|
1-2 weeks delivery time The Osculati 41.117.22 handrail support is designed for 22×1.2 mm tubing and features a 16° angled base. The stainless steel support provides a dedicated mounting point for handrail installations where an inclined base configuration is required.
|
$ 14.24
-
+
| ||
|
1-2 weeks delivery time The Osculati tapered handrail bracket is manufactured from AISI 316 stainless steel and features a tapered shape with no dangerous protruding parts. Terminal and central versions are available for Ø22 mm and Ø25 mm handrail tubes. All variants have a height of 64 mm: articles 41.663.51 and 41.663.61 are terminal brackets, while 41.663.52 and 41.663.62 are central supports.
|
$ 19.42
Type:
Diameter, mm:
| ||
|
1-2 weeks delivery time The Osculati shaped handrail bracket is made from chromed brass and features a modern, practical design for Ø22 mm handrail tubing. Two versions are available: article 41.611.00 as a terminal bracket with stud mounting, and article 41.612.00 as a central bracket with bores for screws.
|
$ 39.64
Type:
| ||
|
1-2 weeks delivery time The Osculati handrail bracket with rectangular base plate is made from chromed brass with a large-section design for Ø22 mm handrail tubing. Both versions have a height of 64 mm and are sold in pairs with right + left boring. Article 41.040.00 is the terminal version, while article 41.041.00 is designed as a central handrail support.
|
$ 32.50
Type:
| ||
|
1-2 weeks delivery time The Osculati rounded handrail fitting is made from mirror-polished stainless steel and is available in terminal and central versions for Ø22 mm and Ø25 mm handrail tubes. All four variants have a Ø35 mm base, 57 mm height and use 8 mm studs. Optional stud bolts and nuts are available under Osculati code 40.142.08.
|
$ 18.30
Type:
Diameter, mm:
| ||
|
1-2 weeks delivery time The Osculati handrail support for upper fastening is made from anodized aluminium and consists of two parts: the lower section is fixed with self-tapping screws and the upper section overlaps it. This design is intended for installations where studs cannot be fastened from the inside. Two versions are available: article 41.608.10 as a terminal support and article 41.609.10 as a central support. Both have a Ø50 mm diameter, 60 mm height, optional tube 41.610.00, optional studs and bolts 40.142.08, and use 8 mm studs.
|
$ 57.08
Type:
| ||
|
1-2 weeks delivery time The Osculati handrail support with hidden screws is made from polished anodized aluminium and designed for 40×20 mm tubing. Two versions are available: article 41.608.00 as a terminal fitting and article 41.609.00 as a central support. Both versions have a Ø50 mm base, 60 mm height, use 8 mm studs, and are compatible with optional tube 41.610.00 and optional studs and bolts 40.142.08.
|
$ 49.49
Type:
| ||
|
1-2 weeks delivery time The Osculati 41.610.00 is a polished and anodized aluminium oval tube for handrail installations. The tube has a 40x20 mm oval profile and is supplied as a 2-metre bar. It is designed to be inserted into Osculati handrails 41.608.00 and 41.609.00.
|
$ 67.21
-
+
| ||
|
1-2 weeks delivery time The Osculati stainless steel tube range is designed for marine pulpit, railing and stanchion installations. Made of mirror-polished AISI 316 stainless steel, the tubes are available in 20x1 mm, 22x1.2 mm, 25x1.2 mm and 30x1.5 mm sizes, with bar lengths of 2 m, 3 m or 6 m. Each diameter and length combination has an individual Osculati article number.
|
$ 52.97
Length, m:
| ||
|
1-2 weeks delivery time The Osculati tube range is made of anodized light alloy and is available in six diameter and wall-thickness combinations: 20x1 mm, 22x1.2 mm, 25x1.5 mm, 30x1 mm, 35x1 mm and 60x1.5 mm. Each size is offered in 2 m, 3 m and 6 m bar lengths, providing 18 article variants. The 2 m version of the 60x1.5 mm tube, article 41.035.00, features a RAL 9003 white coating.
