Harnessing Innovation: Veratron VDO's Marine Camera and Connector Solutions
Veratron VDO's reputation for excellence extends to their comprehensive lineup of marine cameras, connectors, and adapters, providing boat owners with versatile solutions for their navigation and monitoring needs. Whether you're looking to increase safety with a backup camera or upgrade your vessel's instrumentation with VDO's precision-engineered bezels and microprocessor-controlled sensors, Veratron VDO offers cutting-edge technology and reliable performance for yachts and boats of all types.Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The VDO N05-801-432 Veratron 54 mm fuel sensor mounting kit is a complete fitting set that secures compatible VDO fuel level senders to a 54 mm SAE 5-hole flange opening for dependable, consistent fuel monitoring in marine and automotive installations. Supplied as a retail pack with a seal and screws, it supports a tight, stable sensor installation that helps maintain accurate fuel level readings over time, and it is intended for lever arm sender systems such as ALAS1. |
$ 19.08
-
+
|
|
1-2 weeks delivery time The VDO N05-801-434 ALAS1 tank flange is a 54 mm bolt-mount interface designed to secure a fuel level sender to the tank with a precise, stable fit. Supplied as a complete kit with a seal and screws, it supports reliable level-measurement performance in fuel systems using an SAE 5-hole 54 mm mounting pattern, making it a practical upgrade or replacement for lever arm sender installations. |
$ 13.86
-
+
|
|
1-2 weeks delivery time The VDO N05-801-448 mast head unit rotor is a new-series windvane spare part designed for mast head units manufactured after 08-1993. Integrated into the VDO Navigation wind sensor system, this rotor supports precise wind measurement by restoring smooth, reliable operation at the mast head, helping maintain accurate instrument readings and dependable system performance. |
$ 64.05
-
+
|
|
1-2 weeks delivery time The VDO N05-801-562 Ocean Line instrument bezel is a black 85 mm trim ring designed to frame and secure a VDO gauge in the dashboard or console. Built for 85 mm Ocean Line applications, it helps deliver a clean, integrated look while supporting a precise, stable fit around the instrument for a professional-grade installation. |
$ 41.56
-
+
|
|
1-2 weeks delivery time The VDO N05-801-564 T5 wedge-base lamp holder is a dependable illumination component for OceanLine 85 mm dial lighting, designed to hold a T5 W2x4.6d bulb securely for stable, even backlighting. Built with printed circuit board contacts and a plastic body, it supports quick, secure installation and consistent instrument illumination across marine and general lighting applications. |
$ 15.65
-
+
|
|
1-2 weeks delivery time The VDO OceanLink round bezel (N05-801-788) is a 52 mm white trim ring designed to finish and protect compatible marine gauges for a clean, uniform dashboard appearance. Built to integrate seamlessly with the OceanLink series, it enhances instrument-cluster presentation while providing durable, practical bezel coverage suited to marine environments. |
$ 39.77
-
+
|
|
1-2 weeks delivery time The VDO N05-801-832 instrument front lens with push button is a marine gauge face component for the VDO Marine OceanLine 85 mm pushbutton series, designed to protect the instrument and maintain clear readability in demanding onboard conditions. With a plastic double anti-fog lens design and an 85 mm installation dimension, it restores the clean look and day-to-day usability of OceanLine instrumentation while adding convenient push-button control at the gauge. |
$ 72.69
-
+
|
|
1-2 weeks delivery time The VDO N05-801-834 front lens set (inner and outer) refreshes and protects 85 mm OceanLine instruments with clear, anti-fog visibility for dependable gauge readability. Designed for the VDO Marine OceanLine series, this durable plastic double anti-fog lens helps shield the instrument face from environmental exposure while maintaining a clean, OEM-style appearance in the dashboard. |
$ 72.69
-
+
|
|
|
1-2 weeks delivery time The VDO N05-801-970 masthead wind sensor unit for the Old Series instrument system provides smooth, dependable measurement of both wind direction and wind speed at the top of the rig. Its ball-bearing design supports low-friction vane and cup movement for accurate readings in changing conditions, helping sailors and navigators make confident trim and course decisions using trusted VDO marine instrumentation. |
$ 169.35
-
+
|
|
1-2 weeks delivery time The VDO N06-009-59001 instrument glass replacement restores clear visibility and front-face protection for VDO Standard Ø70/73 mm instruments used on Volvo Penta marine applications. Built for a precise fit, this replacement lens helps keep the dial and pointer protected while maintaining the clean, readable display you rely on for confident monitoring underway. |
$ 93.40
-
+
|
|
1-2 weeks delivery time The VDO X10-224-000-007 waste water tank mounting flange is a 64 mm weld flange kit designed to securely mount VDO waste water level senders to a tank opening. Supplied with a seal and packed as a VDO parts retail package, it supports clean, reliable installation for level measurement setups using VDO sender types such as N02-240-902 Capacitive and N02-240-904 to N02-240-906. |
$ 38.70
-
+
|
|
1-2 weeks delivery time The VDO X10-224-009-016 heavy-duty tubular sender is a robust instrumentation sender designed for Ø80 mm installations and a 716 mm length, delivering accurate real-time measurement data for demanding heavy-duty machinery and vehicle monitoring systems. Built to handle challenging operating environments, it supports dependable tracking of critical operating parameters to help maintain performance and uptime. |
$ 872.80
-
+
|
|
1-2 weeks delivery time The VDO X10-224-014-044 heavy-duty tubular sender is a rugged in-tank measuring component built for reliable, real-time monitoring in demanding commercial applications. With an Ø80 mm format and a 1250 mm length, it is designed to suit a wide range of fuel tank installations, supporting dependable instrumentation readings for critical vehicle operating data. |
