Harnessing Innovation: Veratron VDO's Marine Camera and Connector Solutions
Veratron VDO's reputation for excellence extends to their comprehensive lineup of marine cameras, connectors, and adapters, providing boat owners with versatile solutions for their navigation and monitoring needs. Whether you're looking to increase safety with a backup camera or upgrade your vessel's instrumentation with VDO's precision-engineered bezels and microprocessor-controlled sensors, Veratron VDO offers cutting-edge technology and reliable performance for yachts and boats of all types.Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The VDO 230-112-003-015C pressure switch is a compact monitoring device for engine and system pressure control, switching at 0.50 bar ± 0.10 bar and operating across 0 to 12 bar. Built with an M10 x 1 conical short thread (11 mm thread length) and a 27 mm hex housing, it supports oil, fuel, and air pressure circuits and provides a single-pole common-ground signal that closes as pressure falls, making it a dependable choice for VDO engine monitoring installations. |
$ 139.89
-
+
|
|
1-2 weeks delivery time The VDO 230-112-005-001C oil pressure switch is a 1.00 bar monitoring device for engine and system protection in automotive and industrial applications. Designed for VDO engine monitoring setups, it uses an M10 x 1 tapered short thread for secure installation and provides a switching signal that closes as pressure falls, helping trigger warning circuits reliably across 6–24 V DC systems. |
$ 183.94
-
+
|
|
1-2 weeks delivery time The VDO 230-112-005-003C pressure switch is a robust monitoring device for engine and system pressure control, switching at 1.80 bar (±0.20 bar) with a contact that closes as pressure falls. Built for industrial and automotive use, it features an M10 x 1 male tapered short thread for secure installation, a 2-pole insulated return signal, and operation on 6–24 V DC with up to 5 W non-inductive switching capacity for dependable warning and protection circuits. |
$ 228.95
-
+
|
|
1-2 weeks delivery time The VDO 230-112-005-004C pressure switching sensor is a 3.00 bar unit for vehicle engine monitoring that helps protect critical systems by triggering a warning/logic signal when pressure drops. Built with an M10 x 1 male tapered short thread and a 2-pole insulated return design, it closes the contact as pressure falls below the switchpoint, supporting dependable control and indication in oil, fuel, or air pressure circuits across 6–24 V DC installations. |
$ 257.29
-
+
|
|
1-2 weeks delivery time The VDO 230-112-005-005C pressure switch is a durable 0.80 bar switchpoint device for hydraulic and engine monitoring systems, designed to trigger a warning or control circuit as pressure falls. With an M10 x 1 male tapered short thread for secure installation and a 2-pole insulated return design, it provides dependable pressure supervision for media such as oil, fuel, and air across 6–24 V DC electrical systems. |
$ 179.52
-
+
|
|
1-2 weeks delivery time The VDO 230-112-005-006C pressure monitoring switch is a compact 0.50 bar unit built for dependable control and warning functions in engine monitoring and other automotive or industrial pressure circuits. Using an M10 x 1 tapered short male thread for secure installation, it closes the contact as pressure falls, helping protect critical systems that operate with oil, fuel, or air. |
$ 179.71
-
+
|
|
1-2 weeks delivery time The VDO 230-112-005-011C engine-monitoring pressure switch is a precision 1.50 bar unit designed to trigger a warning signal when pressure drops below the switchpoint, supporting dependable protection of oil, fuel, or air systems. Built for demanding automotive and industrial use, it combines an M10 x 1 male tapered thread for straightforward installation with a dual-pole insulated return, slow contact response, and stable operation across –25 °C to +120 °C, while handling 0–12 bar operating pressure and up to 30 bar briefly. |
$ 228.95
-
+
|
|
1-2 weeks delivery time The VDO 230-213-001-011C pressure switch is a 12.00 bar switching device for pressure monitoring and control in automotive, industrial, and VDO engine monitoring applications. With a 1/8-27 NPTF male thread and a common-ground, single-pole switching signal (contact closes as pressure falls), it supports dependable warning and protection logic for systems using oil, fuel, or air as the pressure medium. |
$ 186.64
-
+
|
|
1-2 weeks delivery time The VDO 230-213-002-001C pressure monitoring switch is a 7 bar control device with a Bosch connection designed to protect pressure-sensitive systems by switching when pressure drops. Built with a 1/8-27 NPTF thread for secure installation, it closes the contact when pressure falls and supports dependable control in fuel, oil, coolant, and hydraulic circuits across automotive, industrial, and marine applications, with rugged IP67 sealing and a 2-pole insulated return design for safe operation. |
$ 209.43
-
+
|
|
1-2 weeks delivery time The VDO 230-213-002-003C pressure switch is a robust 10.50 bar monitoring component for control and engine monitoring systems, using a 1/8-27 NPTF male thread for secure installation. With a dual-pole insulated return and a switching function where the contact closes as pressure falls below 10.50 bar, it helps deliver dependable pressure warning and control logic in automotive and industrial applications while supporting 6–24 V DC electrical systems. |
$ 232.13
-
+
|
|
1-2 weeks delivery time The VDO 230-213-002-004C pressure switch is a robust engine-monitoring switch for oil, fuel, and air systems, providing a 4.50 Bar switchpoint (±0.30 Bar) to trigger a warning circuit when pressure drops. Built for demanding installations, it supports 6–24 V DC electrical systems, uses an M10 x 1 conical tapered thread for secure mounting, and operates reliably across –25 °C to +120 °C with a sealed, unvented round contact chamber. |
$ 280.91
-
+
|
|
1-2 weeks delivery time The VDO 232-011-005-003D 90°C temperature switch is a precision thermal switching device for automotive engine monitoring and temperature control systems, designed to close its contact as temperature rises beyond the set point. With an M10 x 1.5 threaded body for secure installation and a single-pole common-ground signal, it helps control temperature-dependent functions and supports stable engine operating conditions across a wide 6–24 V DC electrical environment. |
$ 247.39
-
+
|
|
