ID
1213263
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet D3231V5011AR is a self-priming Duplex II diaphragm demand pump for intermittent-duty fluid transfer, powered by 24V DC. It delivers up to 8 L/min (1.8 GPM), supports a maximum recommended total head of 30 m, and self-primes up to 2.4 m vertical lift with extended dry-running capability. The integrated pressure switch cuts in at 2.1 bar (40 PSI) and cuts out at 4.2 bar (60 PSI); maximum pressure is 4.2 bar (60 PSI) with an internal bypass pressure of 3.5 bar (50 PSI). It uses Viton diaphragms and valves with a polypropylene body, has 3/8 inch (9.5 mm) NPT female inlet/discharge ports, a 10 A fuse requirement (8 A current consumption stated), operating temperature range of 0°C to 50°C, and measures 204 x 101 x 92 mm with an approximate weight of 1.81 kg (2.30 kg shipping).
- Description
- Ask a Question
-
Duplex II Self-Priming Diaphragm Demand Pump (24V DC)
The Flojet D3231V5011AR is a Duplex II series, self-priming diaphragm pump built for efficient fluid transfer in intermittent-duty systems. Its duplex diaphragm design supports extended dry running, while the integrated pressure switch provides automatic on/off control for demand operation.
Technical Specifications
Operating Voltage 24V DC Pump Type Self-Priming Diaphragm Pump Max Flow Rate Up to 8 L/min (1.8 GPM) Maximum Recommended Total Head 30 m (98.4 ft) Self-Priming Vertical Lift Up to 2.4 m (7.9 ft / 8 ft stated) Pressure Switch (Cut-In) 2.1 bar (40 PSI) Pressure Switch (Cut-Out) 4.2 bar (60 PSI) Maximum Pressure 4.2 bar (60 PSI) Internal Bypass Pressure 3.5 bar (50 PSI) Connections / Port Size 3/8 inch (9.5 mm) NPT Inlet Port 3/8 inch NPT female Discharge Port 3/8 inch NPT female Body / Housing Material Polypropylene Diaphragm Material Viton Valve / Check Valve Material Viton Operating Duty Intermittent (Demand Duty) Current Consumption 8 A Fuse Size 10 A Recommended Operating Temperature Range 0°C to 50°C (32°F to 122°F) Dimensions 204 mm (L) x 101 mm (W) x 92 mm (H) Weight 1.81 kg (approx.) Packaged Weight Approx. 2.31 kg packed; 2.30 kg shipping weight stated Packaged Dimensions 32.00 cm (L) x 12.00 cm (W) x 11.00 cm (H) Product Portfolio Water Pressure Systems Certificates CE, RoHS
Features
- Duplex diaphragm design for extended dry-running capability
- Self-priming up to 2.4 m vertical lift
- Integrated pressure switch for automatic demand operation (40 PSI cut-in / 60 PSI cut-out)
- Viton diaphragms and valves for chemical resistance
- Low-noise operation stated due to a noise-dampening design
Product Details
- Typical uses stated: fluid handling, irrigation, water treatment, liquid transfer, spraying, cooling, circulation, filtration, dispensing, and general industrial applications.
- Compatible fluids stated: water, mild chemicals, oils, and other non-corrosive fluids.
- Motor details stated: permanent magnet type with a solid-state rectifier and full RFI suppression.
- Important notes stated: do not use for flammable fluids (including gasoline, kerosene, fuel oil) and do not use in an explosive environment.
- Installation notes stated: inlet pressure must not exceed 30 PSI (2.1 bar) maximum; use of a minimum 40 mesh strainer or filter in the inlet line is recommended.
-
Popular products
