The Flojet Water Pump is a versatile and reliable solution for various water system needs in RVs and marine environments. Known for its high performance and durability, the Flojet RV water pump, part of the Xylem brand, is designed to dispense and boost water efficiently.
|
1-2 weeks delivery time The Flojet R4105512A is a self-priming diaphragm pump designed for circulation / feeder and general-purpose pumping applications on 12V DC power. It is listed with an output of 5.7 L/min (also stated as up to 6 L/min at 1 m head) and is specified with EPDM valves and a Santoprene diaphragm, plus a multi-diaphragm design for extended dry running. The pump includes snap-in ports with a 13 mm (1/2 inch) hose barb (also noted as connections for 15 mm (1/2 inch) bore hose), uses a continuously rated motor with thermal overload protection, and is rated at max. 1.2 A with a 1.5 A fuse.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4515-743 quad diaphragm pump is a self-priming diaphragm unit with an electric motor for the 4300 Series (Duplex Series pumps). It self-primes up to 2.4 m vertical lift and is rated to handle water-like and viscous liquids up to 250 cP, using a chemical-resistant polypropylene pump head and quick-connect plug-in ports. Optional pressure-switch control is referenced, along with service parts including rebuild kit 20409-043 and pressure switch kit 02090-118 (27–40 psi).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4405143A pressure-controlled diaphragm pump with internal bypass runs on 12V and provides up to 12.5 L/min (3.3 GPM) output. It is self-priming up to 2 m, can run dry without damage, and uses a pressure switch that cuts out at 2.5 bar (35 psi). The pump draws up to 3.9 A, measures 9.5 cm (H) x 10.8 cm (W) x 20.5 cm (L), has a shipping weight of 2.50 kg, and includes snap-in ports and 1/2-inch hose barb fittings (straight and 90° elbow).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4305500A pressure-controlled diaphragm pump is a 12V DC unit rated at 13 L/min (2.9 GPM) open flow with a pressure switch that cuts in at 1.7 bar (25 PSI) and cuts out at 2.5 bar (35 PSI). It supports multiple outlets, uses snap-in ports, and is suitable for 13 mm (1/2 inch) bore hose or Hep20 push-fit connectors CW193; the connection is also listed as 3/4 inch BSP / 1/2 inch hose connection. The pump is self-priming up to 1.5 m vertical lift, can run dry without damage, includes automatic thermal overload protection, and has a 10 A fuse size. Dimensions are 208 x 160 x 100 mm; actual weight is 2.08 kg (approx. 2.58 kg packed) with a listed shipping weight of 2.50 kg. Not available anymore; closest replacement is Flojet R4405143A.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4405343A is a pressure-controlled Quad II diaphragm pump with an internal bypass for marine, RV, and industrial water systems. It delivers up to 12.5 L/min (3.3 GPM), is self-priming up to 2 m, can run dry without damage, and uses a pressure switch with cut-out listed as 2.5 bar (35 psi) and also shown as 2.4 bar. Supplied with snap-in ports (2 x 14 mm (1/2 inch) QEST straight, 1 x 12 mm (1/2 inch) straight hose barb, and 1 x 12 mm (1/2 inch) 90° elbow hose barb), it draws up to 2.0 A and measures 9.5 cm (H) x 10.8 cm (W) x 20.5 cm (L) with a shipping weight of 2.50 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3722V5011ARL Duplex II diaphragm pump is a 230V AC demand-duty unit with a 60 PSI pressure switch for automatic shutoff and restart. It features a polypropylene pump body with a Viton diaphragm and Viton check valves, a medium-pressure cam, and 3/8 inch NPT female inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, operates on 50/60 Hz, has a maximum liquid temperature of 140°F, and weighs 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet BW5004-000A bottled water dispenser is a 230V, 50Hz unit with a 2-pin European plug, delivering up to 3.8 L/min (1.1 GPM) at a maximum pressure of 2.8 bar (40 psi). It includes a plus system that stops when the bottle is empty and restarts when refilled, an illuminated on/off switch, and a long-life diaphragm motor with thermal protection. Supplied with a 6 m discharge hose, quick disconnect ports, and noise-dampening rubber feet; control box size is 219 x 137 x 76 mm and unit weight is approximately 2.82 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4125502A is a self-priming Quad II diaphragm pump for 12V DC systems with open flow up to 18.9 L/min (5 GPM) and a maximum pressure limit of 3.4 bar (50 PSI). It features a continuously rated motor with thermal overload protection, a 4-chamber design with a Geolast diaphragm and Buna valves, self-priming up to 2.5 m vertical lift, and the ability to run dry without damage. Connections suit 19 mm (3/4 inch) bore hose; power consumption is 10 A with a 15 A fuse, maximum recommended total head is 4 m, overall dimensions are 252 x 160 x 100 mm, and actual weight is 2.86 kg (approx. 