BEP Marine offers a comprehensive range of marine electrical products, including battery switches, VSR (Voltage Sensitive Relays), switch panels, and remote-operated battery switches. These products are designed to enhance the electrical systems of boats and yachts. The BEP Marine battery switch allows users to control power distribution, isolate batteries, and prevent electrical drain when the vessel is not in use. VSRs facilitate automatic charging and isolation of multiple battery banks, ensuring optimal battery health. The BEP Marine switch panels provide organized control for various onboard systems. These products collectively contribute to efficient energy management and improved safety on marine vessels.
|
1-2 weeks delivery time The BEP CBS-30A-DP is a compact IEG hydraulic magnetic circuit breaker rated at 30A with a double pole (DP) configuration, designed to provide reliable circuit protection and accurate circuit control in demanding electrical systems. It features trip-free operation (trips under overload even if the handle is held ON) and is compatible with BEP panels, making it suitable for marine and other precision applications where dependable performance is required.
|
$ 98.28
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-30A-DP-TC230 is an IEG hydraulic magnetic circuit breaker rated at 30A with a double pole (DP) configuration and triple coil (TC230) design for 230V applications. It provides reliable circuit protection and accurate circuit control, featuring trip-free operation that trips under overload even when the handle is held in the ON position. Designed for precision-demanding environments, it is compatible with BEP panels and supports a wide range of professional electrical installations.
|
$ 156.62
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-30A-SP is an IEG hydraulic magnetic circuit breaker rated at 30A with a single pole (SP) configuration, designed for reliable circuit protection and accurate circuit control in demanding applications. It features trip-free operation, meaning the circuit will trip under overload conditions even if the handle is held in the ON position. Suitable for environments where precision and stable performance are required, this breaker is compatible with BEP panels and supports professional marine and technical electrical installations.
|
$ 39.86
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-30A-TP is an IEG hydraulic magnetic circuit breaker rated at 30A in a triple pole (TP) configuration, designed for reliable circuit protection and accurate circuit control in demanding electrical installations. It features trip-free operation, ensuring the circuit trips during overload even if the handle is held in the ON position. Built for consistent performance across different conditions, this breaker is compatible with BEP panels and suitable for precision-focused marine and technical equipment applications.
|
$ 134.47
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-40A-DP is an IEG hydraulic magnetic circuit breaker rated at 40A with a double pole (DP) configuration, designed for reliable circuit protection and accurate circuit control in demanding electrical installations. It features trip-free operation, ensuring the circuit trips during an overload even if the handle is held in the ON position. Suitable for precision-focused marine and technical applications, this breaker is compatible with BEP panels and provides consistent performance where dependable protection is required.
|
$ 109.60
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-40A-SP is an IEG hydraulic magnetic circuit breaker rated at 40A with a single pole (SP) configuration, designed for reliable circuit protection and accurate circuit control in demanding electrical systems. It features a trip-free action, meaning it will trip during an overload even if the handle is held in the ON position. Suitable for marine and other precision-critical applications, this breaker is compatible with BEP panels and provides stable protection where dependable performance is required.
|
$ 39.86
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-50A-DP is an IEG hydraulic magnetic circuit breaker rated at 50A with a double pole (DP) configuration, designed to deliver reliable circuit protection and accurate circuit control for demanding electrical systems. It features a trip-free action, meaning it will trip during an overload even if the handle is held in the ON position. Built for precision-critical environments including marine applications, the CBS-50A-DP is compatible with BEP panels and provides dependable performance for professional electrical installations.
|
$ 109.60
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-50A-SP-IGP is an IEG hydraulic magnetic circuit breaker rated at 50A with a single pole (SP) configuration and Ignition Protected (IGP) design for marine electrical safety. It provides reliable circuit protection and accurate circuit control, featuring a trip-free action that trips during overload even if the handle is held in the ON position. Designed for precision applications and compatible with BEP panels, this breaker is a dependable choice for professional installations where ignition protection is required.
|
$ 39.86
-
+
| ||
|
1-2 weeks delivery time The BEP CBS-5A-SP is an IEG hydraulic magnetic circuit breaker with a 5A rating and single pole (SP) configuration, designed to provide reliable circuit protection and accurate circuit control for equipment in the international market place. It features a trip-free action, meaning the circuit will trip during an overload even if the handle is held in the ON position. The CBS-5A-SP is compatible with BEP panels and is well-suited for precision electrical applications where consistent performance is required.
|
$ 39.86
-
+
| ||
|
1-2 weeks delivery time The BEP CC-1 is a Contour Connect module plate with 2 holes, designed to house compatible BEP components within a modular panel system. The CC-1 module can be used to mount 701-PM panel mount battery on/off switches, 701S-PM panel mount battery selector switches, 185 Series heavy-duty circuit breakers (requires CC-HDBM, one per breaker), and the 710-140A Voltage Sensitive Relay (VSR), providing a clean and consistent installation layout.
|
$ 74.81
-
+
| ||
|
1-2 weeks delivery time The BEP CC-2 is a Contour Connect module plate with a single main hole and CB (circuit breaker) combo cutout, designed to house Carling circuit breakers within a modular panel layout. It supports CBL series push reset Carling circuit breakers and Toggle Magnetic Hydraulic Carling circuit breakers, providing a clean, standardized installation solution for compatible breaker configurations.
