ID
1349657
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet D21X005B Duplex II diaphragm pump is a 12V DC demand-duty unit with a 60 PSI pressure switch and a low pressure cam. It features polypropylene body construction with a Santoprene diaphragm and Viton check valve, plus 3/8 inch NPT female inlet and 3/8 inch NPT female discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum fluid temperature of 140°F, and weighs 5 lb.
- Description
- Ask a Question
-
Flojet Duplex II Demand Diaphragm Pump With 60 PSI Switch
The Flojet D21X005B is a Duplex II series diaphragm pump built for demand operation, automatically stopping and starting based on system pressure. It is intended for intermittent duty cycles and is commonly used for liquid transfer, spraying, cooling, circulation, filtration, and dispensing applications.
Technical Specifications
Series Duplex II Pump Type Diaphragm pump (demand duty) Motor Voltage 12V DC Pressure Switch Setting (Off Set Point) 60 PSI Body Material Polypropylene Diaphragm Material Santoprene Check Valve Material Viton Cam Low pressure cam Inlet Port 3/8 inch NPT female Discharge Port 3/8 inch NPT female Self-Priming Up to 8 ft (2.4 m) Dry-Run Capability Can run dry without damage Maximum Fluid Temperature 140°F Weight 5 lb Maximum Inlet Pressure 30 PSI (2.1 bar)
Features
- Demand operation: pressure switch shuts off at 60 PSI when the discharge valve is closed and restarts when pressure drops
- Self-priming up to 8 ft (2.4 m)
- Dry-run capable without damage
- New diaphragm and valve design to pull higher dry vacuum (per series description)
- Pump head can be rotated in 90-degree increments to simplify plumbing
Product Details
- Typical uses include liquid transfer, spraying, cooling, circulation, filtration, and dispensing; generally used for agricultural applications.
- Intermittent duty application: higher duty cycles can shorten pump life; it can be run continuously for short periods of time.
- Do not use to pump flammable fluids (gasoline, kerosene, fuel oil, etc.) and do not use in an explosive environment.
- Inlet pressure must not exceed 30 PSI (2.1 bar).
-
Popular products
