The Flojet Water Pump is a versatile and reliable solution for various water system needs in RVs and marine environments. Known for its high performance and durability, the Flojet RV water pump, part of the Xylem brand, is designed to dispense and boost water efficiently.
|
1-2 weeks delivery time The Flojet 4100-502 quad diaphragm pump and motor unit is a 12V DC pump rated for 5 GPM with a maximum pressure of 40 PSI. It features a polypropylene body, a Santoprene diaphragm, and a Viton check valve, with 3/4-inch hose barb ports. Listed as a Duplex Series pump, it also has an available service kit: catalog 20403-040 (Quad diaphragm, Santoprene).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 2100-959 duplex diaphragm pump and motor unit is a 12V DC self-priming pump rated at 1.8 GPM with 70 PSI maximum pressure. It uses a polypropylene body with a Santoprene diaphragm and Viton check valve, and includes a single bypass. This intermittent-duty Duplex Series design supports extended dry running and self-primes up to 7 ft vertical lift; the manufacturer update ships this catalog number as Flojet D21X003.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 02091150 pressure control switch is a 150 PSI (10.3 bar) unit designed for Flojet R3811 series high-pressure pumps. It is compatible with 12V and 24V DC systems and uses a VITON diaphragm with EPDM seals/O-rings. The switch is normally open and closes at a preset pressure, with a 10 A (max) electrical rating, threaded connection, direct-mount installation, IP65 protection class, and a 0°C to 65°C operating temperature range; dimensions are 5.00 x 5.00 x 5.00 cm and weight is 0.05 kg (approx. 0.25 kg packed).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D71X000B is a Duplex II series diaphragm pump with a 12 Volt DC motor, polypropylene body construction, Buna diaphragm, and Buna check valve. It uses 3/8 inch NPT female inlet and discharge ports and includes a 50 PSI pressure bypass (with an external bypass system that bypasses flow internally when pressure is over 60 PSI). The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum temperature of 140 °F, and weighs 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet LF152421 diaphragm pump and motor unit is a 12V DC duplex series pump designed for a wide range of industrial applications. It is self-priming, can run dry without harm, and is intended for intermittent duty cycles (with short periods of continuous operation). Unit marking/specification shown as S/V 2C SW40 BP55.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3135E7011A Duplex II diaphragm pump is a 12V DC demand-duty unit with a 100 PSI pressure switch and high-pressure cam. It uses a polypropylene body with an EPDM diaphragm and EPDM check valve, and has 3/8 inch NPT female inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, is rated for a maximum temperature of 140°F, and weighs 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D3135B1311AR is a self-priming duplex diaphragm bypass pump for 12V DC systems, designed for fluid transfer with extended dry-running capability. It delivers up to 7.5 L/min (1.9 GPM), provides a self-priming lift up to 2.4 m, and has a maximum recommended total head of 30 m. The internal bypass is set to 3.5 bar (50 psi), with 3/8 inch (9.5 mm) NPT connections; it uses nitrile diaphragms and valves with EPDM O-rings and a polypropylene housing, and is specified for intermittent duty operation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 2100-987A duplex diaphragm pump and motor unit uses a 12V DC motor and is rated for 1.6 GPM with 65 PSI maximum pressure. It features polypropylene body construction with a Buna diaphragm and a Viton check valve. This self-priming Duplex Series pump is intended for intermittent duty, supports extended dry running, and can self-prime up to 7 ft vertical lift; the manufacturer update indicates it will ship as Flojet catalog number D2131I5011A.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D31X032 diaphragm pump and motor unit is a 12V DC self-priming Duplex II DC Bypass Series pump. It is designed to handle water-like and viscous liquids up to 250 cP and uses a chemical-resistant polypropylene pump head. The unit includes internal check valves to support reliable self-priming and an internal bypass for a wide performance range.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4400-507A is a self-priming quad diaphragm pump with an electric motor from the 4300 Series. It self-primes up to 2.4 m vertical lift, handles water-like and viscous liquids up to 250 cP, and uses a four-piston design for higher flow rates. The pump features a chemical-resistant polypropylene pump head, quick-connect plug-in ports, and optional pressure switch control.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4300540A MPU induction motor delivers reliable, efficient operation with a 230V power rating and a stated flow rate of 17 liters per minute. Built in stainless steel for durability and longevity, it is suited to demanding industrial environments and supports a wide range of industrial applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet D1621E1211A Duplex II diaphragm pump is a 115V AC unit with a polypropylene body, EPDM diaphragm, and EPDM check valves. It uses a low-pressure cam, has no switch, and includes an external 30 PSI pressure bypass that recirculates flow internally above the bypass setting. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, and features 3/8-inch NPT female inlet and discharge ports; motor frequency is 50/60 Hz and listed weight is 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet R4325-513A pump and motor unit is a 24V DC quad diaphragm, self-priming pump rated to 45 PSI and supplied with a CE label. This 4300 Series four-piston design self-primes up to 2.4 m vertical lift, handles water-like and viscous liquids up to 250 cP, and uses a chemical-resistant polypropylene pump head with quick-connect plug-in ports.