|
$ 118.05
-
+
| ||
|
1-2 weeks delivery time The BEP CC-5 is a Contour Connect 3-hole module plate designed to house multiple compatible BEP components in a clean modular layout. It supports 701-PM panel mount battery on/off switches, 701S-PM panel mount battery selector switches, 185 Series heavy-duty circuit breakers (requires CC-HDBM ordered with 185 Series breakers, one per breaker), and the 710-140A Voltage Sensitive Relay (VSR), making it a practical solution for structured battery management and circuit protection installations.
|
$ 121.69
-
+
| ||
|
1-2 weeks delivery time The BEP CC-802 is a battery distribution panel designed for a single engine installation with two battery banks. It is supplied loosely assembled with links and joiners, allowing installation in either a vertical or horizontal orientation, with full wiring instructions provided for pre-assembly in both layouts. The panel includes 2 battery switches, 1 emergency parallel switch, and a digital voltage sensitive relay.
|
$ 432.87
-
+
| ||
|
1-2 weeks delivery time The BEP CC-803N is a Contour Connect battery distribution panel for a twin engine, three battery banks setup. It is supplied with cables to allow horizontal or vertical configurations, and the components can be removed and reconfigured if the factory layout does not suit the application. Module dimensions: 9.2" x 8.3" x 2.2" (223 x 212 x 55 mm).
|
$ 831.50
-
+
| ||
|
1-2 weeks delivery time The BEP CC-804 is a Contour Connect 5-way CB panel with 1x heavy-duty circuit breaker, 1x toggle, and 3x push reset breakers, designed to cover essential circuit requirements such as bilge and pumps. It includes a 50A CB for DC mains or treatment systems, a 135A 185 Series CB for an anchor windlass, and 3 x 10A push-to-reset thermal breakers. The panel complements other modules for single or dual engine installations, and custom configurations can be supplied to order.
|
$ 434.15
-
+
| ||
|
1-2 weeks delivery time The BEP CC-810 is a Contour Connect battery switch panel for a single engine / two battery banks setup, supplied standard with 3 x 701-PM battery switches pre-assembled. It is designed for easy installation and is ideal for fitting alongside any other Contour Connect Modules. Part # CC-810.
|
$ 267.76
-
+
| ||
|
1-2 weeks delivery time The BEP CC-BLANK is a Contour Connect blanking plate designed to cover an unused hole in CC-1 and CC-2 panels. It is attached from the rear of the panel, allowing the installation to remain clean and enabling future expansion with other options when required. Part # CC-BLANK.
|
$ 112.56
-
+
| ||
|
1-2 weeks delivery time The BEP CC-HDBM is a Contour Connect CB panel mount module designed for installing BEP 184 & 185 Series circuit breakers. The CC-HDBM must be ordered separately when ordering BEP 184 & 185 Series circuit breakers. Mounting hardware for the circuit breaker and panel attachment is supplied with the module.
|
$ 50.10
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-2W is a Contour Generation II Spray Proof switch panel supplied in charcoal and configured with 2 on/off switches in a compact module that can be mounted vertically or horizontally. It features a molded switch tray with an integrated gasket and a flexible clear cover with rubber over-mold to operate switches through the front, while maintaining a clear label window with backlit LEDs. The panel uses a replaceable clip-on contour wave, has concealed mounting screws, and the switches are rated at 16A DC. Supplied standard with label set SET-G2-1.
|
$ 97.27
-
+
| ||
|
1-2 weeks delivery time The BEP CG2-2W-F is a Contour Generation II Spray Proof switch panel in charcoal, configured with 2 switches and 1 fuse. It is designed for flexible installation and can be mounted vertically or horizontally. The panel features a molded switch tray with an integrated rubber gasket and a flexible clear cover with rubber over-mold, allowing switch operation through the front while providing a clear label window with backlit LEDs. It includes a replaceable clip-on contour wave, concealed mounting screws, and switches rated at 16A DC. Supplied standard with label set SET-G2-1.
|
$ 130.18
-
+
| ||
What is the function of a BEP Marine battery switch and how does it contribute to efficient power management on boats and yachts?
A BEP Marine battery switch serves as a vital component for power management on boats and yachts. It allows users to control the connection between the battery and onboard systems, helping to prevent unnecessary battery drain during periods of inactivity. This contributes to efficient power utilization, extends battery life, and enhances safety. The BEP Marine Battery Switch, in conjunction with other products like VSRs (Voltage Sensitive Relays) and switch panels, provides boat owners with the ability to manage and distribute power effectively, ensuring optimal performance of electrical systems while maintaining a reliable power supply for various onboard equipment.
How does a BEP Marine VSR (Voltage Sensitive Relay) enhance battery charging and maintenance across multiple battery banks?
A BEP Marine VSR (Voltage Sensitive Relay) plays a crucial role in optimizing battery charging and maintenance across multiple battery banks on boats and yachts. This intelligent relay automatically detects the voltage levels of different battery banks and connects them for charging when the main engine is running or an external charging source is active. This enhances battery performance and extends their lifespan by ensuring that all batteries receive an appropriate charge without overloading or undercharging, thereby contributing to efficient energy distribution and reliable power supply on marine vessels.
For secure installation and durable storage, pair this kit with a reliable Marine Battery Box.
In what scenarios is the BEP Marine 701 MD commonly utilized, and what specific features does it offer for marine applications?
The BEP Marine 701 MD is commonly employed in scenarios requiring reliable battery monitoring and management on boats and yachts. This advanced module offers features like voltage, current, and temperature sensing, making it a valuable tool for assessing battery health and performance. It aids in preventing battery overdischarge and overheating, ensuring optimal battery conditions and contributing to safer and more efficient marine operations.