$ 1,407.16
-
+
|
|
1-2 weeks delivery time The VDO X10-232-001-001 thermal switch is a precision on-off temperature control device for engine and industrial monitoring circuits, designed to close its contact as temperature rises for dependable overheat protection. It switches ON at 64°C ± 3°C and OFF at 60°C ± 3°C, uses an M14 x 1.5 threaded connection for secure installation, and supports 6–24 V DC systems with a dual-pole insulated return contact and up to 120 W switching capacity for robust control of warning, fan, or safety loads. |
$ 99.35
-
+
|
|
1-2 weeks delivery time The VDO X10-232-001-003 temperature switch is a durable thermal control device for engine monitoring in automotive and industrial systems, using an 86°C switching point to trigger cooling or warning circuits before overheating becomes critical. It closes the contact when temperature rises above 86°C ± 3°C and opens again at 81°C ± 3°C, with a dual-pole insulated return for stable signaling, 6–24 V DC operating range, and an M18 x 1.5 threaded connection for secure installation. |
$ 95.31
-
+
|
|
1-2 weeks delivery time The VDO X10-232-001-004 engine temperature switch is a calibrated 92°C on-temperature control component for vehicle engine temperature monitoring and regulation. Designed with an M18 x 1.5 male thread for secure installation, it uses a 2-pole insulated return signal and a contact that closes as temperature rises, making it ideal for controlling fans, warning circuits, or other temperature-dependent loads on 6–24 V DC systems up to 100 W maximum. |
$ 99.35
-
+
|
|
1-2 weeks delivery time The VDO X10-232-001-005 temperature switching sensor provides dependable on-off control at a 96°C switchpoint (with 2-pole insulated return) for temperature-managed systems in automotive, marine, and industrial installations. Designed for cooling-system control, overtemperature alarms, and other thermal limit functions, it supports 6–24 V DC operation, offers up to 100 W switching capacity, and installs securely via an M18 x 1.5 threaded connection with robust AMP male terminals for stable wiring in vibration-prone environments. |
$ 85.62
-
+
|
|
1-2 weeks delivery time The VDO X10-232-001-006 temperature switching device provides dependable on-off control for coolant or system temperature monitoring, with switching temperatures of 96°C and 91°C and a contact that closes when temperature rises above 96°C. Built for VDO engine monitoring use, it supports automotive, industrial, and marine installations with a secure 1/2-14 NPTF male thread, dual-pole insulated return signal, and 6–24 V DC operation for stable performance in demanding environments. |
$ 91.16
-
+
|
What are the primary functions of VDO gauges in a marine setting?
In a marine setting, VDO gauges serve as crucial instruments for monitoring and controlling various aspects of the vessel's performance. VDO marine gauges, including temperature gauges, tachometers, and voltmeters, provide real-time data on engine conditions, electrical systems, and temperature levels. Additionally, VDO rudder indicators aid in precise navigation and steering, ensuring safe and efficient boat operation. These VDO marine instruments play a vital role in enhancing both the safety and efficiency of marine vessels.
VDO gauges not only provide essential data for vessel performance but also offer a seamless integration into the cockpit marine environment. With a wide range of VDO instruments available, including pressure gauges and tachometers, boat owners can create a customized instrumentation cluster tailored to their specific needs. The VDO marine products, renowned for their reliability and functionality, have been the first choice for boat owners and manufacturers alike since 1958, demonstrating a commitment to producing high-quality instruments that meet the demands of modern pleasure boats, yachts, and sailing vessels.
VDO marine instruments, such as the VDO Tachometers, deliver real-time, accurate engine RPM readings, ensuring the engine operates within optimal performance ranges.
How does a VDO rudder indicator assist in boat maneuverability?
A VDO rudder indicator is a crucial instrument that aids in boat maneuverability by providing precise information about the position of the rudder. It offers real-time feedback to the boat operator, allowing them to make accurate steering adjustments for better control and navigation. This enhances the safety and ease of maneuvering the vessel, especially in tight spaces or challenging maritime conditions.
In addition to its primary function, a VDO rudder indicator can be seamlessly integrated into the vessel's dashboard with available installation kits and mounting options, ensuring easy setup and compatibility with various boat configurations. With its analog dial and solid housing, the VDO rudder indicator reflects the latest technology and Swiss craftsmanship, meeting the high-level standards expected by boat owners and manufacturers worldwide. It's part of VDO's extensive catalog of marine instruments designed to enhance the viewing experience and provide the best possible control and navigation capabilities for marine vehicles.
In what marine applications are VDO temperature gauges commonly used?
VDO temperature gauges find common use in various marine applications, including monitoring engine temperature, coolant systems, and other critical components of boats and yachts. These gauges are integral to ensuring the safe and efficient operation of marine engines, allowing users to keep a close eye on temperature levels and prevent overheating or potential damage. VDO's reputation for precision and reliability makes their temperature gauges a preferred choice among marine enthusiasts and professionals alike.
Beyond their traditional marine applications, VDO temperature gauges have evolved to meet the demands of modern vessels, with options for digital interfaces and compatibility with electronic networks like J1939. VDO's commitment to innovation and quality ensures that their temperature gauges maintain a high level of accuracy and reliability, meeting the diverse needs of customers in the marine market.