ID
1213479
$ 683.97
1-2 weeks delivery time
-
+
The Jabsco 50860-2012 Cyclone centrifugal pump unit delivers high-pressure transfer and circulation performance from a 12V DC motor, providing up to 80 L/min (18 GPM) at 0.1 m head and handling pressures up to 1.2 bar (17.4 PSI). Its non-self-priming, flooded-suction design supports demanding ballast transfer, diesel and water transfer, mild chemical handling, and hot water circulation, while the stainless steel body is built for durability in harsh environments. Intermittent-duty operation (30 minutes on/30 minutes off), 3/4 inch BSP internal threaded ports, a +4°C to +95°C fluid temperature range, and defined electrical protection (21A max current, 25A fuse) make it a strong fit for short bursts of high-output service.
- Description
- Ask a Question
-
Jabsco 50860-2012 Cyclone 12V High Pressure Centrifugal Pump Unit
The Jabsco 50860-2012 is a high-pressure Cyclone centrifugal pump and motor unit for fluid transfer and circulation where a flooded suction installation is available. Built with stainless steel construction and designed for intermittent, high-output use, it supports fast transfer rates and reliable operation in demanding marine, industrial, and automotive environments.
Application
- Ballast transfer systems requiring high pressure and flow
- Diesel transfer
- Water transfer
- Mild chemical transfer
- Hot water circulation
- Closed-circuit circulation systems such as livewell circulation, washdown, and central heating (flooded suction applications)
Compatibility
- Alternative model: Jabsco 50870-2012 (BSP)
- Alternative model: Jabsco 50870-0012 (NPT)
- Alternative model: Jabsco 50860-0012 (NPT)
Technical Specifications
Voltage 12V DC Pump Type Centrifugal high pressure Cyclone pump Priming Non-self-priming; requires flooded suction Flow Rate 80 liters/min (18 GPM) at 0.1 m head Maximum Pressure Up to 1.2 bar (17.4 PSI) Maximum Recommended Total Head 12 m (39.4 ft) Minimum Recommended Head 5 m (16.4 ft) Ports 3/4 inch BSP internal threaded ports Body Material Stainless steel Duty Rating Intermittent duty: 30 minutes on, 30 minutes off Maximum Current 21A Fuse Size 25A Fluid Temperature Range +4°C to +95°C Weight 4.90 kg (approximately 5.40 kg packed) Shipping Weight 5.50 kg Packaged Dimensions L: 31.00 cm, H: 14.00 cm, W: 16.00 cm Pump Dimensions Height: 12.2 cm, Width: 12.0 cm, Length: 20.5 cm Motor Type Long-life DC motor designed for high output Motor Life 2500 hours Suction Lift 2 m suction lift when wet Product Portfolio Circulation pumps Compliance Complies with USCG 183.410 and ISO 8846 Marine; ISO 8849 Marine
Product Details
- Installation requirement: Mount with the inlet continually flooded (below the lowest fluid level) because the pump is not self-priming.
- Use with accessories: Can be used with shut-off nozzles and trigger nozzles for controlled dispensing.
- Operational flexibility: Can be run dry for short periods of time and can be run against a closed discharge.
- Mounting guidance: Can be mounted on any flat surface; if mounted vertically, ensure the motor is above the pump head.
Features
- High flow output for fast transfer and circulation
- Robust stainless steel body for longevity and harsh-condition performance
- Anti-clogging impeller design
- Long-life mechanical seal
- Silent running
- Only one tool needed for all servicing
-
Popular products
-
1-2 weeks delivery time$ 683.97 -
-
1-2 weeks delivery time$ 674.72 -
1-2 weeks delivery time$ 683.97 -
1-2 weeks delivery time$ 610.31 -
-
-
-
-
