|
1-2 weeks delivery time The VDO 2-250-234 cork sealing ring is a 54 mm seal designed for fuel level sender mounting, helping create a secure, leak-free connection that supports stable and accurate fuel level readings. Made from cork and intended for 54 mm SAE 5-hole flange installations (for example VDO 54 mm fuel senders), it protects the fuel system sealing surface and is supplied as a single seal in a VDO Parts retail package.
|
$ 4.03
-
+
| ||
|
1-2 weeks delivery time The VDO 2-250-264-1241 steel tank flange is a weld-mount round flange with a 54 mm installation diameter for dependable tank level system installation. Built for rugged service with IP67 protection, it supports Cockpit-series instrumentation setups and is suited to VDC electrical systems with analog display applications. Designed as a 54 mm SAE 5-hole weld flange, it is commonly used with VDO 54 mm fuel senders and supplied as a single-piece retail-packaged component.
|
$ 5.42
-
+
| ||
|
VDO 226-801-015-001C – Adjustable Fuel Lever Arm Sender 3-180 Ohm for Tank Depth 150-600 mm (10 pcs)
1-2 weeks delivery time The VDO 226-801-015-001C adjustable lever arm fuel level sender (VDO 145 sender type) is built for reliable fuel level measurement in tanks from 150 mm to 600 mm deep, using a 3–180 Ohm empty-to-full signal for connection to a fuel gauge. With a 5-hole SAE 54 mm mounting flange, insulated return signal, and an AMP blade 6.3 x 0.8 mm connector, it supports accurate real-time fuel monitoring across oil, petroleum, diesel, and gasoline systems on 6–24 V DC installations, supplied as an OEM bulk package of 10 senders.
|
$ 863.60
-
+
| ||
|
1-2 weeks delivery time The VDO 226-801-015-001G adjustable fuel level lever arm sender provides stable, accurate tank level readings for systems using a 3–180 Ohm signal (empty to full) across tank depths from 150 mm to 600 mm. Designed for straightforward installation on a 54 mm 5-hole SAE mounting flange, it supports 6–24 V DC operation and uses an insulated return signal with an AMP blade 6.3 x 0.8 mm connector, making it a flexible choice for fuel monitoring on tanks filled with oil, petroleum, diesel, or gasoline.
|
$ 105.77
-
+
| ||
|
1-2 weeks delivery time The VDO 226-828-001-001K adjustable float arm level sender is a resistive fresh-water sensor designed for dependable tank level monitoring across adjustable tank depths from 200 mm to 600 mm. Using a 3–180 Ohm signal (empty to full) and a 54 mm, 2 1/8 inch bolt circle mounting pattern, it provides stable, accurate analog level feedback for compatible water level instruments on a common-ground system.
|
$ 634.67
-
+
| ||
|
1-2 weeks delivery time The adjustable VDO 226801015001 fuel level sender with lever arm provides precise in-tank fuel level indication using a 3–180 Ohm resistance signal. Designed to be set up for tank depths from 150 to 600 mm, it supports accurate gauge readings across a wide range of installations, making it a practical choice for fuel systems that require an adjustable float-arm measurement solution.
|
$ 97.02
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-001-004C oil pressure switch is a compact switching device that closes its contact as pressure rises above 0.40 bar, providing a dependable warning signal for monitoring circuits. Built with an M10 x 1 tapered short male thread and a 1-pole common-ground design, it supports 6–24 V DC systems and switches up to 5 W (non-inductive), making it well suited for robust oil-pressure warning and control functions across a wide range of installations.
|
$ 148.84
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-003-012C pressure switch is a single-pole common-ground warning switch that closes the contact as pressure falls below 6.00 PSI, supporting dependable low-pressure monitoring in oil, fuel, or air systems. With a 1/8-27 NPTF male thread, M4 screw connection, and up to 5 W non-inductive switching capacity across 6–24 V DC systems, it provides stable, repeatable switching for control circuits and warning lamps.
|
$ 157.88
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-003-015C pressure switch is a compact monitoring device for engine and system pressure control, switching at 0.50 bar ± 0.10 bar and operating across 0 to 12 bar. Built with an M10 x 1 conical short thread (11 mm thread length) and a 27 mm hex housing, it supports oil, fuel, and air pressure circuits and provides a single-pole common-ground signal that closes as pressure falls, making it a dependable choice for VDO engine monitoring installations.
|
$ 139.89
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-005-001C oil pressure switch is a 1.00 bar monitoring device for engine and system protection in automotive and industrial applications. Designed for VDO engine monitoring setups, it uses an M10 x 1 tapered short thread for secure installation and provides a switching signal that closes as pressure falls, helping trigger warning circuits reliably across 6–24 V DC systems.
