Harnessing Innovation: Veratron VDO's Marine Camera and Connector Solutions
Veratron VDO's reputation for excellence extends to their comprehensive lineup of marine cameras, connectors, and adapters, providing boat owners with versatile solutions for their navigation and monitoring needs. Whether you're looking to increase safety with a backup camera or upgrade your vessel's instrumentation with VDO's precision-engineered bezels and microprocessor-controlled sensors, Veratron VDO offers cutting-edge technology and reliable performance for yachts and boats of all types.Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The VDO 230-113-001-004C pressure monitoring switch provides a dependable low-pressure warning signal for VDO engine monitoring systems, closing the contact as pressure falls below 0.40 bar. Built for demanding vehicle environments, it supports oil, fuel, and air pressure circuits across a 0–12 bar working range, with a rugged round, unvented contact chamber and an M10 x 1 conical short thread for secure installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910000144900 passive DAB windscreen antenna is a rigid fiberglass antenna designed for in-vehicle windscreen mounting and reliable digital radio reception. With a 52.5 cm antenna length and a 250 cm cable for flexible routing, it supports DAB reception and is suited to multimedia and radio installation work where a clean, glass-mounted solution is preferred. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910000177600 fuel supply module for Mercedes-Benz integrates fuel delivery and fuel level monitoring to support stable, efficient petrol-engine operation. Built to maintain 4.1 bar fuel pressure and provide precise tank-level readings, it helps optimize drivability, fuel economy, and emissions performance on Mercedes-Benz Viano W639, Vito W639, and Sprinter 906 applications, with a plug-and-play OEM-style connector design for straightforward replacement within the vehicle’s fuel supply system. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO SingleViu programming adapter cable (part number 2910000401700) provides a dependable 8-pin Molex to Sub-D 9-pin female connection for programming and configuring Continental VDO SingleViu devices. Built for workshop efficiency, it supports use with a USB CAN interface (such as Peak PCAN-USB IPEH-002021) to create a stable communication path for setup tasks, helping technicians streamline device commissioning and service work. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002233800 tubular fluid level sensor is a 54 mm stainless steel 316 reed-switch level sender designed for accurate, real-time monitoring with a 200 mm tube length and a 90-1 Ohm empty-to-full signal. Built for VDO level measurement installations using a 5-hole SAE 54 mm mounting flange, it provides durable, maintenance-friendly operation for tanks carrying fuel or water, supporting dependable instrumentation and system monitoring across a wide range of vehicle and equipment applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002234300 tubular liquid level sender is a 54 mm stainless-steel sensor designed for reliable fuel or fluid level measurement using a tubular reed-switch, contactless reading principle. Built with a 450 mm tube length and an empty-to-full resistance signal of 90–1 Ohm, it integrates into level measurement systems via a 5-hole SAE 54 mm mounting flange and provides stable analog output across a wide 6–48 V DC operating range. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002234400 tubular fuel level sensor is a 54 mm stainless steel (SS316) contactless level sender designed for dependable tank monitoring in automotive, marine, and industrial systems. With a 500 mm probe length and a 90-1 Ohm empty-to-full signal (91-1 Ohm nominal), it provides stable analog feedback for gauges and monitoring electronics, using an insulated return signal and operating on 6–48 V DC. A 5-hole SAE 54 mm mounting flange supports secure installation, and the sensor is suitable for fuel and water service across common liquids including diesel, gasoline, petroleum, and oil. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002234500 tubular contactless liquid level sensor uses reed switch technology to deliver stable analog level readings for tank monitoring in vehicles and industrial machinery. Built as a 54 mm 5-hole SAE flange sender with a 550 mm tube, it outputs an empty-to-full resistance signal of 90 to 1 Ohm and is suitable for liquids such as diesel, gasoline, oil, petroleum, and water, supporting dependable fuel and fluid level measurement in demanding environments. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002234800 tubular contactless level sensor is a Ø54 mm stainless-steel sender designed for accurate fuel and water tank level measurement in 700–800 mm deep tanks. Using an analog 90–1 Ohm output (empty to full) and an insulated-return signal, it integrates smoothly with analog monitoring systems across automotive, marine, and industrial installations. Its SS316 tube and PA66 GF30 flange construction, wide -40 °C to +85 °C operating range, and universal 5-hole SAE mounting help deliver dependable readings in harsh environments when monitoring diesel, gasoline, oil, petroleum, or water. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002234900 tubular liquid level sender is a 54 mm SAE-flange sensor designed for VDO level measurement systems, using reed-switch, contactless operation to deliver stable analog level feedback. Built in SS316 with a 750 mm tube length and a 90-1 Ohm empty-to-full signal, it suits demanding marine and industrial tanks where reliable fuel and water level monitoring is required, with a 5-hole SAE mounting pattern for secure installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 2910002235000 tubular contactless level sensor is a stainless steel 316 sender for accurate fuel or water tank level measurement in VDO level monitoring systems, using a 90-1 Ohm analog output (empty to full). Designed for tank depths from 800 mm to 900 mm with an 800 mm tube length, it mounts via a secure 54 mm SAE 5-hole flange and operates from 6 to 48 V DC, making it a robust choice for automotive, marine, and industrial tanks handling diesel, gasoline, oil, petroleum, or water. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO Cockpit Vision fuel level gauge 301-010-002K is a 52 mm, 12V analog instrument built for dependable fuel level monitoring in automotive and marine dashboards. Designed to work with VDO lever arm senders using a 3–180 Ohm signal, it provides clear 0–1/2–1/1 indication on a black dial with selectable backlighting (white, green, red) and a red illuminated pointer. With IP64 front protection plus reverse polarity and short-circuit protection, it’s a rugged, easy-to-fit gauge for harsh operating environments. