The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 50840-0012 Cyclone low-pressure centrifugal pump delivers efficient 12V DC water transfer and circulation for marine, RV, and off-grid systems. Built with a heavy-duty stainless steel motor and pump unit, it provides high flow up to 29.7 gallons per minute (110 liters/min) with pressure up to 0.6 bar (8.7 psi), while supporting quiet operation. An anti-clogging impeller, long-life mechanical seal, and 90° rotatable head enhance reliability, simplify installation, and help reduce maintenance for clean or lightly contaminated water handling.
|
$ 570.29
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50840-0024 low-pressure cyclone centrifugal pump delivers gentle, high-flow liquid transfer for marine and industrial duties with a 24V DC motor and 3/4 in NPT threaded ports. Its continuously rated design provides flows up to 110 L/min (29 GPM) at low pressures, supported by a robust stainless steel body for demanding environments. Built for flooded-suction installations (non-self-priming), it handles fluid temperatures from +4°C to +95°C and is suited to applications such as ballast transfer, hot water circulation, engine cooling, and central heating systems.
|
$ 661.50
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50840-2012 Cyclone centrifugal pump delivers high-flow, low-pressure transfer for tasks such as hot water circulation (including engine cooling and central heating) and ballast transfer using a 12V DC motor. Its stainless steel body supports durable, corrosion-resistant service, while the non-self-priming design requires a continuously flooded suction for reliable operation. With 3/4 inch BSP internal threaded ports, a stated yield of 100 L/min (with flows up to 110 L/min), and a maximum total head of 4 meters, it is built for continuous-rated circulation and transfer duties.
|
$ 508.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50840-2024 Cyclone centrifugal pump unit delivers continuous-duty fluid transfer from a 24V DC motor with a robust stainless steel body for marine and industrial environments. It uses 3/4 inch BSP internal threaded ports for straightforward plumbing and is specified as non-self-priming, requiring flooded suction for operation. Depending on stated conditions, flow is listed up to 120 L/min (31 GPM), up to 110 L/min (29 GPM), and 100 L/min (22 GPM) at 0.1 m head, with a maximum recommended head of 4 m and an operating temperature range of +4°C to +95°C. With an approximate 3500-hour motor life and compact dimensions of 163 x 120 x 122 mm, it suits applications including hot water circulation, ballast transfer, engine cooling, central heating systems, and bait tank/livewell circulation.
|
$ 508.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50850-2012 low-pressure cyclone pump is a 12V stainless steel unit built for versatile, reliable pumping across marine, industrial, and other applications. Its stainless steel construction helps resist corrosion and supports long-lasting service, while the cyclone pump design is intended to handle low-pressure duties efficiently for consistent, dependable performance.
|
$ 505.65
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50850-B003 Cyclone Hybrid pump delivers powerful, efficient pumping with a 24V UL voltage rating and a versatile BSP (British Standard Pipe) connection. Built with a robust design for reliable performance, it supports durable operation across both marine and industrial applications where a dependable pumping solution is required.
|
$ 674.72
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50860-0024 high-pressure cyclone centrifugal pump unit delivers high-flow, intermittent-duty fluid transfer with 24V DC power, providing 80 L/min (18 GPM) at 0.1 m head and up to 12 m (39.37 ft) maximum total head with a maximum pressure of 1.2 bar (17.4 PSI). Built with a stainless steel body for durability in harsh environments, it is non-self-priming and requires flooded suction, supports trigger and shut-off nozzles, and handles fluids from +4°C to +95°C for ballast transfer and the movement of diesel, water, and mild chemicals in marine, industrial, and agricultural use.
|
$ 784.88
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50860-2012 Cyclone centrifugal pump unit delivers high-pressure transfer and circulation performance from a 12V DC motor, providing up to 80 L/min (18 GPM) at 0.1 m head and handling pressures up to 1.2 bar (17.4 PSI). Its non-self-priming, flooded-suction design supports demanding ballast transfer, diesel and water transfer, mild chemical handling, and hot water circulation, while the stainless steel body is built for durability in harsh environments. Intermittent-duty operation (30 minutes on/30 minutes off), 3/4 inch BSP internal threaded ports, a +4°C to +95°C fluid temperature range, and defined electrical protection (21A max current, 25A fuse) make it a strong fit for short bursts of high-output service.
|
$ 683.97
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50860-2024 Cyclone centrifugal pump delivers high-pressure fluid transfer with a non-self-priming design that requires flooded suction for consistent operation. A close-coupled 24V DC motor and stainless steel construction support reliable performance in demanding marine and industrial environments, with flow up to 80 LPM (21 GPM) and pressure up to 1.2 bar (17 psi). 3/4 inch BSP ports simplify integration, while intermittent duty guidance (30 minutes on / 30 minutes off), a +4°C to +95°C fluid temperature range, and a 10.5A draw (15A fuse) help match the pump to real-world onboard and equipment transfer needs.