1-2 weeks delivery time The VDO 232-011-005-017D temperature switching unit is calibrated to actuate at 150°C, helping control and protect engine thermal operation in automotive use. Built with an M10 thread for a secure installation, it supports dependable temperature-based switching for applications such as cars and trucks where consistent heat management contributes to durability and reliable performance. |
$ 243.44
-
+
|
|
1-2 weeks delivery time The VDO 232-011-005-027D thermal switch is a single-pole, common-ground temperature monitoring device that closes its contact as temperature rises past 150°C (± 5°C), supporting dependable overtemperature warning and control strategies. Designed for automotive, marine, and industrial engine temperature monitoring circuits, it uses an M10 x 1.5 male thread for straightforward installation, operates on 6–24 V DC, and features a slow response characteristic for stable switching in demanding environments. |
$ 285
-
+
|
|
1-2 weeks delivery time The VDO 232-011-005-028D temperature switch is a precision thermal control device for automotive temperature monitoring circuits, designed to close its contact as temperature rises above 170°C (± 5°C). Built with an M10 x 1.5 male thread and a single-pole common-ground switching signal, it supports reliable overtemperature warning or control strategies in 6–24 V DC systems while maintaining a secure, service-friendly installation. |
$ 208.86
-
+
|
|
1-2 weeks delivery time The VDO 232-011-017-016D thermal switch is a 95°C switching device (±3°C) for temperature-controlled circuits, closing its contact as temperature rises above 95°C for dependable fan, warning, or control activation. Built for 6–24 V DC systems, it uses a 1-pole common ground signal with a slow contact response and supports 1.2–3 W maximum switching capacity for non-inductive loads. An M14 x 1.5 threaded body (29 mm length, 10 mm sensor diameter) and AMP Male 6.3 x 0.8 mm connector make it a practical fit for compact installations requiring stable over-temperature switching up to 150°C. |
$ 92.86
-
+
|
|
1-2 weeks delivery time The VDO 232-011-017-017D temperature switch is a precision threshold sensor for engine monitoring and temperature control, closing its contact at 85°C ± 3°C to trigger alarms, relays, or control circuits. Designed for VDO engine monitoring systems across automotive, marine, and industrial use, it combines an M14 x 1.5 thread for secure installation with a single-pole common-ground signal, slow response behavior, and 6–24 V DC operation for dependable performance in demanding environments. |
$ 97.11
-
+
|
|
1-2 weeks delivery time The VDO 232-011-017-032D temperature switch is a 1-pole, common-ground thermal switch for vehicle cooling-system temperature control, closing its contact when temperature rises above 120°C (±3°C). Built with an M14 x 1.5 male thread for straightforward installation, it supports 6–24 V DC operation and provides a dependable switching signal for warning lamps, fans, or control circuits to help prevent overheating. |
$ 87.28
-
+
|
What are the primary functions of VDO gauges in a marine setting?
In a marine setting, VDO gauges serve as crucial instruments for monitoring and controlling various aspects of the vessel's performance. VDO marine gauges, including temperature gauges, tachometers, and voltmeters, provide real-time data on engine conditions, electrical systems, and temperature levels. Additionally, VDO rudder indicators aid in precise navigation and steering, ensuring safe and efficient boat operation. These VDO marine instruments play a vital role in enhancing both the safety and efficiency of marine vessels.
VDO gauges not only provide essential data for vessel performance but also offer a seamless integration into the cockpit marine environment. With a wide range of VDO instruments available, including pressure gauges and tachometers, boat owners can create a customized instrumentation cluster tailored to their specific needs. The VDO marine products, renowned for their reliability and functionality, have been the first choice for boat owners and manufacturers alike since 1958, demonstrating a commitment to producing high-quality instruments that meet the demands of modern pleasure boats, yachts, and sailing vessels.
VDO marine instruments, such as the VDO Tachometers, deliver real-time, accurate engine RPM readings, ensuring the engine operates within optimal performance ranges.
How does a VDO rudder indicator assist in boat maneuverability?
A VDO rudder indicator is a crucial instrument that aids in boat maneuverability by providing precise information about the position of the rudder. It offers real-time feedback to the boat operator, allowing them to make accurate steering adjustments for better control and navigation. This enhances the safety and ease of maneuvering the vessel, especially in tight spaces or challenging maritime conditions.
In addition to its primary function, a VDO rudder indicator can be seamlessly integrated into the vessel's dashboard with available installation kits and mounting options, ensuring easy setup and compatibility with various boat configurations. With its analog dial and solid housing, the VDO rudder indicator reflects the latest technology and Swiss craftsmanship, meeting the high-level standards expected by boat owners and manufacturers worldwide. It's part of VDO's extensive catalog of marine instruments designed to enhance the viewing experience and provide the best possible control and navigation capabilities for marine vehicles.
In what marine applications are VDO temperature gauges commonly used?
VDO temperature gauges find common use in various marine applications, including monitoring engine temperature, coolant systems, and other critical components of boats and yachts. These gauges are integral to ensuring the safe and efficient operation of marine engines, allowing users to keep a close eye on temperature levels and prevent overheating or potential damage. VDO's reputation for precision and reliability makes their temperature gauges a preferred choice among marine enthusiasts and professionals alike.
Beyond their traditional marine applications, VDO temperature gauges have evolved to meet the demands of modern vessels, with options for digital interfaces and compatibility with electronic networks like J1939. VDO's commitment to innovation and quality ensures that their temperature gauges maintain a high level of accuracy and reliability, meeting the diverse needs of customers in the marine market.