ID
1349891
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet D36X001A Duplex II diaphragm pump is a 115V AC demand-duty unit with a 45 PSI pressure switch and 3/8 inch NPT female inlet and discharge ports. It features a polypropylene body, Viton diaphragm, Santoprene check valve, and a low pressure cam, is self-priming up to 8 ft (2.4 m), and can run dry without damage. Additional stated limits include 50/60 Hz operation, maximum fluid temperature of 140°F, maximum inlet pressure of 30 PSI (2.1 bar), and an approximate weight of 5 lb.
- Description
- Ask a Question
-
Flojet Duplex II Demand Diaphragm Pump with Pressure Switch
The Flojet D36X001A is a Duplex II series diaphragm pump designed for a wide range of applications such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing. It is a demand-duty pump equipped with a pressure switch that automatically stops the pump when discharge pressure reaches the switch off setting and restarts when a valve is opened.
Technical Specifications
Series Duplex II Pump Type Diaphragm Pump Body Material Polypropylene Diaphragm Material Viton Check Valve Material Santoprene Cam Low Pressure Cam Pressure Switch Setting (Off Set Point) 45 PSI Motor Voltage 115 Volt AC Frequency 50/60 Hz Inlet Port 3/8 inch NPT Female Discharge Port 3/8 inch NPT Female Self-Priming Up to 8 ft (2.4 m) Maximum Fluid Temperature 140°F Maximum Inlet Pressure 30 PSI (2.1 bar) Weight 5 lb
Features
- Demand-duty operation with pressure switch control (shuts off at 45 PSI when discharge is closed)
- Self-priming up to 8 ft (2.4 m)
- Can run dry without damage
- Pump head can be rotated in 90 degree increments to simplify plumbing
- Designed with a new diaphragm and valve design to enable higher dry vacuum capability
Product Details
- Typical uses listed: liquid transfer, spraying, cooling, circulation, filtration, and dispensing; generally used for general agricultural applications.
- Do not use to pump flammable fluids (including gasoline, kerosene, and fuel oil) and do not use in an explosive environment.
- If a check valve is installed in the plumbing, the stated cracking pressure must be no more than 2 PSI (0.14 bar).
- A minimum 40 mesh strainer or filter in the inlet line is recommended to help prevent debris from entering the pump.
- Recommended tubing guidance: minimum 3/8 inch ID and at least 20 inches in length; avoid crimping or kinking.
-
Popular products