|
$ 683.97
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50870-2012 Cyclone centrifugal pump is a durable, high-output, non-self-priming unit built for high-pressure duty across a variety of applications. Stainless steel construction and 3/4 inch BSP internal threaded ports support robust, straightforward installation, while 12 m maximum total head capability and 80 litres per minute output at 0.1 m head deliver strong performance. With a 21 amp maximum current rating (25 amp fuse) and a compact 205 mm x 120 mm x 122 mm footprint, it fits neatly into tight spaces and is designed for intermittent operation with flooded suction; it can also be used with a shut-off nozzle.
|
$ 610.31
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50870-2024 Cyclone centrifugal pump delivers high-pressure performance for demanding applications with a robust stainless steel body and an intermittent-rated duty profile. This non-self-priming unit requires flooded suction for optimal operation and provides 80 litres per minute (18 gallons per minute) at a 0.1 m head. It features 3/4 inch BSP internal threaded ports, supports a maximum recommended total head of 12 m (minimum 5 m), and includes electrical ratings of a 13 amp fuse size and 10.5 amp maximum current.
|
$ 610.31
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50875-0000 sealing kit is built to upgrade high-pressure cyclone systems by delivering a tight, reliable seal that helps maintain optimal pressure levels during operation. Precision-engineered for durability in high-pressure environments, it supports long-lasting performance and helps keep cyclone equipment running at peak efficiency.
|
$ 87.67
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50880-1000 diaphragm shower and bilge pump delivers 12V DC self-priming drainage performance for sinks, showers, and shallow bilges, combining a single-diaphragm design with a joker valve for quiet operation and extended dry running. With flow up to 16 L/min, self-priming up to 3 m suction lift, and 19 mm hose ports, it installs flexibly via multi-positional connections and a rotatable pump head while eliminating the need for a strainer or filter for simpler maintenance.
|
$ 258.85
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50880-1100 diaphragm pump unit for shower drain and bilge use delivers up to 16 L/min flow on 24V DC power with quiet operation and a 30-minute maximum continuous run rating. Its single-diaphragm design with joker valves supports extended dry running, while self-priming up to 3 m and a maximum recommended head of 6 m help handle demanding drainage and transfer tasks. Multi-positional mounting with 19 mm (3/4 in) ports and a compact, filter-less design make installation flexible and maintenance straightforward.
|
$ 258.85
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50885-0000 joker valve is a durable replacement component for marine and wastewater applications, designed specifically for compatibility with the Jabsco 50880 series. Built for reliable performance in demanding marine environments, it helps ensure proper system functionality and is described as easy to install and replace. The shipping weight is 0.10 kg, and it is identified as parts number 14 in the exploded view.
|
$ 4.73
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50886-1000 clamp ring kit is built to support reliable performance in plumbing systems using the 508X0 Series. Designed for a precise fit, it helps enhance overall efficiency and durability, making it a practical upgrade for maintaining optimal operation. Shipping weight: 0.20 kg.
|
$ 44.16
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50890-1000 diaphragm waste pump delivers heavy-duty 12V waste handling for black and grey applications, including holding tank emptying and waste from sinks, showers, and toilets. A self-priming lift up to 3 meters, 38 mm (1 1/2 inch) hose ports, and up to 19 litres per minute output support strong solids-in-suspension performance, while multi-positional mounting and a rotatable head provide installation flexibility. Designed for tough environments, it can run dry without damage, requires no filter, includes shrouded mechanical parts for protection, and is rated for intermittent duty with up to 30 minutes continuous working time.
|
$ 272.56
-
+
| ||
|
1-2 weeks delivery time The Jabsco 50890-1100 diaphragm waste water pump is built for efficient waste evacuation from sinks, showers, and black water systems, with self-priming up to 3 meters for flexible installation. It delivers up to 19 liters per minute, supports 38 mm (1-1/2 inch) hose connections, and handles a maximum discharge head of 4 meters to move waste effectively onboard. A compact, multi-positional design with shrouded mechanical components enhances safety and mounting options, while intermittent-duty operation is rated for up to 30 minutes of continuous use and is capable of dry running without damage.
|
$ 299.94
-
+
| ||
|
1-2 weeks delivery time The Jabsco 51080-2001 bronze pump is a robust 1 inch, 80-size, foot-mounted unit built for precise and durable fluid transfer. BSP threaded ports help ensure a secure connection in installed systems, supporting reliable operation where a rugged bronze pump design is required.
|
$ 1,955.76
-
+
| ||
|
1-2 weeks delivery time The Jabsco 51200-2011 bronze foot mounted pump delivers high-output performance for demanding bilge, deck wash, and fluid transfer duties with 1½ inch BSP internal threaded ports. It reaches up to 195 liters per minute (43 gallons per minute) at 1500 rpm with a maximum head of 3 meters, and its self-priming design supports up to 3 meters of vertical lift for dependable operation in challenging setups. Built with a bronze body, stainless steel shaft, and a mechanical shaft seal, it provides strong wear and corrosion resistance, while the manual self-adjusting clutch with a 1A/1B pulley enables controlled operation. A neoprene impeller comes standard for clean or lightly contaminated water, with an optional nitrile impeller available for oily water applications.
|
$ 2,519.59
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.