ID
1002968
$ 1,121.08
1-2 weeks delivery time
-
+
The Jabsco 23920-9323 Utility Puppy 3000 pump and motor unit delivers self-priming, high-flow performance for 24V DC marine and other DC-powered systems. Its bronze pump body with a nitrile impeller and nitrile/carbon/ceramic mechanical seal supports durable operation for bilge, deck wash, and general-purpose transfer, with 11.33 GPM (43 LPM) output at 10 ft (3 m) total head and self-priming up to 8 ft (2.4 m) vertical lift. 3/4 inch NPT ports and a continuous-duty motor help ensure dependable service, including short-duration dry running capability as specified for the Utility Puppy 3000.
- Description
- Ask a Question
-
Utility Puppy 3000 Jabsco 23920-9323 Self-Priming Pump Unit
The Jabsco 23920-9323 “Utility Puppy 3000” is a self-priming flexible impeller pump close-coupled to a 24V DC motor, built to handle demanding marine utility duties. Its bronze construction and mechanical seal design support long service life in applications that need reliable water circulation, fluid transfer, and general-purpose pumping.
Application
- Bilge pumping
- Deck wash
- Bait tank service
- Wash downs
- General marine service
- Marine, domestic, and industrial applications where short-duration over-running without flow is a possibility
- Aqueous industrial fluid transfer
- Recirculation of aqueous media including coolants
- Sump emptying
Technical Specifications
Model / Catalog Number 23920-9323 Pump Type Self-Priming Flexible Impeller Pump Power 24 Volt DC Rated Flow 11.33 GPM (43 LPM) Rated Total Head 10 ft (3 m) Self-Priming Lift Up to 8 ft (2.4 m) vertical lift Ports 3/4 inch NPT Recommended Hose Designed to operate with 1 inch reinforced hose Pump Body Material Bronze Impeller Material Nitrile Mechanical Seal Nitrile / Carbon / Ceramic Liquid Temperature Recommendation (With Supplied Impeller) 50°F to 180°F (10°C to 82.2°C) Solids Handling Guidance Solids size below approximately 6–7 mm Compliance USCG 183.410; ISO 8846 Marine; ISO 8849 Marine
Product Details
- Construction: Bronze pump head with a heavy-duty, continuous rated motor.
- Dry running: Stated as ten minutes dry running, and also stated as dry running for twenty minutes after initial use.
- Priming guidance: Initial priming must not last longer than 30 seconds before fluid enters the pump head to provide impeller lubrication.
- Installation: May be mounted in any position without loss of efficiency; if mounted vertically, the pump head down is suggested.
- Flow path notes: The dry running feature means the pump is not reversible; the discharge is the vertical port. Motor shaft rotation determines intake and discharge port location.
- System notes: No leaks or blockages should be in the system; inlet leaks will degrade self-priming capability.
- Strainers: Do not restrict inlet pipework; strainers are not generally recommended.
Features
- Self-priming capability for reliable starts
- Bronze-bodied flexible impeller design suited to bilge debris
- Compact design that delivers high flow rates
- Will not airlock; continues to operate even when air passes through the system
- Pumps out until the last drop of media has gone
- Simple, serviceable design with fewer wearing parts
Spare Parts
- Major Overhaul / Rebuild Kit: SK415-0113 service kit with impeller, O-ring, and seal
-
Popular products
