The Flojet Water Pump is a versatile and reliable solution for various water system needs in RVs and marine environments. Known for its high performance and durability, the Flojet RV water pump, part of the Xylem brand, is designed to dispense and boost water efficiently.
|
1-2 weeks delivery time The Flojet 2100-112A duplex diaphragm pump-and-motor assembly is a 12V DC self-priming diaphragm unit rated at 2.1 GPM with a maximum pressure of 60 PSI and supplied with a pressure switch. It is an intermittent-duty Duplex Series pump with a #2 cam and is designed to allow extended dry running, with self-priming capability up to 7 ft vertical lift.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D31X015F Duplex II diaphragm pump is a 12V DC unit with a nylon body, a Buna diaphragm, and a Buna check valve, equipped with a 50 PSI pressure bypass. It has 3/8 inch NPT female inlet and discharge ports, is self-priming up to 8 ft (2.4 m), and can run dry without damage. Maximum temperature is 140°F, maximum inlet pressure is 30 PSI (2.1 bar), and pump weight is 5 lb; it is intended for intermittent duty cycles and is not recommended for continuous duty service.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D1625H7011B Duplex II diaphragm pump is a self-priming unit with an AC electric motor for Duplex Series pump applications. It is specified for water-like and viscous liquids up to 250 cP and uses a chemical-resistant polypropylene pump head. The design includes internal check valves for reliable self-priming, with optional pressure switch control to run the pump only as needed.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 91010253A adapter O-ring kit is a replacement seal kit for an RV waste water pump. It is compatible with Flojet 18555000A, 18555000, 18555-000A, and 18555-000, and has a shipping weight of 0.10 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 4125-014A is a quad diaphragm pump and motor unit for Duplex Series pump applications. It is rated for 115 Volt operation and is supplied as a no-switch configuration with a cord, listed as G/B 4C.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet LF221422 diaphragm pump and motor unit is a 24V DC Industrial LF Series duplex diaphragm demand pump designed for a wide range of applications, including liquid transfer, spraying, circulation, filtration, and dispensing. It is self-priming, can run dry without harm, is intended for intermittent duty cycles (with short periods of continuous operation), and includes a built-in thermal protector plus a soft compliant Santoprene mounting system.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4400-504A quad diaphragm pump is a self-priming diaphragm pump with an electric motor in the 4300 Series. It self-primes up to a 2.4 m vertical lift and handles water-like and viscous liquids up to 250 cP. The four-piston design supports higher flow rates, and it uses a chemical-resistant polypropylene pump head with quick-connect plug-in ports; optional pressure-switch control is available. Listed available part: Catalog #20403-040, Kit Quad Dia Santoprene.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3235H1411AR self-priming duplex diaphragm pump is a 24V DC unit rated up to 1.9 GPM and listed with an output of 8 L/min (1.8 GPM) at free discharge. It features an internal bypass with automatic shutoff at 4.8 bar (70 PSI), self-priming up to 2.4 m vertical lift, and a maximum recommended total head of 30 m for intermittent duty. The pump has 3/8 inch (9.5 mm) NPT connections, a polypropylene housing with Santoprene diaphragm and EPDM valves/elastomers, a 10 A fuse size, 8 A current consumption, dimensions of 204 x 101 x 92 mm, and a weight of 2.19 kg (approx. 2.69 kg packed).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 02100-689 diaphragm pump is a self-priming Duplex II Series unit with an AC electric motor for intermittent duty operation. It features a duplex diaphragm design that allows extended dry running and can self-prime up to 7 feet of vertical lift. Rated for 115 VAC.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 04300-343A diaphragm pump is a self-priming, electric-motor-driven unit from the 4300 Series (Quad Pump) designed for water-like and viscous liquids up to 250 cP. It self-primes up to 2.4 m vertical lift and uses a four-piston design for higher flow rates, with a chemical-resistant polypropylene pump head and quick-connect plug-in ports. The pump is specified for 115 VAC operation and supports optional pressure-switch control.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet LF221421 diaphragm pump and motor unit is a 24V DC industrial LF series duplex diaphragm pump for applications such as liquid transfer, spraying, circulation, filtration, and dispensing. It is self-priming, can run dry without harm, and is intended for intermittent duty cycles (with continuous operation possible for short periods). Key design elements include a compact automatic demand configuration, a built-in thermal protector, low amp draw for battery-powered use, and a soft compliant Santoprene mounting system.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet Duplex II series diaphragm pump assembly is a 115V AC demand-duty unit equipped with a 100 PSI pressure switch and high-pressure cam. It uses a polypropylene pump body with a Viton diaphragm and Santoprene check valve, and it features 3/8 inch John Guest push-fit inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, operates on 50/60 Hz power, has a maximum fluid temperature rating of 140°F, and weighs 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3121B3011A Duplex II diaphragm pump is a 12V DC demand-duty unit with a 30 PSI pressure switch and a low pressure cam. It features polypropylene body construction with a Buna diaphragm and Buna check valves, plus 3/8 inch NPT female inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum temperature rating of 140°F, and weighs 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet RLF122201D self-priming diaphragm pump delivers up to 3.8 litres per minute on 12V DC power with a maximum head of 25 meters, combining a duplex diaphragm design for extended dry running with self-priming up to 0.7 meters. Santoprene diaphragms and Viton valves enhance durability, while the built-in pressure switch operates between 1.7 bar and 2.4 bar for controlled operation. Intermittent duty and thermal overload protection support safe use, and installation is simplified with 9.5 mm (3/8 in) bore hose connections and a required 5-amp fuse.