|
$ 21.73
Length, m:
| ||
|
1-2 weeks delivery time The Osculati tube end cap is made of polished chromed ABS and is designed as a terminal fitting for round tubes. Two versions are available: article 41.210.07 for Ø22 mm tubes and article 41.210.01 for Ø25 mm tubes.
|
$ 1.92
Diameter, mm:
| ||
|
1-2 weeks delivery time The FNI 2929812 handrail terminal is part of the stainless steel pulpit joints and bases range and is designed for Ø22 mm handrail tubing. Made of mirror-polished AISI 316 stainless steel and machined from solid material, the terminal measures 30 mm in diameter (A) and 65 mm in height (H). It is secured using an 8 mm hanger bolt.
|
$ 27.59
-
+
| ||
|
1-2 weeks delivery time The FNI handrail terminal range is part of the stainless steel pulpit joints and bases series and is machined from solid AISI 316 stainless steel. Designed for Ø25 mm handrail tubes, the terminals allow fastening with a single screw where bolt installation is not possible. Three configurations are available — Right, Left and Central — all with a 35 mm overall diameter (A) and 65 mm height (H).
|
$ 60.08
Type:
| ||
|
1-2 weeks delivery time The FNI handrail terminal is part of the stainless steel pulpit joints and bases range and is designed for Ø22 mm or Ø25 mm handrail tubing. Made of AISI 316 stainless steel, the terminal features a 60° angled mounting configuration and a base with two fixing holes. The Ø22 mm version measures A 40 mm, B 26 mm and H 38 mm, while the Ø25 mm version measures A 42 mm, B 29 mm and H 38 mm.
|
$ 9.51
Diameter, mm:
| ||
|
1-2 weeks delivery time The FNI central handrail bracket is part of the stainless steel pulpit joints and bases range and is designed as an intermediate support for Ø22 mm or Ø25 mm handrail tubing. Made of AISI 316 stainless steel, it features a 60° angled support and a two-hole mounting base. The Ø22 mm version measures A 40 mm, B 26 mm and H 38 mm, while the Ø25 mm version measures A 42 mm, B 29 mm and H 38 mm.
|
$ 8.33
Diameter, mm:
| ||
|
1-2 weeks delivery time The FNI central handrail bracket is part of the stainless steel pulpit joints and bases range and is designed to support Ø22 mm or Ø25 mm handrail tubing. Made of AISI 316 stainless steel, the bracket features a 60° inclined configuration. Both versions have the same dimensions: 35 mm width (A), 33 mm depth (B) and 38 mm height (H).
|
$ 11.43
Diameter, mm:
| ||
|
1-2 weeks delivery time The FNI 2945022 handrail terminal is part of the stainless steel pulpit joints and bases range and is designed for Ø22 mm handrail tubing. Made of AISI 316 stainless steel, it features a compact mounting base with two fixing holes. According to the technical drawing, the terminal measures 35 mm in width (A), 31 mm in base depth (B) and 52 mm in overall height (H).
|
$ 12.05
-
+
| ||
|
1-2 weeks delivery time The FNI 2942022 central handrail bracket is part of the stainless steel pulpit joints and bases range and is designed to support Ø22 mm handrail tubing. Made of AISI 316 stainless steel, it features a 60° inclined support and a mounting base with two fixing holes. Overall dimensions are 37 mm (A), 32 mm (B) and 52 mm (H).
|
$ 9.69
-
+
| ||
|
1-2 weeks delivery time The FNI handrail terminal is part of the stainless steel pulpit joints and bases range and is designed for Ø22 mm or Ø25 mm handrail tubing. Made of AISI 316 stainless steel, it is available in two sizes: article 2948022 with dimension A of 171 mm and article 2948025 with dimension A of 175 mm. Both versions have a B dimension of 38 mm.
|
$ 22.66
Diameter, mm:
| ||
|
1-2 weeks delivery time The FNI 2929010 terminal plug is part of the stainless steel pulpit joints and bases range and is designed to finish the end of Ø22 mm pulpit, railing or handrail tubing. Made of AISI 316 stainless steel, the plug has an overall height (H) of 40 mm and a 16 mm insertion section (H1).
|
$ 3.27
-
+
| ||