The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 6718-21 single flat shaft component is a precision-engineered spare part built to support reliable, efficient performance across marine, industrial, and other applications. Its single flat design is intended to meet specific system requirements while reflecting Jabsco’s focus on durability and quality engineering.
|
$ 694.62
-
+
| ||
|
1-2 weeks delivery time The Jabsco 67262-0000 sealed beam lighting unit delivers reliable 12V illumination for marine use and is designed to fit 7-inch spot and searchlight applications. Built with a sealed beam design for durability, it is specified as compatible with the Jabsco 62040-4002 7-inch 12 volt searchlight, providing a dependable replacement light source for demanding environments.
|
$ 255.91
-
+
| ||
|
1-2 weeks delivery time The Jabsco 673-0001-P impeller and gasket service kit supports efficient marine water pump performance with a neoprene, six-blade impeller measuring 51 x 22 mm and a 12.7 mm shaft size. Supplied as a service kit with gaskets and impeller lubricant, it is intended as a direct replacement option across multiple Johnson and Volvo applications and is referenced as an alternative to several OEM part numbers.
|
$ 55.43
-
+
| ||
|
1-2 weeks delivery time The Jabsco 673-0001B neoprene impeller is built to support efficient water circulation in marine engine applications, helping keep the engine running smoothly in demanding marine conditions. Its neoprene construction is described as durable and resistant to wear and tear, delivering long-lasting reliability backed by Jabsco quality.
|
$ 71.32
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6760-0001B neoprene impeller is a 9-blade replacement component built for marine water circulation systems, specified for the 270 MP SPL pump. It features 95 x 88.9 mm dimensions, a 25.4 mm shaft diameter with spline drive, and is listed as compatible with the JOHNSON 09-802B model to help maintain efficient, reliable pump operation.
|
$ 356.03
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6760-0003B nitrile impeller delivers reliable and efficient water circulation to support stable marine engine temperature. Built from nitrile with a brass insert and spline drive hub, it is suited for applications where pumped media may contain oil and is intended for use on the 270 MP NIOSPL model. With a 95 mm diameter, 88.9 mm depth, 25.4 mm shaft diameter, and 9-blade design, it provides a dependable replacement component for demanding marine operation.
|
$ 430.34
-
+
| ||
|
1-2 weeks delivery time The Jabsco 6988-0000 cam component is a precision-engineered brass spare part built for reliable, long-lasting performance in marine and industrial systems. Its high-quality construction supports optimal functionality, and it is listed as an alternate to Jabsco 6988 and Jabsco 6988-3000. Shipping weight is 0.80 kg.
|
$ 110.93
-
+
| ||
|
1-2 weeks delivery time The Jabsco 706-0010 pump end cover gasket is a durable sealing component designed to prevent leaks and maintain pressure integrity in pump systems. Built from high-quality materials for long-lasting performance, it helps reduce replacement frequency and downtime while supporting efficient operation in marine, industrial, or recreational applications.
|
$ 22
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7273-0001-P neoprene impeller kit is a durable spare-part set built to support smooth and efficient marine engine operation by extending water pump system life. Its neoprene construction is designed to withstand harsh marine conditions while offering resistance to abrasion and corrosion for reliable performance on the water.
|
$ 74.12
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7273-0001B neoprene impeller is a 6-blade replacement component built for dependable pump operation in marine and industrial applications. With a 51 x 22 mm size, an 8 mm shaft fit, and a single flat drive (profile G), it supports smooth, efficient flow and is specified as a replacement for Jabsco 7273-0201, 7273-0001-P, and as a replacement for Oberdorfer impeller 6617.
|
$ 61.37
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7273-0002B impeller is an EPDM pump spare part designed for medium-pressure duty and operation from approximately 4°C to 120°C. With a 51 mm diameter, 22 mm depth, 8 mm shaft diameter, and a single flat drive hub, it provides a precise fit for compatible pump setups, while the food-approved EPDM material and plastic insert support dependable use where material compatibility is verified against the pumped liquid.
