environments. With bulkhead mounting via the outlet flange and a packaged weight of approximately 2.82 kg, it is well-suited for engine rooms, fuel compartments, galleys, and heads.
|
$ 376.04
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36740-0010 flex-mount ventilation blower delivers 24V airflow output of 4.2 m³/min (150 CFM) through 75 mm (3 in) ducting, combining quiet Delrin rotors with a corrosion-resistant reinforced plastic housing for dependable marine ventilation. Ignition-protected compliance to ISO 8846 MARINE and USCG 183.410 supports safe fume removal use, while the 360° adjustable flexible mounting helps optimize outlet direction and duct routing in confined spaces. Low current draw (approx. 3.3 A) with a 5 A fuse recommendation rounds out a practical, marine-ready blower package.
|
$ 295.33
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36740-0010EU Flexmount ventilation blower delivers high-performance airflow of 4.2 cu.m/min for 75mm (3") ducting, providing efficient air circulation in demanding onboard spaces. Its 24V DC operation with a maximum current of 3.3 amps and a specified 5-amp fuse supports dependable electrical integration, while the corrosion-resistant, quiet-running design enhances comfort and durability. With a bulkhead-mount flange and compact overall dimensions of 200mm long, 230mm high, and 220mm wide, it is well suited for engine rooms, fuel compartments, galleys, and heads.
|
$ 376.04
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36950-2000 fresh water pressure pump unit is a self-priming diaphragm design for reliable water distribution in marine and RV systems. It delivers 3.0 U.S. GPM (11.3 L/min) flow and supports extended dry-running capability, while a built-in discharge check valve, hydraulic pulsation dampener, and vibration-absorbing pads help reduce water hammer and operating noise. Built with corrosion-resistant components and rated for continuous-duty service, it meets USCG Regulation 183.410 and ISO 8846 MARINE ignition-protection requirements and connects to 1/2 in or 5/8 in ID hoses for flexible installation.
|
$ 741.97
-
+
| ||
|
1-2 weeks delivery time The Jabsco 36950-2200 Par pressure water system delivers dependable onboard water pressure using a 12 Volt DC motor-driven diaphragm pump with a 20 PSI pressure switch. The pressure switch turns on at 10 PSI and turns off at 20 PSI, helping maintain consistent flow for multi-outlet systems, including operation for up to four outlets simultaneously. Self-priming capability, quiet operation, vibration pads, and a dry-running diaphragm design make it a service-proven choice for pleasure boats and other marine water systems.
|
$ 647.32
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37003-1000 base screw cover kit provides a secure, polished finish for marine toilet installations by protecting the base screws for a cleaner look and improved longevity. Designed for Jabsco toilet models 37010, 37045, 37055, 37245, and 37255, this easy-to-install set includes 3 screw covers to help maintain a professional appearance in onboard restroom spaces.
|
$ 22.26
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37004-1000 toilet base assembly is a complete replacement base kit for selected Jabsco marine toilets, supplying a stable, sloped-base foundation for reliable sanitation system installation. It includes the base, joker valve, base O-ring, and discharge port, and is built from corrosion-resistant thermoplastic to withstand harsh marine environments. Compatible with multiple Jabsco toilet series, it supports straightforward replacement in compact spaces, with a note that the supplied discharge port does not fit models 37075 or 37275 (use 37077-1000 instead).
|
$ 212.49
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37006-0000 centrifugal impeller replacement supports efficient, continued operation of marine sanitation toilet pumps by restoring reliable performance in compatible Jabsco toilet pump series. Built as a durable replacement part for the Jabsco 37010 pump and related models, it is identified as part No. 16 in the exploded view for 37010, 37X45, and 37X55 pumps, and as part No. 13 for 37X75 pumps.
|
$ 51.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37010-0090 compact-bowl 12V electric toilet delivers quiet, efficient sanitation for marine and RV installations where space and power use matter. A 12V DC motor supports off-grid operation with low power consumption, while corrosion-resistant components help withstand harsh environments. Electrical protection is supported with a 25-amp fuse and a maximum current draw of 16 amps, and the self-draining design and simple flush mechanism help keep maintenance straightforward. This model is not available anymore and is listed as an alternate to Jabsco 37010-3092.
|
$ 684.29
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37010-0092 electric conversion kit upgrades a manual marine toilet to a motorized system using a high-capacity macerator and bowl scavenger pump. It supports 12V operation with a 16A draw (25A fuse) and includes hose adapters plus a momentary push button switch for straightforward installation. Designed to fit Manual Jabsco Toilet models 29090 and 29120 and most toilets using a 95.3 mm (3-3/4 in) bolt circle with a 4-hole base pattern, it provides approximately 0.9 to 1.4 liters per 5 seconds of operation and adapts to common marine hose sizes.
|
$ 637.42
-
+
| ||
|
1-2 weeks delivery time The Jabsco 37010-0096 compact-bowl electric toilet delivers reliable 24V DC flushing for marine vessels and recreational vehicles, combining a space-saving bowl design with smooth, quiet operation and low power consumption. Corrosion-resistant construction supports use in demanding marine conditions and is suitable for fresh or saltwater applications, while the 8-amp maximum current draw and 15-amp fuse size help balance efficiency with electrical protection. Packaged dimensions are 54.00 x 54.00 x 50.00 cm, with an actual weight of 14.00 kg and an approximate packed/shipping weight of 15.00 kg; this model is noted as no longer available, with Jabsco 37010-3094 listed as an alternate.
|
$ 684.29
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.