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 301-010-007K Cockpit Vision fuel level instrument is a 52 mm, 12V dashboard gauge built for clear, dependable tank monitoring in level-measurement systems. Calibrated for a 90–0.5 Ohm sender signal and a 0–1/2–1/1 display scale, it helps you track fuel status at a glance, while the black dial design and stud-bolt mounting make it a clean, secure fit in cockpit or vehicle dash panels. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO Cockpit International 301-030-001C fuel level gauge is a 52 mm black analog instrument for accurate tank level monitoring on 12V systems, scaled for empty, half, and full indications. Built for the VDO level measurement system, it is designed to work with a 3–180 Ohm EU lever arm sender and provides stable, easy-to-read feedback at the dashboard or helm for confident day-to-day operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 301-030-002G fuel level gauge from the Cockpit International series is a 52 mm, 12V dashboard instrument built to display accurate tank level information using a 90–0.5 Ohm sender signal. Designed for clean integration in vehicle instrumentation, it helps drivers and technicians track fuel level at a glance while maintaining stable performance across typical automotive electrical system voltage variation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO Cockpit International fuel level gauge 301-040-002C is a rugged 52 mm panel instrument built for accurate tank level monitoring in 24 V systems, using a VDO dip pipe sender signal of 90–0.5 Ohm. Designed for clear, quick readability, it combines a black dial with a red backlit pointer, 90° needle sweep, and multi-color 24 V floodlight illumination (white, green, red). With IP64 front protection and a -30°C to +85°C operating range, it suits demanding automotive and industrial installations where dependable fuel indication matters. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO 301-040-002G fuel level gauge from the Cockpit International series provides clear, stable fuel level indication on 24V vehicle dashboards using an analog 90-0.5 Ohm sender signal. Built for a 52 mm panel opening and designed in a clean black style, it helps drivers monitor fuel accurately from empty to full, with durable protection ratings and reliable electrical connections for everyday commercial and automotive use. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The VDO Cockpit International engine oil temperature gauge 310-030-003G provides clear, reliable oil-temperature monitoring from +50°C to +150°C for automotive, marine, and industrial engine instrumentation panels. Designed for VDO NTC thermistor input signals (322.8–18.6 Ohm), it combines a black dial with red pointer and multi-color floodlight illumination (white, green, or red) for excellent readability, while the IP64-rated front helps protect the instrument face against dust and water in demanding operating environments. |
Our managers will contact you and clarify the terms of the order
|
What are the primary functions of VDO gauges in a marine setting?
In a marine setting, VDO gauges serve as crucial instruments for monitoring and controlling various aspects of the vessel's performance. VDO marine gauges, including temperature gauges, tachometers, and voltmeters, provide real-time data on engine conditions, electrical systems, and temperature levels. Additionally, VDO rudder indicators aid in precise navigation and steering, ensuring safe and efficient boat operation. These VDO marine instruments play a vital role in enhancing both the safety and efficiency of marine vessels.
VDO gauges not only provide essential data for vessel performance but also offer a seamless integration into the cockpit marine environment. With a wide range of VDO instruments available, including pressure gauges and tachometers, boat owners can create a customized instrumentation cluster tailored to their specific needs. The VDO marine products, renowned for their reliability and functionality, have been the first choice for boat owners and manufacturers alike since 1958, demonstrating a commitment to producing high-quality instruments that meet the demands of modern pleasure boats, yachts, and sailing vessels.
VDO marine instruments, such as the VDO Tachometers, deliver real-time, accurate engine RPM readings, ensuring the engine operates within optimal performance ranges.
How does a VDO rudder indicator assist in boat maneuverability?
A VDO rudder indicator is a crucial instrument that aids in boat maneuverability by providing precise information about the position of the rudder. It offers real-time feedback to the boat operator, allowing them to make accurate steering adjustments for better control and navigation. This enhances the safety and ease of maneuvering the vessel, especially in tight spaces or challenging maritime conditions.
In addition to its primary function, a VDO rudder indicator can be seamlessly integrated into the vessel's dashboard with available installation kits and mounting options, ensuring easy setup and compatibility with various boat configurations. With its analog dial and solid housing, the VDO rudder indicator reflects the latest technology and Swiss craftsmanship, meeting the high-level standards expected by boat owners and manufacturers worldwide. It's part of VDO's extensive catalog of marine instruments designed to enhance the viewing experience and provide the best possible control and navigation capabilities for marine vehicles.
In what marine applications are VDO temperature gauges commonly used?
VDO temperature gauges find common use in various marine applications, including monitoring engine temperature, coolant systems, and other critical components of boats and yachts. These gauges are integral to ensuring the safe and efficient operation of marine engines, allowing users to keep a close eye on temperature levels and prevent overheating or potential damage. VDO's reputation for precision and reliability makes their temperature gauges a preferred choice among marine enthusiasts and professionals alike.
Beyond their traditional marine applications, VDO temperature gauges have evolved to meet the demands of modern vessels, with options for digital interfaces and compatibility with electronic networks like J1939. VDO's commitment to innovation and quality ensures that their temperature gauges maintain a high level of accuracy and reliability, meeting the diverse needs of customers in the marine market.