3.36 kg packed).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3231V5011AR is a self-priming Duplex II diaphragm demand pump for intermittent-duty fluid transfer, powered by 24V DC. It delivers up to 8 L/min (1.8 GPM), supports a maximum recommended total head of 30 m, and self-primes up to 2.4 m vertical lift with extended dry-running capability. The integrated pressure switch cuts in at 2.1 bar (40 PSI) and cuts out at 4.2 bar (60 PSI); maximum pressure is 4.2 bar (60 PSI) with an internal bypass pressure of 3.5 bar (50 PSI). It uses Viton diaphragms and valves with a polypropylene body, has 3/8 inch (9.5 mm) NPT female inlet/discharge ports, a 10 A fuse requirement (8 A current consumption stated), operating temperature range of 0°C to 50°C, and measures 204 x 101 x 92 mm with an approximate weight of 1.81 kg (2.30 kg shipping).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3121B1211 Duplex II diaphragm pump is a 12V DC unit with polypropylene body construction, a Buna diaphragm, and Buna check valves. It uses a low pressure cam, has no switch, and includes a 30 PSI pressure bypass via an external bypass system. Ports are 3/8 inch NPT female inlet and 3/8 inch NPT female discharge; self-priming is rated up to 8 ft (2.4 m), maximum fluid temperature is 140°F, and pump weight is 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 2100-737 duplex diaphragm pump and motor unit uses a 12V DC motor and is rated for 2.0 GPM with 40 PSI maximum pressure. It features a polypropylene pump body with a Santoprene diaphragm and Santoprene check valve. This self-priming, intermittent-duty Duplex Series pump supports extended dry running and can self-prime up to 7 ft of vertical lift.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D21X005B Duplex II diaphragm pump is a 12V DC demand-duty unit with a 60 PSI pressure switch and a low pressure cam. It features polypropylene body construction with a Santoprene diaphragm and Viton check valve, plus 3/8 inch NPT female inlet and 3/8 inch NPT female discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum fluid temperature of 140°F, and weighs 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4105143A is a self-priming diaphragm shower drain pump for efficient water drainage and wastewater removal. It operates on 12V DC and is rated at 12.5 L/min (also stated as up to 13 L/min / 2.9 GPM at 1 m head), with a maximum pressure rating of 1.2 bar (17 psi). The pump uses a quad diaphragm design for extended dry running, includes a continuously rated motor with thermal overload protection, and connects via 13 mm (1/2 inch) hose connections with snap-in ports; self-priming vertical lift is listed up to 2.5 m (also stated up to 2 m).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 2100-953 duplex diaphragm pump and motor unit operates on 115V AC and is designed for intermittent duty. This self-priming diaphragm unit features a duplex diaphragm design for extended dry running and can self-prime up to 7 ft of vertical lift.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 4300-528A quad diaphragm pump and motor unit is a 12V DC pressure-controlled device rated for 3.5 GPM and 45 PSI maximum. It uses a polypropylene body with a Santoprene diaphragm and Viton check valve, and it is supplied with a pressure switch. This self-priming pump is specified for up to 2.4 m vertical lift and can handle water-like and viscous liquids up to 250 cP.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D1625H7011 is a self-priming Duplex II diaphragm pump driven by an AC electric motor. It is designed to handle water-like and viscous liquids up to 250 cP and uses a chemical-resistant polypropylene pump head. The pump features internal check valves for reliable self-priming and supports optional pressure switch control for on-demand operation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D36X001A Duplex II diaphragm pump is a 115V AC demand-duty unit with a 45 PSI pressure switch and 3/8 inch NPT female inlet and discharge ports. It features a polypropylene body, Viton diaphragm, Santoprene check valve, and a low pressure cam, is self-priming up to 8 ft (2.4 m), and can run dry without damage. Additional