BEP Marine offers a comprehensive range of marine electrical products, including battery switches, VSR (Voltage Sensitive Relays), switch panels, and remote-operated battery switches. These products are designed to enhance the electrical systems of boats and yachts. The BEP Marine battery switch allows users to control power distribution, isolate batteries, and prevent electrical drain when the vessel is not in use. VSRs facilitate automatic charging and isolation of multiple battery banks, ensuring optimal battery health. The BEP Marine switch panels provide organized control for various onboard systems. These products collectively contribute to efficient energy management and improved safety on marine vessels.
|
1-2 weeks delivery time The BEP SW-32124 is a double pole (DPST) toggle switch with Off-On operation, rated 12V DC and 10A. It switches two independent circuits simultaneously and is designed for panel mounting in marine and vehicle electrical systems.
|
$ 10.53
-
+
| ||
|
1-2 weeks delivery time The BEP SW-6064B3P is a replacement operational switch for Contour 1100 Series panels with On/On (On/Off) function. Designed as a plug-in alternative switch module for Contour panels, it enables different switching logic without replacing the full panel assembly.
|
$ 5.43
-
+
| ||
|
1-2 weeks delivery time The BEP SW-CG1 is an On/Off spare switch module for Contour Generation II panels. Designed as a direct replacement switch, it restores or changes switch function without replacing the full panel assembly.
|
$ 4.52
-
+
| ||
|
1-2 weeks delivery time The BEP SW-CG2 is an On/Off momentary spare switch module for Contour Generation II panels. Designed as a direct replacement insert, it provides spring-return momentary On/Off operation for compatible BEP switch panels.
|
$ 20.59
-
+
| ||
|
1-2 weeks delivery time The BEP SW-CG3 is an On/Off/On spare switch module for Contour Generation II panels. It is designed as a direct replacement insert and provides three-position On/Off/On switching for compatible BEP panel systems.
|
$ 4.69
-
+
| ||
|
1-2 weeks delivery time The BEP SW-CG4 is a spare rocker switch for Contour Generation II panels with Momentary On/Off/Momentary On operation. It is designed as a direct replacement module for compatible BEP CG2 switch panels.
|
$ 35.57
-
+
| ||
|
1-2 weeks delivery time The BEP SW-M331 is a splash-proof boot cover for toggle switches. It is designed to protect the switch bushing and actuator from moisture and spray in marine and vehicle panels.
|
$ 2.91
-
+
| ||
|
1-2 weeks delivery time The BEP SW-RVS2 is an ON/OFF replacement switch for Contour Int 1000 Series panels and modules. Designed as a direct spare switch for panel integration and standard replacement use.
|
$ 10.77
-
+
| ||
|
1-2 weeks delivery time The BEP TB-118-10P is a 30A terminal block with 10 isolated connections for AC and DC panel wiring. Phenolic base construction with 6.3 mm (0.25") screw terminals. Rated to 300V AC/DC.
|
$ 11.64
-
+
| ||
|
1-2 weeks delivery time The BEP TB-118-6P is a 30A terminal block with 6 isolated connections for AC and DC panel wiring. Phenolic base with 6.3 mm (0.25") screw terminals. Rated up to 300V AC/DC.
|
$ 8.03
-
+
| ||
|
1-2 weeks delivery time The BEP TB-118-6P/DSP is a 30A terminal block with 6 isolated connections and 6.3 mm screw terminals for AC and DC panel wiring. Phenolic base construction. Rated to 300V AC/DC.
|
$ 29.56
-
+
| ||
|
1-2 weeks delivery time The BEP TS1 is an ultrasonic tank sender with no moving parts for tanks up to 2000 mm depth. Supports 240–33 Ω, 10–180 Ω, Vetus 10–300 Ω and 0–5V outputs. SAE 5-hole mount, 10–32V supply, 2 mm accuracy.
|
$ 261.99
-
+
| ||
|
1-2 weeks delivery time The BEP TS1-PK is a programming kit for the TS1 ultrasonic tank sender, enabling configuration for tank shape, size and fluid type via USB and Windows software. Stores calibrated parameters directly in TS1 non-volatile memory.
|
$ 244.48
-
+
| ||
|
1-2 weeks delivery time The BEP TSSMF-60-100N is a side-mount probe type fuel tank sender with 0–5V output for electronic monitoring systems. Designed for fuel level measurement with voltage signal output and side mounting installation.
|
$ 433.53
-
+
| ||
|
1-2 weeks delivery time The BEP TSSMW-60-100N is a side-mount water tank sender with probe design for tank depths 600–1000 mm and 0–5V output. Designed for voltage-input monitoring systems and marine water tank level measurement.
|
$ 433.53
-
+
| ||
|
1-2 weeks delivery time The BEP TSTMF-60-100N is a top-mount fuel tank sender with probe design for tank depths 600–1000 mm and 0–5V output. Designed for voltage-input fuel monitoring systems and marine fuel tank level measurement.
|
$ 384.23
-
+
| ||
|
1-2 weeks delivery time The BEP TSTMW-60-100N is a top-mount probe type water tank sender for tank depths 600–1000 mm with 0–5V output. Designed for electronic tank monitoring systems and accurate onboard water level measurement.
|
$ 403.42
-
+
| ||
|
1-2 weeks delivery time The BEP VR2-24V is a 24V LPG regulator and solenoid valve kit for marine gas systems. Combines pressure regulation and electric shutoff control for onboard propane appliances.
|
$ 414.50
-
+
| ||
|
1-2 weeks delivery time The BEP WAFH-14 is an inline waterproof ATC fuse holder with wire tails for marine DC circuits. Supplied with a 15A ATC fuse and approx. 5 inch lead length for in-line cable protection.
|
$ 7.73
-
+
| ||
What is the function of a BEP Marine battery switch and how does it contribute to efficient power management on boats and yachts?
A BEP Marine battery switch serves as a vital component for power management on boats and yachts. It allows users to control the connection between the battery and onboard systems, helping to prevent unnecessary battery drain during periods of inactivity. This contributes to efficient power utilization, extends battery life, and enhances safety. The BEP Marine Battery Switch, in conjunction with other products like VSRs (Voltage Sensitive Relays) and switch panels, provides boat owners with the ability to manage and distribute power effectively, ensuring optimal performance of electrical systems while maintaining a reliable power supply for various onboard equipment.
How does a BEP Marine VSR (Voltage Sensitive Relay) enhance battery charging and maintenance across multiple battery banks?
A BEP Marine VSR (Voltage Sensitive Relay) plays a crucial role in optimizing battery charging and maintenance across multiple battery banks on boats and yachts. This intelligent relay automatically detects the voltage levels of different battery banks and connects them for charging when the main engine is running or an external charging source is active. This enhances battery performance and extends their lifespan by ensuring that all batteries receive an appropriate charge without overloading or undercharging, thereby contributing to efficient energy distribution and reliable power supply on marine vessels.
For secure installation and durable storage, pair this kit with a reliable Marine Battery Box.
In what scenarios is the BEP Marine 701 MD commonly utilized, and what specific features does it offer for marine applications?
The BEP Marine 701 MD is commonly employed in scenarios requiring reliable battery monitoring and management on boats and yachts. This advanced module offers features like voltage, current, and temperature sensing, making it a valuable tool for assessing battery health and performance. It aids in preventing battery overdischarge and overheating, ensuring optimal battery conditions and contributing to safer and more efficient marine operations.