The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 60088-1000 base with gasket is a high-quality replacement part that provides a secure, reliable mounting base for compatible remote controlled marine searchlights. Built for durability in marine conditions and designed for easy installation with a secure fit, it helps maintain overall searchlight performance. Compatible with 255 SL remote controlled searchlights and specified 146SL and 255SL 12 Volt and 24 Volt searchlight variants; shipping weight is 0.50 kg.
|
$ 182.08
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6056-0003-P nitrile impeller is an 8-blade water pump component built for efficient circulation in marine, RV, and industrial applications. A brass insert and Ding Drive shaft hub (6-drive type) support a secure fit in compatible Jabsco pumps, while the 2-9/16 in (65 mm) diameter, 2 in (51 mm) depth, and 5/8 in (16 mm) shaft size help restore reliable pump performance with straightforward replacement and low maintenance.
|
$ 267.44
-
+
| ||
|
1-2 weeks delivery time The Jabsco 62040-4002 remote-control marine searchlight delivers powerful 12V illumination with a stated 230,000 candlepower output and slow/fast (dual-speed) control for precise beam positioning. Built in heavy chrome-plated brass for durability and a classic chrome finish, it includes joystick control and is described with broad aiming capability, including 370° horizontal with 60° vertical rotation as well as a 450° horizontal and 70° vertical sweep in the provided data. Designed for remote mounting and helm operation, it supports marine navigation and safety tasks such as locating buoys, moorings, and channel markers.
|
$ 2,043.90
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6303-0001-P impeller service kit is a neoprene replacement set that supports reliable pump operation with a single-flat drive and a 6-blade impeller design. With an 8 mm shaft diameter and compact 51 x 22 mm sizing, it is supplied as a service kit including gaskets and impeller lubricant to help maintain efficient water circulation and secure sealing.
|
$ 49.51
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6303-0001B neoprene impeller is a durable replacement component for marine and industrial pump systems, built with a reinforced plastic insert to support long service life in demanding conditions. Its 6-blade, H-profile design helps deliver smooth, consistent water flow, while the 8 mm shaft diameter and single flat drive ensure a secure fit and efficient power transfer for engine cooling and fluid transfer duties.
|
$ 59.75
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6303-0003-P impeller service kit supports reliable water circulation in water pumps, bilge systems, and electric toilets by combining a durable nitrile 6-blade impeller with included gaskets and an impeller lubrication packet. With 51 x 22 mm dimensions and an 8 mm single-flat shaft fit, it is built for straightforward replacement and broad marine-system compatibility, including Jabsco Water Puppy applications and 37010-series electric toilets.
|
$ 44.85
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6303-0003B nitrile impeller is a durable flexible-impeller replacement designed for demanding marine service and reliable pump performance. Built from nitrile with a single flat drive hub and a 6-blade design, it supports efficient operation in applications including Jabsco bilge pumps, Water Puppy equipment, and 29X00 and 37010 series toilets and macerator pumps. Dimensions provided include a diameter of 50.8 mm (2 in) / 51 mm, depth or width of 22.3 mm (7/8 in) / 22 mm, and a shaft diameter of 7.9 mm (5/16 in) / 8 mm.
|
$ 59.75
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6303-0007-P impeller service kit is a green urethane/polyurethane replacement kit for Jabsco wakeboard and ski boat ballast pumps, built around a 6-blade impeller with a single flat D-drive shaft interface for strong water transfer. Supplied with an O-ring and a glycerin lubricating packet, it supports reliable, leak-reduced pump servicing and is listed as a replacement for multiple Jabsco impeller references.
|
$ 93.65
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6342-0000 slinger kit is a 3-piece replacement set designed to support reliable, durable macerator waste pump operation. Supplied as three slingers per pack, it is compatible with multiple Jabsco toilet series (37010, 37055, 37255, 37045, 37245, 37075, 37275) and the Macerator Pump model 18590, making it well-suited for maintenance and upgrades using genuine Jabsco parts.
|
$ 27.68
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6400-0004 flexible impeller engine cooling pump delivers a nominal flow rate of 235 litres/min (62 gallons/min) at 1750 rpm and is built for dependable marine and general-purpose pumping. Its bronze construction, Neoprene impeller, and carbon/ceramic mechanical seal support durable operation, while 1-1/4 inch NPT internal ports simplify plumbing integration. The pump self-primes at low or high speeds, can be mounted in any position, and pumps in either direction with equal efficiency for flexible installation and service.
