BEP Marine offers a comprehensive range of marine electrical products, including battery switches, VSR (Voltage Sensitive Relays), switch panels, and remote-operated battery switches. These products are designed to enhance the electrical systems of boats and yachts. The BEP Marine battery switch allows users to control power distribution, isolate batteries, and prevent electrical drain when the vessel is not in use. VSRs facilitate automatic charging and isolation of multiple battery banks, ensuring optimal battery health. The BEP Marine switch panels provide organized control for various onboard systems. These products collectively contribute to efficient energy management and improved safety on marine vessels.
|
1-2 weeks delivery time The BEP CG2-2W-F-W is a Contour Generation II Spray Proof switch panel in white, configured with 2 switches and 1 fuse. It can be mounted vertically or horizontally and features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear cover with rubber over-mold for flexible front operation and a clear label window for label backlighting. The panel includes a replaceable clip-on contour wave, concealed mounting screws, backlit LEDs, and sealing features designed to create a watertight seal against the mounting surface. The installed switches are rated at 16A DC.
|
$ 183.46
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-2W-W is a Contour Generation II Spray Proof switch panel in white, supplied in a 2-switch configuration with no fuses. It can be mounted vertically or horizontally and features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear cover with rubber over-mold for flexible front operation and a clear label window for label backlighting. The panel includes a replaceable clip-on contour wave, concealed mounting screws, backlit LEDs, and sealing features designed to create a watertight seal against the mounting surface. The installed switches are rated at 16A DC.
|
$ 191.72
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-4W is a Contour Generation II Spray Proof switch panel supplied in a 4-switch configuration with no fuses. It can be mounted vertically or horizontally and features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear molded cover with a rubber over-mold for flexible front operation and a clear label window for label backlighting. The panel includes a replaceable clip-on contour wave, concealed mounting screws, backlit LEDs, and sealing features designed to create a watertight seal with the switch cover and against the mounting surface. The installed switches are rated at 16A DC.
|
$ 124.58
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-4W-F is a Contour Generation II Spray Proof DC switch panel supplied in a 4-switch configuration with fuses. It can be mounted vertically or horizontally and features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear molded cover with a rubber over-mold that allows flexible front switch operation and provides a clear label window for label backlighting. The panel includes a replaceable clip-on contour wave, concealed mounting screws, backlit LEDs, and watertight sealing features designed for marine installations. The installed switches are rated at 16A DC.
|
$ 154.67
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-4W-F-W is a Contour Generation II Spray Proof DC switch panel in a 4-switch configuration with fuses and a white finish. It can be installed vertically or horizontally and is built with a molded plastic switch tray featuring an integrated rubber gasket and seal, plus a clear molded cover with a rubber over-mold to allow flexible front switch operation while providing a clear label window for label backlighting. The panel includes a replaceable clip-on contour wave, concealed mounting screws, backlit LEDs, and watertight sealing features designed for marine environments. The installed switches are rated at 16A DC.
|
$ 204.67
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-4W-W is a Contour Generation II Spray Proof DC switch panel in a 4-switch configuration with no fuses, finished in white. The panel can be mounted vertically or horizontally and features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear molded cover with a rubber over-mold that allows flexible front switch operation while providing a clear window for label backlighting. It includes a replaceable clip-on contour wave, concealed mounting screws, backlit LEDs, and watertight sealing features for marine environments. The installed switches are rated at 16A DC.
|
$ 151.94
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-6W is a Contour Generation II Spray Proof switch panel supplied with 6 On/Off switches in a charcoal finish and a no-fuse configuration. It features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear molded cover with a rubber over-mold that allows flexible switch operation through the front of the panel while providing a clear window for label backlighting. The panel can be mounted vertically or horizontally, includes backlit LEDs, concealed mounting screws, and a replaceable clip-on contour wave. The installed switches are rated at 16A DC, and the panel is supplied standard with the SET-G2-1 label set.
|
$ 154.28
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-6W-F is a Contour Generation II Spray Proof switch panel in charcoal, supplied in a 6-way configuration with fuses included. It features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear molded cover with a rubber over-mold for flexible switch operation while maintaining a clear window for label backlighting. The panel supports vertical or horizontal mounting, includes backlit LEDs, concealed mounting screws, and a replaceable clip-on contour wave. The installed switches are rated at 16A DC, and the panel is supplied standard with the SET-G2-1 label set.
|
$ 158.60
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-6W-F-W is a Contour Generation II Spray Proof marine switch panel in white, supplied in a 6-way configuration with fuses included and 6x On/Off switches rated at 16A DC. It supports vertical or horizontal mounting with labels readable in either orientation, and features a molded plastic switch tray with an integrated rubber gasket and seal, plus a clear molded cover with rubber over-mold for flexible front operation and a clear window for label backlighting. The panel includes backlit LEDs, concealed mounting screws, a replaceable clip-on contour wave, and is supplied standard with the SET-G2-1 label set.
|
$ 175.66
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-6W-W is a Contour Generation II Spray Proof switch panel designed for marine electrical control, supplied in a 6-way configuration with a white finish and MC10 connector for installation and wiring. This panel is a no-fuse version, providing a practical switching solution for boat and watercraft dashboards where a spray-resistant panel is required.