|
$ 183.94
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-005-003C pressure switch is a robust monitoring device for engine and system pressure control, switching at 1.80 bar (±0.20 bar) with a contact that closes as pressure falls. Built for industrial and automotive use, it features an M10 x 1 male tapered short thread for secure installation, a 2-pole insulated return signal, and operation on 6–24 V DC with up to 5 W non-inductive switching capacity for dependable warning and protection circuits.
|
$ 228.95
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-005-004C pressure switching sensor is a 3.00 bar unit for vehicle engine monitoring that helps protect critical systems by triggering a warning/logic signal when pressure drops. Built with an M10 x 1 male tapered short thread and a 2-pole insulated return design, it closes the contact as pressure falls below the switchpoint, supporting dependable control and indication in oil, fuel, or air pressure circuits across 6–24 V DC installations.
|
$ 257.29
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-005-005C pressure switch is a durable 0.80 bar switchpoint device for hydraulic and engine monitoring systems, designed to trigger a warning or control circuit as pressure falls. With an M10 x 1 male tapered short thread for secure installation and a 2-pole insulated return design, it provides dependable pressure supervision for media such as oil, fuel, and air across 6–24 V DC electrical systems.
|
$ 179.52
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-005-006C pressure monitoring switch is a compact 0.50 bar unit built for dependable control and warning functions in engine monitoring and other automotive or industrial pressure circuits. Using an M10 x 1 tapered short male thread for secure installation, it closes the contact as pressure falls, helping protect critical systems that operate with oil, fuel, or air.
|
$ 179.71
-
+
| ||
|
1-2 weeks delivery time The VDO 230-112-005-011C engine-monitoring pressure switch is a precision 1.50 bar unit designed to trigger a warning signal when pressure drops below the switchpoint, supporting dependable protection of oil, fuel, or air systems. Built for demanding automotive and industrial use, it combines an M10 x 1 male tapered thread for straightforward installation with a dual-pole insulated return, slow contact response, and stable operation across –25 °C to +120 °C, while handling 0–12 bar operating pressure and up to 30 bar briefly.
|
$ 228.95
-
+
| ||
|
1-2 weeks delivery time The VDO 230-213-001-011C pressure switch is a 12.00 bar switching device for pressure monitoring and control in automotive, industrial, and VDO engine monitoring applications. With a 1/8-27 NPTF male thread and a common-ground, single-pole switching signal (contact closes as pressure falls), it supports dependable warning and protection logic for systems using oil, fuel, or air as the pressure medium.
|
$ 186.64
-
+
| ||
|
1-2 weeks delivery time The VDO 230-213-002-001C pressure monitoring switch is a 7 bar control device with a Bosch connection designed to protect pressure-sensitive systems by switching when pressure drops. Built with a 1/8-27 NPTF thread for secure installation, it closes the contact when pressure falls and supports dependable control in fuel, oil, coolant, and hydraulic circuits across automotive, industrial, and marine applications, with rugged IP67 sealing and a 2-pole insulated return design for safe operation.
|
$ 209.43
-
+
| ||
|
1-2 weeks delivery time The VDO 230-213-002-003C pressure switch is a robust 10.50 bar monitoring component for control and engine monitoring systems, using a 1/8-27 NPTF male thread for secure installation. With a dual-pole insulated return and a switching function where the contact closes as pressure falls below 10.50 bar, it helps deliver dependable pressure warning and control logic in automotive and industrial applications while supporting 6–24 V DC electrical systems.
|
$ 232.13
-
+
| ||
|
1-2 weeks delivery time The VDO 230-213-002-004C pressure switch is a robust engine-monitoring switch for oil, fuel, and air systems, providing a 4.50 Bar switchpoint (±0.30 Bar) to trigger a warning circuit when pressure drops. Built for demanding installations, it supports 6–24 V DC electrical systems, uses an M10 x 1 conical tapered thread for secure mounting, and operates reliably across –25 °C to +120 °C with a sealed, unvented round contact chamber.
|
$ 280.91
-
+
| ||
|
1-2 weeks delivery time The VDO 232-011-005-003D 90°C temperature switch is a precision thermal switching device for automotive engine monitoring and temperature control systems, designed to close its contact as temperature rises beyond the set point. With an M10 x 1.5 threaded body for secure installation and a single-pole common-ground signal, it helps control temperature-dependent functions and supports stable engine operating conditions across a wide 6–24 V DC electrical environment.
|
$ 247.39
-
+
| ||
What types of VDO Instruments And Parts do you have in your catalog?
VDO Gauges, VDO Oil Pressure Gauges, VDO Fuel Gauges, VDO Boost Gauges, VDO Temperature Gauges, , VDO Tachometers, VDO Volt Gauges, VDO Gas Gauges, VDO Speedometers, VDO Oil Pressure Senders, VDO Fuel Sending Units, VDO TPMS Sensors