Barton Marine Sailing Hardware is renowned for its wide range of high-quality sailing equipment and marine deck hardware, crafted to meet the needs of sailors around the world. Established in 1948 by Ron Barton in Whitstable, UK, the company has a strong shipwright heritage and continues to pioneer innovative designs.
|
1-2 weeks delivery time The Barton N02290 is a Size 2 double stanchion lead block with two 35 mm plain bearing sheaves, designed for guiding continuous furling and control lines along the deck. Weighing 120 g, it supports ropes up to 8 mm and provides a SWL of 370 kg with a break load of 740 kg.
|
$ 59.78
-
+
| ||
|
1-2 weeks delivery time The Barton 60142 is a stanchion-mounted bullseye fairlead designed for guiding control lines and furling lines along the deck. Weighing 105 g, it provides a simple, low-friction solution for clean line routing on cruising and sailing yachts.
|
$ 44.94
-
+
| ||
|
1-2 weeks delivery time The Barton 52100 is a stanchion cleat designed for quick attachment to stanchions, pushpit, or pulpit tubes. Weighing 90 g, it features soft nylon jaws that grip securely without damaging the tube, providing a practical temporary cleating point on board.
|
$ 37.53
-
+
| ||
|
1-2 weeks delivery time The Barton 42334 is a small furling drum with a 76 mm diameter, designed for single-line jib furling systems on dinghies, dayboats, and light cruising yachts. Weighing 220 g, it supports sail areas up to 60 sq ft and delivers a SWL of 554 kg with a break load of 1108 kg.
|
$ 113.14
-
+
| ||
|
1-2 weeks delivery time The Barton 42335 is a large furling drum with a 95 mm diameter, designed for single-line jib furling systems on dinghies, catamarans, and light cruising yachts. Weighing 290 g, it supports sail areas up to 100 sq ft and delivers a SWL of 554 kg with a break load of 1108 kg.
|
$ 140.60
-
+
| ||
|
1-2 weeks delivery time The Barton 42336 is a top swivel designed for use with Barton furling drums 42334 and 42335. Weighing 62 g, it features a solid aluminium body with stainless steel ball bearings, supporting sail areas up to 100 sq ft with a SWL of 554 kg.
|
$ 121.38
-
+
| ||
|
1-2 weeks delivery time The Barton 60750 is a low-profile stainless steel mast step with a hinged design and non-slip toothed surface. Weighing 178 g, it provides a secure foothold for mast access and is designed for installation with 4 × 5 mm rivets at 500 mm spacing.
|
$ 96.77
-
+
| ||
|
1-2 weeks delivery time The Barton 02900 is a Size 2 boom vang system with a 4:1 purchase and swivel head, supplied with 6.1 m of 8 mm braided polyester line. Designed for boats up to 6.1 m (20 ft), it delivers a SWL of 370 kg and comes fully assembled for quick installation and use.
|
$ 239
-
+
| ||
|
1-2 weeks delivery time The Barton 03900 is a Size 3 boom vang system with a 4:1 purchase and snap shackle fittings, supplied with 7.3 m of 8 mm braided polyester line. Designed for boats up to 7.6 m (25 ft), it delivers a SWL of 400 kg and comes fully assembled for quick installation and use.
|
$ 446.80
-
+
| ||
|
1-2 weeks delivery time The Barton 05900 is a Size 5 4:1 boom vang system with snap shackles and 54 mm blocks, designed for boats up to 10.7 m (35 ft). With a safe working load of 750 kg and a total weight of 1800 g, this professionally assembled system provides reliable boom control, efficient load handling, and quick deployment for vang or preventer applications.
|
$ 758.52
-
+
| ||
|
1-2 weeks delivery time The Barton 05900 is a Size 5 4:1 boom vang system with snap shackles and 54 mm blocks, designed for boats up to 10.7 m (35 ft). With a safe working load of 750 kg and a total weight of 1800 g, this professionally assembled system provides reliable boom control, efficient load handling, and quick deployment for vang or preventer applications.
|
$ 391.17
-
+
| ||
|
1-2 weeks delivery time The Barton 44010 is a sliding pin Boomstrut designed for boats up to 6 m (20 ft) with a maximum boom tip weight of 6.3 kg. Featuring flexible fibreglass rods and anodised fittings, it works alongside a kicker or rope vang to provide controlled upward boom support, maintaining sail shape and preventing the boom from dropping when the sail is lowered.