stated limits include 50/60 Hz operation, maximum fluid temperature of 140°F, maximum inlet pressure of 30 PSI (2.1 bar), and an approximate weight of 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet Duplex II self-priming diaphragm pump is a 24V DC unit rated for 2 GPM (7.6 L/min) and listed with an output of 7 L/min at free discharge (without back pressure). It self-primes up to 2.4 m vertical lift, supports intermittent (demand) duty with an integrated pressure switch (cut-in 6 bar / 85 PSI, cut-out 7.1 bar / 100 PSI), and uses a duplex diaphragm design with nitrile diaphragm and valves. Ports are 3/8 inch NPT female inlet and discharge; current draw is 8A with a 5A fuse noted, and overall size is 204 x 101 x 92 mm with pump weight approx. 2.23 kg (about 2.70–2.73 kg packed/shipping).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4105503A Quad Series self-priming diaphragm pump is a 24V DC, four-chamber unit rated at 13 L/min (3.3 GPM) at free discharge (no back pressure). It is self-priming up to 2.5 m, dry-run safe, and supplied without a pressure switch. The pump uses a 19 mm (3/4 inch) hose connection, draws 4 A, features a polypropylene housing with Geolast and nitrile elastomers, includes a suction filter/strainer, and has approximate dimensions of 20.8 x 16.0 x 10.0 cm with a shipping weight of 2.60 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 2135-562 duplex diaphragm pump and motor unit is a 12V DC self-priming pump rated at 1.6 GPM with 60 PSI maximum pressure. It has a polypropylene body with a Buna diaphragm and Viton check valve, 1/4 NPT ports, and includes a pressure switch. The Duplex Series design supports intermittent duty, extended dry running, and self-priming up to 7 ft of vertical lift.
|
Our managers will contact you and clarify the terms of the order
| ||
What are the primary applications for a Flojet Water Pump in an RV?
The primary applications for a Flojet water pump include RV water systems, marine water pumps, and bottled water dispensing systems. These pumps are ideal for use in water system pumps, providing reliable water pressure for various applications such as the Flojet BW5000 bottled water system and the r3526144d RV water pump. Additionally, Flojet pumps are used in water booster systems, water dispensers, and car wash setups, ensuring consistent water flow and pressure with features like a diaphragm water pressure pump and pressure switch integration.
Moreover, the Flojet water pump system includes various components such as inlets, electric pumps, and replacement parts, making it versatile for different needs. With products from Xylem US, RV pumps are designed for durability and efficiency. They are compatible with RV waste pumps, 5-gallon water transfer pumps, and a range of other pumps and accessories. Flojet pumps, such as those in the 2840 series, are known for their quality and reliability, and they include features like switch kits, 12 V operation, and compatibility with dispensing pumps and refrigerator water systems. Established as a trusted brand, Flojet offers a wide selection of products suitable for various water system needs.
How does the diaphragm technology in a Flojet RV Water Pump improve its performance?
The diaphragm technology in a Flojet RV water pump, such as the quad series, significantly improves its performance by providing consistent and reliable water pressure. This technology ensures that the pump operates efficiently, minimizing pulsation and allowing for smooth water flow. Additionally, the use of high-quality materials like polypropylene and thermoplastic in the diaphragm enhances durability and compatibility with various water systems, including those used in RVs and marine products.
For optimal water system performance onboard, explore our full range of Marine Water Pump solutions.
What are the primary applications of the Flojet Pump in a water system?
The primary applications of the Flojet pump in a water system include RV water systems, bottled water dispensing, and water transfer tasks. Equipped with Flojet diaphragm technology, these pumps ensure reliable performance in RV water system pump series, handling everything from 5-gallon water transfer to waste pumping. Additionally, they are compatible with various water filters, check valves, and accumulators, making them versatile solutions for both recreational and food and beverage applications.
For marine applications, Flojet pumps also serve as dependable Boat Water Pump solutions, offering consistent pressure and flow for fresh water systems aboard yachts and boats.