ID
1331474
$ 508.87
1-2 weeks delivery time
-
+
The Jabsco 50840-2024 Cyclone centrifugal pump unit delivers continuous-duty fluid transfer from a 24V DC motor with a robust stainless steel body for marine and industrial environments. It uses 3/4 inch BSP internal threaded ports for straightforward plumbing and is specified as non-self-priming, requiring flooded suction for operation. Depending on stated conditions, flow is listed up to 120 L/min (31 GPM), up to 110 L/min (29 GPM), and 100 L/min (22 GPM) at 0.1 m head, with a maximum recommended head of 4 m and an operating temperature range of +4°C to +95°C. With an approximate 3500-hour motor life and compact dimensions of 163 x 120 x 122 mm, it suits applications including hot water circulation, ballast transfer, engine cooling, central heating systems, and bait tank/livewell circulation.
- Description
- Ask a Question
-
Jabsco 50840-2024 Cyclone 24V Centrifugal Circulation Pump Unit
The Jabsco 50840-2024 is a high-output Cyclone centrifugal pump and motor unit built for continuous operation in demanding marine and industrial duties. With a stainless steel body and 24V DC power, it is used for circulation and low-pressure transfer tasks such as hot water circulation, ballast transfer, engine cooling, and central heating systems.
Application
- Hot water circulation
- Engine cooling
- Central heating systems
- Ballast transfer systems
- Livewells
- Bait tanks
- Diesel transfer
- Gas oil transfer
- Kerosene transfer
- Paraffin transfer
- Hot and cold water system circulation
- Windscreen washing
- Marine, industrial, and automotive fluid transfer applications
This pump is non-self-priming and requires flooded suction. It should be mounted where the inlet is continually flooded, and it must be installed below the lowest fluid level to maintain flooded suction.
Technical Specifications
Brand Jabsco Supplier Code 50840-2024 Order Number 00320141 Product Portfolio Circulation Pumps Pump Type Centrifugal (Cyclone), Non-Self-Priming Duty Rating Continuously Rated Voltage 24V DC Flow Rate (As Stated) Up to 120 L/min (31 GPM); up to 110 L/min (29 GPM); 100 L/min (22 GPM) at 0.1 m head; yield listed as 100 L/min Maximum Recommended Total Head 4 m Maximum Pressure (As Stated) 8.7 psi (0.6 bar) Connections / Ports 3/4 inch BSP internal threaded ports (19 mm fittings stated) Material Stainless Steel Body Fluid Temperature Range +4°C to +95°C Current / Amperage (As Stated) Maximum current 3.5 A; amperage listed 4.5 A Fuse (As Stated) Fuse size 5 A; also listed 7 A (recommended fuse 7 A) Motor Life (As Stated) Approximately 3500 hours Suction Lift (As Stated) 2 m suction lift when wet Dimensions (L x W x H) 163 x 120 x 122 mm Weight (As Stated) 2.98 kg (shipping weight listed 3.70 kg; packed weight listed approx. 3.48 kg) Packaged Dimensions (As Stated) 24.00 cm (L) x 18.00 cm (W) x 13.00 cm (H)
Product Details
- Construction: Robust stainless steel body for durability in harsh conditions
- Installation: Can be mounted on any flat surface; if mounted vertically, ensure the motor is above the pump head
- Operating notes: May be run dry for short periods of time; may be run against a closed discharge
- Serviceability: Only one tool needed for all servicing
- Certifications (As Stated): Complies with USCG 183.410 and ISO 8846 Marine; ISO 8849 Marine
- Alternative (As Stated): Alternative to Jabsco 50830-2024
- Spare Parts (As Stated): Seal kit available, catalog 50835-0000
Features
- Non-self-priming centrifugal design requiring flooded suction
- Continuous-duty operation for circulation and transfer tasks
- Long-life DC motor and silent running (as stated)
- Anti-clogging design impeller (as stated)
- Long-life mechanical seal (as stated)
Important Operating Notice
- Do not pump gasoline, petrol, or fluids with a flash point below 37°C.
-
Popular products
-
1-2 weeks delivery time$ 508.87 -
1-2 weeks delivery time$ 508.87 -
1-2 weeks delivery time$ 661.50 -
-
1-2 weeks delivery time$ 674.72 -
-
1-2 weeks delivery time$ 683.97 -
1-2 weeks delivery time$ 683.97 -
1-2 weeks delivery time$ 610.31 -