|
$ 553.68
-
+
| ||
|
1-2 weeks delivery time The Barton 44011 is a sliding pin boomstrut system with fiberglass rods, designed for boats up to 6 m. It provides constant upward force to support the boom, improving vang efficiency without moving parts, friction, or maintenance.
|
$ 581.34
-
+
| ||
|
1-2 weeks delivery time The Barton 44020 is a sliding pin boomstrut with fiberglass rods for boats from 6 to 7.5 m. With an adjustable length of 82–97 cm and maximum force of 145 kg, it provides constant boom support and improves sail handling without maintenance or moving parts.
|
$ 583.75
-
+
| ||
|
1-2 weeks delivery time The Barton 44021 is a sliding pin boomstrut with black fiberglass rods for boats from 6 to 7.5 m. With an adjustable length of 82–97 cm and maximum force of 145 kg, it provides constant boom support and improved sail handling without maintenance or moving parts.
|
$ 612.95
-
+
| ||
|
1-2 weeks delivery time The Barton 44030 is a sliding pin Boomstrut designed for boats from 7.5 to 9 m (25–30 ft) with a maximum boom tip weight of 15 kg. Featuring flexible fibreglass rods and anodised fittings, it works alongside a kicker or rope vang to provide constant upward boom support, improving sail shape and preventing uncontrolled boom drop when the sail is lowered.
|
$ 649.87
-
+
| ||
|
1-2 weeks delivery time The Barton 44031 is a sliding pin boomstrut with black fiberglass rods for boats from 7.5 to 9 m. Designed with a maximum force of 185 kg, it provides constant boom support and improves sail handling without moving parts or maintenance.
|
$ 682.36
-
+
| ||
|
1-2 weeks delivery time The Barton 44035 is a sliding pin Boomstrut designed for boats from 9 to 10.5 m (30–35 ft) with a maximum boom tip weight of 19 kg. Featuring flexible fibreglass rods and anodised fittings, it works with a kicker or rope vang to provide constant upward boom support, improving sail shape and preventing the boom from dropping when the sail is lowered.
|
$ 841.01
-
+
| ||
|
1-2 weeks delivery time The Barton 44036 is a sliding pin boomstrut with black fiberglass rods for boats from 9 to 10.5 m. Designed with a maximum force of 230 kg, it provides constant boom support and improves sail handling without moving parts or maintenance.
|
$ 883.05
-
+
| ||
|
1-2 weeks delivery time The Barton 44040 is a sliding pin Boomstrut designed for boats from 10.5 to 12 m (30–40 ft) with a maximum boom tip weight of 23 kg. Featuring flexible fibreglass rods and anodised fittings, it works alongside a kicker or rope vang to provide constant upward boom support, maintaining sail shape and preventing uncontrolled boom drop when the sail is lowered.
|
$ 910.72
-
+
| ||
What are the main types of blocks offered by Barton Marine for sailing applications?
Barton Marine offers a variety of blocks designed for different sailing applications, including winch, sheet, and traveller blocks made from durable materials like stainless steel, aluminium, and tufnol. These blocks are engineered to provide excellent control of sail and rigging lines, with options such as low-profile designs, carbon fibre construction, and composite materials that offer performance advantages in both cruising and racing conditions. Barton Marine's range also includes genoa cars and cam bases to ensure reliable and precise sail handling.
What materials are used in the manufacture of Barton Marine cleats for sailboats?
Barton Marine cleats for sailboats are manufactured using high-quality materials such as nylon and fabric-based laminated plastic called Tufnol. These materials provide a durable and low-profile design, which is resistant to the harsh marine environment and saltwater exposure, ensuring that the cleats fit securely and last a lifetime. The cleats are designed to offer strong support for control lines, enhancing the safety and performance of sailboats.
How does the K Cam from Barton Marine improve sail handling?
The K Cam from Barton Marine improves sail handling by providing a reliable grip on control lines, allowing for quick adjustments and secure locking during maneuvers. Made with a low-profile design and high-quality materials, such as fabric-based laminated plastic called Tufnol, the K Cam is durable and resistant to saltwater corrosion, ensuring smooth operation in harsh marine environments. Its ease of installation and compatibility with a range of sailing setups make it a trusted choice among crew members.