The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 23920-2213 Utility Puppy 3000 self-priming pump delivers 12V DC transfer performance with up to 50 litres per minute (11 gallons per minute) and a maximum head of 12 meters. It uses 3/4 inch BSP inlet and discharge ports, self-primes from dry up to 2.4 meters, and includes built-in dry-running protection for up to 10 minutes after the initial prime. A carbon-ceramic shaft seal and non-rusting bronze body support continuous operation and corrosion resistance, while a fully serviceable design with minimal wearing parts helps simplify maintenance; maximum current draw is 21 amps with a 25-amp fuse requirement. Note: listed as not available anymore, with Jabsco 23920-2223 shown as an alternate.
|
$ 1,000.32
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-2223 Utility Puppy 3000 impeller pump delivers high-output 12V water transfer up to 50 L/min for demanding marine and utility duties. Its self-priming design lifts up to 2.4 m and supports applications such as bilge pumping, deck wash, and general-purpose transfer, while built-in dry-run protection allows up to 10 minutes of operation after priming. A bronze body with a nitrile impeller and carbon-ceramic shaft seal enhances durability, and 3/4 inch BSP threaded ports, a 25A fuse rating, and 21A current draw support straightforward DC installation.
|
$ 1,000.02
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-2313 Utility Puppy 3000 pump is a versatile water transfer unit built for reliable performance across marine, recreational vehicle, and industrial applications. Its 24V operation and BSP (British Standard Pipe) connections support straightforward installation and compatibility with standard plumbing systems, while the listed 50 LPM capacity helps deliver efficient transfer performance. This model is marked as no longer available, with Jabsco 23920-2323 noted as an alternative.
|
$ 1,000.32
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-2323 Utility Puppy 3000 impeller pump delivers heavy-duty, continuous-duty pumping on 24V DC power with up to 50 L/min output and self-priming capability up to 2.4 m. A corrosion-resistant bronze body with a nitrile impeller and mechanical seal supports demanding marine use, while dry-running capability for up to 10 minutes after priming helps protect operation during brief loss of flow. 3/4" BSP female threaded ports, 11A current draw, and ISO/CE certifications make it a practical choice for bilge, deckwash, and general-purpose transfer tasks.
|
$ 678.50
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-2403 Utility Puppy 2000 self-priming pump unit delivers durable 12V DC pumping for marine, industrial, and general-purpose use, with a non-rusting bronze body and a simple serviceable design. It provides up to 30 liters per minute (7 GPM) with rapid self-priming up to 1.2 meters from dry, plus built-in dry-running protection for up to 10 minutes after the initial prime. With 3/4 inch BSP inlet and discharge ports, a lip-type shaft seal, and a continuously rated direct-drive permanent-magnet motor, it supports reliable bilge pumping, deck washdown, and fluid transfer in tough environments.
|
$ 608.13
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-2423 Utility Puppy 2000 flexible impeller pump delivers 12V DC self-priming transfer for tasks such as livewell circulation, bait tank draining, oil changes, and bilge work. It combines a bronze pump head with an oil-resistant nitrile impeller and a continuous-duty motor, drawing up to 13A and using a 15A fuse. With 3/4" threaded ports (listed as BSP in multiple specs) plus dry-running protection and a compact, serviceable design with few wearing parts, it supports dependable marine, RV, and industrial use while meeting ISO 8846, ISO 8849, and BS EN 60945 certifications.
|
$ 608.27
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-2523 Utility Puppy 2000 impeller pump delivers 24V DC utility pumping for marine tasks with self-priming capability and a continuous-duty motor for dependable operation. A bronze pump head and nitrile impeller support durability, while the run-dry feature helps protect the pump during short periods without flow after initial prime. With 7.5A maximum current draw, 10A fuse protection, and 3/4 inch threaded ports, it suits bilge, deck wash, bait tanks, wash downs, and general-purpose transfer applications.
|
$ 552.45
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-9223 Utility Puppy 3000 run dry pump and motor unit delivers high-flow, self-priming performance for marine, domestic, and industrial transfer duties where short periods without flow can occur. Its bronze pump body, nitrile impeller, and nitrile/carbon/ceramic mechanical seal support durability, while the close-coupled 12V DC continuous-duty motor provides dependable operation. With 3/4 inch NPT ports, 11.33 GPM (43 LPM) output at 10 ft (3 m) head, and self-priming up to 8 ft (2.4 m), it suits bilge, deck wash, bait tank, washdown, and general service applications, handling solids below approximately 6–7 mm and liquid temperatures from 50°F to 180°F (10°C to 82.2°C).
