The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 2765B wearplate kit is a precision brass component built to protect and extend the service life of Jabsco water pump systems in marine and industrial use. With strong resistance to wear and corrosion, it helps maintain smooth, reliable pump operation during continuous duty. The wearplate measures approximately 38.1 mm in diameter, 1.0 mm in thickness, with an approximately 11.1 mm inner hole diameter, and is listed as an alternate to 2765-0000; shipping weight is 0.10 kg.
|
$ 62.14
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28141-2111 stainless steel flexible impeller pump head kit is an unmotorised spare-part assembly built for durable transfer and circulation duties using 1/2 in BSP internal ports. Its 316 stainless steel construction helps resist abrasive wear, while the flexible impeller design supports non-pulsating flow, handles hard and soft solids without clogging, and manages viscosities up to 500 centiPoise for demanding industrial and commercial use.
|
$ 1,834.50
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28141-2113 spare component is a Jabsco spare part identified for ordering and replacement by its specified part number.
|
$ 1,834.50
-
+
| ||
|
1-2 weeks delivery time The Jabsco Pureflo 28200-4102 flexible impeller pedestal pump delivers hygienic, self-priming fluid transfer for demanding applications in food processing, pharmaceuticals, cosmetics, and beverage production. AISI 316 stainless steel wetted parts and a food-grade EPDM impeller support safe handling, while self-priming up to 4.5 meters and viscosity capability up to 50,000 cP provide strong process flexibility. With output up to 33 liters per minute at a 3-meter head at 1500 rpm, a maximum differential pressure of 3.5 bar, and a Clean-in-Place design with a long-life mechanical shaft seal, it helps maintain consistent performance with simplified cleaning and reduced downtime.
|
$ 2,759.07
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28200-4105 Pureflo P40 flexible impeller pedestal pump delivers hygienic, self-priming performance for demanding transfer and circulation duties, using AISI 316 stainless steel wetted parts and a neoprene impeller for durable, reliable service. It provides up to 33 litres per minute at a 3 m head and 1500 rpm, supports viscosities up to 50,000 cP, and can handle both soft and hard solids. With 1 inch RJT (BS1864) ports, self-priming up to 4.5 m, and clean-in-place or strip-to-clean maintenance options, it is well suited to food, dairy, cosmetic, pharmaceutical, and beverage applications.
|
$ 2,677.41
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28204-6000 replacement component is a spare part intended for service and maintenance needs where the correct Jabsco part number is required.
|
$ 1,852.19
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28205-0010 stainless steel end cover is a durable replacement component intended for long-lasting service as an End Cover 040. Its stainless steel construction helps deliver corrosion resistance and dependable performance, making it a practical Jabsco spare part for a range of applications where a robust end cover is required.
|
$ 309.68
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28205-0020 end cover is a Jabsco spare part designed for the P40 Sanitary Series, supporting durable, reliable service and helping maintain optimal performance and longevity in sanitation system applications.
|
$ 339.48
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28207-0000 replacement shaft is a Jabsco spare part built for the P40 and S40 Series, providing a durable and reliable solution for marine applications where dependable shaft performance is required.
|
$ 756.33
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-1205 Pureflo pump head kit delivers hygienic, flexible-impeller pumping for a wide range of process duties while fitting IEC 71 standard D80 frame motors. AISI 316 stainless steel wetted parts, a neoprene impeller, and 25 mm Tri-Clamp ports support clean handling and straightforward cleaning, with output up to 33 litres per minute at 3 m head at 1500 rpm and a maximum differential pressure of 1.7 bar. It handles viscosities up to 50,000 cP, self-primes up to 4.5 m, and uses a long-life tungsten carbide and ceramic mechanical shaft seal for demanding service in food, dairy, cosmetic, pharmaceutical, and beverage applications.
|
$ 2,797.01
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-4105 Pureflo pump head kit is a hygienic, self-priming flexible impeller unit built for demanding transfer and process duties. AISI 316 stainless steel wetted parts and a neoprene impeller support reliable operation across food, dairy, cosmetic, pharmaceutical, and beverage applications, while 1 in RJT ports and a long-life mechanical shaft seal simplify integration and upkeep. It supports clean-in-place or strip-to-clean maintenance, delivers up to 33 litres per minute at a 3 m head at 1500 rpm, and handles viscosities up to 50,000 cP with self-priming up to 4.5 m.
|
$ 2,487.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-4105C motor-driven flexible impeller pump unit is a hygienic, self-priming solution built to meet demanding cleaning and process requirements. It uses a 240V single-phase 50Hz electric motor (1420 rpm, IP55) with AISI 316 stainless steel wetted parts and a neoprene impeller for dependable service. With self-priming up to 4.5 meters, output up to 33 litres/minute at 3 m head, and 1" RJT ports, it supports transfer and processing duties across food, dairy, cosmetic, pharmaceutical, and beverage applications.