|
$ 1,896.01
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6400-0051 flexible impeller engine cooling pump end combines positive-displacement self-priming with centrifugal-style transfer capability for efficient pumping at low or high speeds and in either direction. Built with a bronze body, Neoprene impeller, and carbon/ceramic mechanical seal, it features 1-1/4 inch NPT internal ports and delivers a nominal 235 litres/min (62 gallons/min) at 1750 rpm. Designed to self-prime with airtight suction lines, it can achieve up to 22 ft vertical dry suction lift when fully wetted, while specified temperature and pressure limits help protect the impeller and pump components in demanding marine service.
|
$ 2,183.15
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6400-1051 flexible-impeller engine cooling pump delivers durable bronze construction with a neoprene impeller for water and general-purpose pumping, providing a nominal flow rate of 235 litres/min (62 gallons/min) at 1750 rpm. It primes at low or high speeds and supports vertical dry suction lift up to 22 feet (6.7 m) when wetted, with 1-1/4 inch NPT internal ports and a carbon/ceramic mechanical seal for reliable service. Designed as a short-shaft pump end for Caterpillar engines, it can be mounted at any angle and pump in either direction, while requiring liquid lubrication (do not run dry for more than 30 seconds) and observing operating limits of 45°F to 180°F (7°C to 82°C) and 30 psi maximum continuous pressure.
|
$ 2,208.62
-
+
| ||
|
1-2 weeks delivery time The Jabsco 64042-1007 searchlight extension cable adds 15 ft (4.5 m) of reach to help position a Jabsco searchlight exactly where it is needed. Built for marine and outdoor use, it delivers a secure, reliable connection that supports precise positioning and improved illumination in low light conditions.
|
$ 148.90
-
+
| ||
|
1-2 weeks delivery time The Jabsco 64046-0007 RC searchlight xenon bulb kit delivers powerful illumination for marine lighting needs, supporting 12/24V operation and producing an impressive 600,000 CP output. Built around a 6-inch RC searchlight bulb setup and also referenced as 63042-0012/24, it is aimed at users who want exceptional brightness with reliable performance.
|
$ 1,484.09
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6407-0010 mechanical shaft seal is built to deliver a reliable, secure seal in demanding marine and industrial environments. Precision engineering and high-quality materials support durable, efficient sealing performance across a variety of industrial applications, helping maintain long service life and consistent operation.
|
$ 153
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6408-0000 mechanical seal set is a precision-crafted spare part designed for specific applications to support proper equipment functioning and long service life. Built to Jabsco quality standards, it delivers durable, reliable sealing performance and is listed as an alternative to Cummins 13651900 and MAN 51.06599-6088 and 51.06599.6088.
|
$ 157.78
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6496 sealing gasket is a durable replacement component for Jabsco marine pumps, designed to provide a tight seal that helps prevent leaks and supports optimal pump performance. Its precise fit supports long-lasting reliability in marine applications, and it is often used with the Jabsco 3993 cover or the Jabsco 11831-0000 cover, with an alternate reference to Jabsco 6496-0000.
|
$ 14.39
-
+
| ||
|
1-2 weeks delivery time The Jabsco 653-0001-P impeller service kit supplies a neoprene pin-drive impeller with a gasket set for smooth, long-lasting pump performance. Built with a 12 mm shaft diameter, bolt-type shaft fit, and 6-blade design, it matches 51 mm diameter and 22 mm depth requirements for efficient fluid transfer in marine and industrial applications. This kit is also supplied with impeller lubricant and is listed as a replacement for Johnson 09-810B and Vetus IMP00801, with barcode 671880574921 and order number 00320259 for easy identification.
|
$ 53.50
-
+
| ||
|
1-2 weeks delivery time The Jabsco 653-0001B neoprene impeller is a durable marine circulation component built for reliable water flow, using a 6-blade design with 51 x 22 mm dimensions and a 12 mm bolt-type shaft. It supports consistent performance in demanding marine conditions and is listed as compatible with Johnson model 09-810B and Vetus model IMP00801.
|
$ 53.47
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6590-0005 rubber impeller pump delivers reliable, consistent pumping for marine, industrial, and general fluid transfer applications. Its durable 1 1/4-inch rubber impeller is built for resilient performance, while the efficient design supports dependable fluid handling where reliability and long service life matter.
|
$ 4,286.68
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.