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3631H1311AR Duplex II diaphragm pump is a 115V AC unit with a polypropylene pump body, EPDM diaphragm, and Santoprene check valves. It uses a medium-pressure cam and an external bypass set to 50 PSI, with no switch (manual on/off control required). The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has 3/8 inch NPT female inlet and discharge ports, operates on 50/60 Hz power, and has a maximum temperature rating of 140°F; weight is 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3732E1311 Duplex II diaphragm pump is a 230V AC pump with a polypropylene body, EPDM diaphragm, and EPDM check valve, built with a high-pressure cam and no switch. It uses an external bypass system with a 50 PSI pressure bypass and has 3/8 inch NPT female inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, operates on 50/60 Hz power, has a maximum fluid temperature of 140°F, and weighs 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D48X002B Duplex II diaphragm pump is a 115V AC demand-duty unit with an integrated pressure switch that shuts off at 45 PSI. It features a polypropylene body and 3/8 inch NPT female inlet and discharge ports, is self-priming up to 8 ft (2.4 m), and can run dry without damage. The motor is rated for 50/60 Hz, maximum fluid temperature is 140°F, and pump weight is 5 lb; maximum inlet pressure is 30 PSI (2.1 bar).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D7231B5011 is a Duplex II diaphragm pump assembly with a 24V DC motor and a 60 PSI pressure switch for demand (intermittent duty) operation. It features a polypropylene pump body, Buna diaphragm, and Buna check valve, plus a medium pressure cam. Ports are 3/8 inch NPT female inlet and 3/8 inch NPT female discharge, and the pump is self-priming up to 8 ft (2.4 m) and can run dry without damage; maximum fluid temperature is 140°F and weight is 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet ET508244A oscillating pump is a Duplex Series unit rated for 230 Volt AC. It is designed for general consumer, commercial, and industrial applications, and is described as self-priming, double insulated, and built to draw low amps for cool operation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3631E1311 diaphragm pump is a Flojet Duplex II series unit with a polypropylene body, EPDM diaphragm, and EPDM check valve, driven by a 115V AC motor (50/60 Hz). It uses a medium pressure cam and has no switch, with an external 50 PSI pressure bypass that continues running until power is manually turned off. Ports are 3/8 inch NPT female inlet and 3/8 inch NPT female discharge; the pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum liquid temperature of 140°F, and weighs 5 lb.
|
Our managers will contact you and clarify the terms of the order
| ||
What are the primary applications for a Flojet Water Pump in an RV?
The primary applications for a Flojet water pump include RV water systems, marine water pumps, and bottled water dispensing systems. These pumps are ideal for use in water system pumps, providing reliable water pressure for various applications such as the Flojet BW5000 bottled water system and the r3526144d RV water pump. Additionally, Flojet pumps are used in water booster systems, water dispensers, and car wash setups, ensuring consistent water flow and pressure with features like a diaphragm water pressure pump and pressure switch integration.
Moreover, the Flojet water pump system includes various components such as inlets, electric pumps, and replacement parts, making it versatile for different needs. With products from Xylem US, RV pumps are designed for durability and efficiency. They are compatible with RV waste pumps, 5-gallon water transfer pumps, and a range of other pumps and accessories. Flojet pumps, such as those in the 2840 series, are known for their quality and reliability, and they include features like switch kits, 12 V operation, and compatibility with dispensing pumps and refrigerator water systems. Established as a trusted brand, Flojet offers a wide selection of products suitable for various water system needs.
How does the diaphragm technology in a Flojet RV Water Pump improve its performance?
The diaphragm technology in a Flojet RV water pump, such as the quad series, significantly improves its performance by providing consistent and reliable water pressure. This technology ensures that the pump operates efficiently, minimizing pulsation and allowing for smooth water flow. Additionally, the use of high-quality materials like polypropylene and thermoplastic in the diaphragm enhances durability and compatibility with various water systems, including those used in RVs and marine products.
For optimal water system performance onboard, explore our full range of Marine Water Pump solutions.
What are the primary applications of the Flojet Pump in a water system?
The primary applications of the Flojet pump in a water system include RV water systems, bottled water dispensing, and water transfer tasks. Equipped with Flojet diaphragm technology, these pumps ensure reliable performance in RV water system pump series, handling everything from 5-gallon water transfer to waste pumping. Additionally, they are compatible with various water filters, check valves, and accumulators, making them versatile solutions for both recreational and food and beverage applications.
For marine applications, Flojet pumps also serve as dependable Boat Water Pump solutions, offering consistent pressure and flow for fresh water systems aboard yachts and boats.