|
$ 1,019.16
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-9323 Utility Puppy 3000 pump and motor unit delivers self-priming, high-flow performance for 24V DC marine and other DC-powered systems. Its bronze pump body with a nitrile impeller and nitrile/carbon/ceramic mechanical seal supports durable operation for bilge, deck wash, and general-purpose transfer, with 11.33 GPM (43 LPM) output at 10 ft (3 m) total head and self-priming up to 8 ft (2.4 m) vertical lift. 3/4 inch NPT ports and a continuous-duty motor help ensure dependable service, including short-duration dry running capability as specified for the Utility Puppy 3000.
|
$ 1,121.08
-
+
| ||
|
1-2 weeks delivery time The Jabsco 23920-9523 Run Dry Utility Puppy 2000 pump and motor unit delivers dependable transfer performance from a 24V DC supply with 3/4 inch NPT ports for straightforward installation. Its bronze construction with a nitrile impeller and nitrile lip seal supports continuous-duty operation, rated at 8.33 GPM (32 LPM) at 10 ft (3 m) total head, and self-priming up to 4 ft (1.2 m) of vertical lift. Built for demanding marine service such as bilge and deck wash use, it is designed to tolerate debris and short-duration dry running while maintaining reliable pumping in real-world conditions.
|
$ 681.52
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2431-0000 brass cam kit is a durable upgrade and replacement component for Jabsco 777 Series pumps, built from high-quality brass for long-lasting service. Designed to handle high pressure and heavy usage, it supports efficient pump operation with precision fitment for seamless integration in marine and industrial applications.
|
$ 263.73
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2441 cam plate component supports liquid flow in Jabsco flexible impeller cooling pumps by deforming the impeller blades to generate pumping action. It is a wear item that should be inspected regularly and replaced as needed to maintain pump performance. Compatibility includes Jabsco pump models 11000, 22770-1051, 2620-254, 2620-255, 29400-1051, 29400-1151, 29440-1051, 29460-1251, 29470-2351, 29470-2351C, 29480-2151, and 52020-2051.
|
$ 291.67
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2472-0010 clutch pulley component is a durable spare part designed for marine engine systems, built to support smooth operation and long service life in harsh marine environments. Precision engineering and resilient materials help enhance resistance to corrosion and wear, making it a dependable choice for replacing worn parts or upgrading a marine engine setup.
|
$ 473.81
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2473-0000 marine-grade bronze clutch component is a premium replacement 2 clutch clone designed for the 18310 6590-0005 clutch pump. Its corrosion-resistant bronze construction is engineered for harsh saltwater use, while the bolt-on installation helps minimize downtime. Rated for up to 5 bar (73 psi), -10°F to 120°F (-23°C to 49°C), and up to 2,500 RPM, it supports smooth clutch engagement and disengagement for reliable operation in demanding marine environments.
|
$ 303.62
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2551-0000 cam plate component is designed for engine cooling pumps, supporting efficient operation and long service life in demanding environments. Precision engineering and durable brass construction (1/2) help deliver reliable performance for marine and industrial applications, with a listed shipping weight of 0.30 kg.
|
$ 188.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2574-0000 brass wear plate kit is a durable replacement component for 1-1/2 in and 2 in BSP pumps, designed to help minimize wear and tear for efficient operation and reduced maintenance. With an approximate 90.5 mm outer diameter, 3.4 mm thickness, and a 45.0 mm inner hole diameter, it supports long service life and reliable pump performance, and is listed as an alternate to 2574. Shipping weight: 0.40 kg.
|
$ 55
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2575 precision dowel pin is a high-quality spare part designed to provide secure, accurate alignment in industrial machinery. Built for durability and reliability, it supports demanding applications where consistent positioning and long service life matter.
|
$ 14.39
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2620-1101 bronze cooling-water pump unit is a pulley-driven, flexible-impeller pedestal pump end designed for marine circulation and cooling duties. It uses 3/8 in NPT internal ports, a 316 stainless steel shaft with a 17 mm diameter, and supports multiple impeller material options (Viton, Neoprene, Nitrile) to suit different service needs. With stated flow performance up to 7.5 GPM (25 LPM) and self-priming capability, it delivers durable, serviceable pumping for onboard and dockside applications.
|
$ 539.65
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2763 cam plate component is a critical wear part for Jabsco flexible impeller cooling pumps, where it deforms the impeller blades to generate liquid flow. Regular inspection and timely replacement help maintain pump efficiency and support optimal performance. It is compatible with multiple Jabsco pump models, including 11620-200, 11620-211, 22820-2101, 22830-2001, 22830-2101, 22830-2201, 22830-2301, 22940-2001, 29350-1001, 29350-1101, 6640-200, and 9560.
|
$ 143.45
-
+
| ||
|
1-2 weeks delivery time The Jabsco 2763.337 Cam Bronze 010 component delivers a robust, corrosion-resistant design engineered for durability and dependable performance. Its precision-made cam bronze construction supports smooth, efficient operation, making it well-suited to a wide range of uses across industrial machinery and marine equipment.
|
$ 143.45
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.