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet LF111421D diaphragm pump and motor unit is a 12V DC duplex diaphragm pump with a fin-cooled motor. It includes a sealed pressure switch for automatic start/stop, is self-priming, can run dry without damage, and has an integral 5 amp inline fuse with cover. It is intended for intermittent duty cycles and is commonly used for liquid transfer, spraying, circulation, filtration, and dispensing.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 4405-343A pump and motor unit is a 24V DC quad diaphragm pump rated for 3.3 GPM flow with 35 PSI maximum pressure. It is supplied with a pressure switch, self-primes up to 2.4 m vertical lift, and uses quick-connect plug-in ports for easier installation. Series: 4405 Series (listed under Duplex Series Pumps).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 03710-A42 diaphragm pump is an Industrial Triplex Low Pressure Series automatic demand unit for intermittent duty applications such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing. It is self-priming, can run dry without harm, and includes an internal bypass for smooth operation at low flows. Rated for flow up to 2.0 GPM (7.6 L/min) and operating pressure up to 50 PSI (3.4 bar), it is fitted with a 60 PSI pressure switch and uses Viton valves with a Santonprene diaphragm.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 04305-500 diaphragm pump is a 4305 Series unit designed to self-prime up to 2.4 m vertical lift and uses quick-connect plug-in ports for easier installation. Listed service parts include the 20409-043 Quad Pump Service Kit (check valve assembly, diaphragm assembly, side clips, drive cam assembly), the 02009-073A 12V motor, and the 02090-104 standard pressure switch kit (noted for Duplex II Series pumps, 115 VAC).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 4305-144 quad diaphragm pump and motor unit is a 12V DC demand pump rated at 3.5 GPM. It self-primes up to 2.4 m vertical lift and uses quick-connect plug-in ports for easier installation. Listed available part: pressure switch kit 02090-118 (27–40 PSI).
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet Duplex II series diaphragm pump assembly uses a 24 Volt DC motor with a 50 PSI pressure bypass and no switch for manual on/off control. It features a polypropylene pump body, EPDM diaphragm, Santoprene check valve, and a medium pressure cam, with 3/8 inch NPT female inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum fluid temperature of 140°F, and weighs 5 lbs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Flojet 2130-517-115 duplex diaphragm pump and motor unit is a 115V AC self-priming pump rated at 1.6 GPM with a maximum pressure of 95 PSI. It features a nylon body with an EPDM diaphragm and EPDM check valve, includes a pressure switch, and is designed for intermittent duty. The duplex diaphragm design supports extended dry running and self-primes up to 7 ft vertical lift.
|
Our managers will contact you and clarify the terms of the order
| ||
What are the primary applications for a Flojet Water Pump in an RV?
The primary applications for a Flojet water pump include RV water systems, marine water pumps, and bottled water dispensing systems. These pumps are ideal for use in water system pumps, providing reliable water pressure for various applications such as the Flojet BW5000 bottled water system and the r3526144d RV water pump. Additionally, Flojet pumps are used in water booster systems, water dispensers, and car wash setups, ensuring consistent water flow and pressure with features like a diaphragm water pressure pump and pressure switch integration.
Moreover, the Flojet water pump system includes various components such as inlets, electric pumps, and replacement parts, making it versatile for different needs. With products from Xylem US, RV pumps are designed for durability and efficiency. They are compatible with RV waste pumps, 5-gallon water transfer pumps, and a range of other pumps and accessories. Flojet pumps, such as those in the 2840 series, are known for their quality and reliability, and they include features like switch kits, 12 V operation, and compatibility with dispensing pumps and refrigerator water systems. Established as a trusted brand, Flojet offers a wide selection of products suitable for various water system needs.
How does the diaphragm technology in a Flojet RV Water Pump improve its performance?
The diaphragm technology in a Flojet RV water pump, such as the quad series, significantly improves its performance by providing consistent and reliable water pressure. This technology ensures that the pump operates efficiently, minimizing pulsation and allowing for smooth water flow. Additionally, the use of high-quality materials like polypropylene and thermoplastic in the diaphragm enhances durability and compatibility with various water systems, including those used in RVs and marine products.
For optimal water system performance onboard, explore our full range of Marine Water Pump solutions.
What are the primary applications of the Flojet Pump in a water system?
The primary applications of the Flojet pump in a water system include RV water systems, bottled water dispensing, and water transfer tasks. Equipped with Flojet diaphragm technology, these pumps ensure reliable performance in RV water system pump series, handling everything from 5-gallon water transfer to waste pumping. Additionally, they are compatible with various water filters, check valves, and accumulators, making them versatile solutions for both recreational and food and beverage applications.
For marine applications, Flojet pumps also serve as dependable Boat Water Pump solutions, offering consistent pressure and flow for fresh water systems aboard yachts and boats.