|
$ 154.60
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-6W6F/B is a Contour Generation II Spray Proof DC switch panel designed for marine electrical systems, supplied with 6 switches and integrated circuit breakers for controlled and protected onboard power distribution. Built for reliable operation in harsh marine environments, this panel provides a practical helm or console solution for managing multiple DC circuits on boats and watercraft.
|
$ 176.75
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-JB is a panel joiner for the Contour Generation II Spray Proof switch panel range, designed for multiple panel installations. It allows Contour Gen II panels to be joined together in a clean and secure layout, supporting modular installations where more than one switch panel is required.
|
$ 37.59
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-05 is a CLB Series push reset thermal circuit breaker rated at 5A, designed for reliable overcurrent protection in marine / ignition-protected applications. It supports an interrupting capacity of 2500A, is rated within the series range of 200A @ 250V AC interrupt capacity, and operates in a temperature range of 14–140°F (-10–60°C).
|
$ 9.20
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-07 is a CLB Series push reset thermal circuit breaker rated at 7A, designed for dependable overcurrent protection in marine / ignition-protected electrical systems. It features a manual push-to-reset function, supports an interrupting capacity of 2500A, and operates within an operating temperature range of 14–140°F (-10–60°C).
|
$ 15.60
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-10 is a CLB Series push reset thermal circuit breaker rated at 10A, designed for reliable overcurrent protection in marine / ignition-protected electrical systems. It features a manual push-to-reset function, supports an interrupting capacity of 2500A, and operates within an operating temperature range of 14–140°F (-10–60°C). The CLB Series is rated 5–40A and offers 200A @ 250V AC interrupt capacity.
|
$ 10.06
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-10/DSP is a CLB Series push reset thermal circuit breaker rated at 10A, designed for dependable overcurrent protection in marine / ignition-protected applications. This DSP version includes the circuit breaker, PMCC-10 washer, and CLB-BOOT boot, providing a complete installation set. It features a manual push-to-reset function, supports an interrupting capacity of 2500A, and operates within 14–140°F (-10–60°C).
|
$ 24.11
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-15 is a CLB Series push reset thermal circuit breaker rated at 15A, designed for reliable circuit protection in marine / ignition-protected applications. It is rated 200A @ 250V AC interrupt capacity, features an interrupting capacity of 2500A, and provides a resettable overload capacity of 10x the rated current. Operating temperature range is 14–140°F (-10–60°C).
|
$ 9.20
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-15/DSP is a CLB Series push reset thermal circuit breaker rated at 15A, designed for reliable overcurrent protection in marine / ignition-protected applications. This DSP version includes the circuit breaker, PMCC-10 washer, and CLB-BOOT boot, providing a complete installation set. It features a manual push-to-reset function, offers an interrupting capacity of 2500A, and supports an operating temperature range of 14–140°F (-10–60°C) with a resettable overload capacity of 10x the rated current.
|
$ 23.32
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-20 is a CLB Series push reset thermal circuit breaker rated at 20A, designed for durable overcurrent protection in marine / ignition-protected electrical systems. It features a manual push-to-reset mechanism, an interrupting capacity of 2500A, and operates within 14–140°F (-10–60°C). The CLB Series covers 5–40A ratings and provides 200A @ 250V AC interrupt capacity, with a resettable overload capacity of 10x rated current and approvals including UL, cUL, TUV, CE, UL1500, and ISO8846.
|
$ 9.20
-
+
| ||
|
1-2 weeks delivery time The BEP CLB-25 is a CLB Series push reset thermal circuit breaker rated at 25A, designed for dependable overcurrent protection in marine / ignition-protected electrical systems. It is rated 200A @ 250V AC interrupt capacity, features an interrupting capacity of 2500A, and provides a resettable overload capacity of 10x the rated current. Operating temperature range is 14–140°F (-10–60°C).
|
$ 9.20
-
+
| ||
What is the function of a BEP Marine battery switch and how does it contribute to efficient power management on boats and yachts?
A BEP Marine battery switch serves as a vital component for power management on boats and yachts. It allows users to control the connection between the battery and onboard systems, helping to prevent unnecessary battery drain during periods of inactivity. This contributes to efficient power utilization, extends battery life, and enhances safety. The BEP Marine Battery Switch, in conjunction with other products like VSRs (Voltage Sensitive Relays) and switch panels, provides boat owners with the ability to manage and distribute power effectively, ensuring optimal performance of electrical systems while maintaining a reliable power supply for various onboard equipment.
How does a BEP Marine VSR (Voltage Sensitive Relay) enhance battery charging and maintenance across multiple battery banks?
A BEP Marine VSR (Voltage Sensitive Relay) plays a crucial role in optimizing battery charging and maintenance across multiple battery banks on boats and yachts. This intelligent relay automatically detects the voltage levels of different battery banks and connects them for charging when the main engine is running or an external charging source is active. This enhances battery performance and extends their lifespan by ensuring that all batteries receive an appropriate charge without overloading or undercharging, thereby contributing to efficient energy distribution and reliable power supply on marine vessels.
For secure installation and durable storage, pair this kit with a reliable Marine Battery Box.
In what scenarios is the BEP Marine 701 MD commonly utilized, and what specific features does it offer for marine applications?
The BEP Marine 701 MD is commonly employed in scenarios requiring reliable battery monitoring and management on boats and yachts. This advanced module offers features like voltage, current, and temperature sensing, making it a valuable tool for assessing battery health and performance. It aids in preventing battery overdischarge and overheating, ensuring optimal battery conditions and contributing to safer and more efficient marine operations.