|
$ 136.98
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7273-0003-P impeller kit is a flexible nitrile replacement impeller solution with a 6-blade design and single flat shaft drive, built to keep compatible Jabsco Water Puppy pumps operating reliably. With 51 x 22 mm dimensions and stated shaft diameter information in the supplied data, it supports straightforward replacement of earlier impeller references (Jabsco 6303-0003 and 7273-0003) and is listed for use with multiple Jabsco pump part numbers.
|
$ 61.42
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7273-0003B nitrile impeller is a 6-blade, profile G replacement component built for Maxi Puppy 3000 pumps and designed to support reliable water flow in marine applications. With a single flat drive and 51 x 22 mm dimensions, it is produced under rigorous quality standards for durable, long-lasting operation and is listed as a compatible alternative to Jabsco 7273-0203 and 7273-0003-P.
|
$ 61.37
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7420-0004 flexible impeller pedestal mount pump delivers a nominal 62 GPM (235 litres/min) at 1750 rpm for demanding marine duties such as engine cooling and general-purpose liquid transfer. Its bronze construction with a neoprene impeller, full thickness cam, and carbon/ceramic mechanical seal supports dependable operation, while 1-1/4 inch NPT internal vertical ports simplify integration. Self-priming performance, bi-directional pumping capability, and operation at low or high speeds make it a versatile onboard solution when installed with airtight suction lines and run with liquid for lubrication.
|
$ 2,268.76
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7420-0101 bronze flexible-impeller engine cooling pump delivers dependable cooling-water flow with 1-1/4 inch NPT internal ports, a Neoprene impeller, and a carbon/ceramic mechanical seal. It provides a nominal 235 liters per minute (62 gallons per minute) at 1750 RPM, primes at both low and high speeds, and supports suction lift up to 22 feet when wetted (10 feet dry lift with a minimum of 800 RPM). Built for marine use and capable of handling thin or viscous liquids, it must not be run dry (over 30 seconds) and is not suitable for pumping gasoline or other flammable liquids.
|
$ 2,603.41
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7614-0002B impeller is a food grade EPDM replacement component built for efficient fluid movement with 12 blades and a stable double flat drive hub. With a 57 mm diameter, 32 mm depth, and 16 mm shaft diameter, it suits Jabsco 28 series hygienic impeller pumps and supports operation from approximately 4°C to 120°C with FDA and 3A certifications.
|
$ 247.18
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7614-0005B food-quality impeller is a high-performance replacement component for food and beverage pumping, built to support safe, hygienic fluid transfer. It is described as FDA and 3A certified and suited for cold and hot liquids with an approximate temperature range of 4°C to 120°C. The construction is presented as wear- and abrasion-resistant for reliable pump efficiency in continuous processing, transfer, and production environments, including applications such as juices and syrups.
|
$ 150.49
-
+
| ||
|
1-2 weeks delivery time The Jabsco 777-0001 flexible impeller pedestal pump end delivers efficient, leak-resistant fluid transfer using a neoprene impeller with a lip-type seal. Built with a bronze pump body and marine-quality bronze and stainless steel construction, it supports general-purpose water pumping through 1 inch NPT internal ports, with a nominal flow rate of 23 GPM (87 LPM) at 1750 RPM. Self-priming capability up to 10 feet (3 m) from dry and up to 22 feet (6.7 m) when wetted helps simplify installation, while bi-directional pumping and the ability to handle solids in suspension enhance versatility for marine, industrial, and recreational use.
|
$ 1,445.18
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7876 brass cam component with BG040 dowel pin is built for precision and reliable operation, using durable brass construction to support smooth performance and long service life. It is listed as an alternate to Jabsco 7876-0000 and ships with a specified weight of 0.15 kg.
|
$ 112.36
-
+
| ||
|
1-2 weeks delivery time The Jabsco 7876-0000 plastic cam component with dowel pin BG040 is a durable spare part built for marine use, supporting smooth operation in demanding on-water conditions. With a robust plastic design and a listed shipping weight of 0.15 kg, it is suited to both recreational and professional marine applications and is noted as an alternate to Jabsco 7876.
|
$ 98.02
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.