|
$ 4,035.36
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-4105E hygienic self-priming flexible impeller motor pump unit combines a 0.55 kW electric motor (400 V, 3-phase, 50 Hz, 960 rpm, IP55) with AISI 316 stainless steel wetted parts and a neoprene impeller for efficient, hygiene-focused transfer duties. It uses 1 in RJT (BS1864) connections, delivers up to 22 litres per minute at a 3 m head with a maximum differential pressure of 1.7 bar, and supports clean-in-place or easy strip-to-clean routines with a long-life mechanical shaft seal. Built for food, dairy, cosmetic, pharmaceutical, and beverage applications, it is self-priming up to 4 m and can handle soft and hard solids plus viscosities up to 700 cP.
|
$ 3,321.38
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-4105H Pureflo flexible impeller motor pump unit delivers hygienic, self-priming transfer performance for demanding process duties. It combines a robust 400 V, 3-phase, 50 Hz, 1440 rpm, IP55 electric motor with AISI 316 stainless steel wetted parts and a neoprene impeller, providing up to 33 litres per minute at a 3 m head. Designed for food, dairy, cosmetic, pharmaceutical, and beverage applications, it supports clean-in-place procedures or can be stripped for cleaning, handles soft and hard solids, and manages viscosities up to 150 cP.
|
$ 3,300.40
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-4122 pump head kit is a hygienic, self-priming flexible impeller assembly built with AISI 316 stainless steel wetted parts and a food-grade EPDM impeller for safe, reliable handling in sensitive environments. It supports up to 33 litres per minute at a 3 m head, delivers a maximum differential pressure of 1.7 bar, and self-primes up to 4.5 m. Designed to fit IEC 71 standard D80 frame motors, it features 1 in RJT (BS1864) ports, clean-in-place or strip-to-clean maintenance, and a long-life mechanical shaft seal for easy upkeep across demanding process duties.
|
$ 2,668.68
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-7105 pump head kit is a 1" P40 Pureflo hygienic flexible impeller assembly built for IEC 71 standard D80 frame motors, combining AISI 316 stainless steel wetted parts with a neoprene impeller for reliable sanitary transfer. It delivers up to 33 litres/minute (at 3 m head @ 1500 rpm), self-primes up to 4.5 m, and handles viscosities up to 50,000 cP, making it well-suited to transfer, filling and emptying, and recirculating or mixing duties across food, dairy, cosmetic, pharmaceutical, and beverage applications.
|
$ 2,487.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28220-7125 hygienic flexible impeller pump head kit is built for IEC 71 standard D80 frame motors and uses AISI 316 stainless steel wetted parts with a high-pressure neoprene impeller for reliable transfer, filling, and recirculating duties. It delivers up to 33 liters per minute, self-primes up to 4.5 meters, handles viscosities up to 50,000 cP, and supports clean-in-place or strip-to-clean maintenance with a long-life mechanical shaft seal. The kit connects via 25 mm SMS 1145 ports, measures approximately 115 mm long by 120 mm wide, and weighs 2.51 kg (approximately 3.01 kg packed).
|
$ 2,586.98
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28227-0001 shaft extension component is a durable spare part engineered to support enhanced machinery performance, delivering a precision-built solution backed by Jabsco for reliable industrial use.
|
$ 512.17
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28230-2101 flexible impeller pedestal pump is a bare-shaft pump end (no motor) built for demanding transfer, filling, and mixing duties with abrasive or viscous fluids. AISI 316 stainless steel wetted parts, a standard-pressure neoprene impeller, and a nitrile/carbon/ceramic mechanical seal support chemical-resistant operation, while 3/4 in BSP ports simplify installation. Performance information in the provided text includes output up to 33 L/min at a 3 m head at 1500 rpm, self-priming up to 4.5 m, and stated viscosity handling up to 50,000 cP, with additional catalog data noting 10.6 GPM (40 L/min) flow and viscosities up to 4,000 cP.
|
$ 2,584.09
-
+
| ||
|
1-2 weeks delivery time The Jabsco 28231-0103B mechanical seal assembly is a durable replacement sealing component for marine pumps and engines that helps prevent fluid leaks and supports efficient, reliable operation. Built for harsh marine environments with corrosion resistance against saltwater damage, it features a standard carbon/ceramic sealing pair and is specified with a 15 bar (218 psi) pressure rating and a -40°C to 150°C (-40°F to 302°F) temperature range. With a compact 30 mm outer diameter, 18 mm inner diameter, and 6 mm thickness, it is designed for straightforward installation and is noted as suitable for a wide range of Jabsco equipment, including Jabsco 28 series hygienic impeller pumps.
|
$ 223.36
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.