VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SMTO2S24 is a compact 24V electric marine toilet equipped with a porcelain bowl, quiet 60 dB(A) macerator with AISI 316 stainless-steel blades, and a simple rocker switch control. With only 12.5 A power draw and a 19 mm discharge outlet, it offers very low water consumption and is an ideal replacement for older manual toilets thanks to its lightweight design and small footprint. |
$ 1,998.95
-
+
|
|
1-2 weeks delivery time The Vetus WCPS12 is a compact 12V electric marine toilet designed as a direct replacement for older hand-pump toilets. It features a lightweight porcelain bowl, a quiet 60 dB(A) macerator with AISI 316 stainless-steel blades, and rocker-switch control. With 25 A power draw, G3/4 water inlet, and a 19 mm discharge outlet (adapters for 25 and 38 mm included), it offers very low water consumption, a minimal 250 × 240 mm footprint, and evacuation in roughly seven seconds. |
$ 1,297.16
-
+
|
|
1-2 weeks delivery time The Vetus WCPS24 Marine Electric Toilet (article WCPS24) is a compact 24V unit equipped with an external electronic control box, a rocker switch control, a super-quiet 60 dB(A) macerator with stainless-steel AISI 316 blades, and a large-capacity discharge pump. Featuring a female G3/4 water inlet connection, 19 mm external discharge, low water consumption, and 12.5 A power draw, it serves as an ideal lightweight replacement for older hand-pump marine toilets. |
$ 1,297.16
-
+
|
|
1-2 weeks delivery time The Vetus TMWBP Electronic Control Panel (article TMWBP) is a 12/24V marine toilet interface designed for TMWQ and TMSQ models, featuring four touch-operated functions: eco flush at approximately 1.2 L, normal flush at approximately 2.2 L, and dedicated bowl fill and empty controls. The panel measures 110 × 110 mm, has a 50 mm build-in depth, includes a 3 m installation cable, and carries an IP65 waterproof rating for reliable onboard use. |
$ 143.45
-
+
|
|
1-2 weeks delivery time The Vetus TMWBS Rocker Switch (article TMWBS) is a compact 12/24V waterproof IP65 control unit for TMWQ and TMSQ marine toilets, providing two essential functions: filling and emptying the bowl. The switch features a 78 × 47 mm panel size, a 40 mm build-in depth, and comes complete with a 3 m installation cable, ensuring simple and reliable operation in marine environments. |
$ 88.90
-
+
|
|
1-2 weeks delivery time The Vetus SET0137 Replacement Control Panel (article SET0137) is a dedicated service component designed for WCS2, WCL2, SMTO2, and HATO2 marine toilets. Supplied as a complete replacement panel for WCS-L/SMTO/HATO Type 2 systems, it ensures proper functional restoration of the original control interface and is intended specifically for the listed toilet models. |
$ 253.21
-
+
|
|
1-2 weeks delivery time The Vetus SET0212 Replacement Rocker Switch (article SET0212) is a 12/24V service component for WCP, WCPS, and SMTO2S marine toilets, supplied with wiring for direct replacement. The switch features a 75 × 45 mm panel size, a 40 mm build-in depth, and is designed for push-type toilet control functions. |
$ 192.10
-
+
|
|
1-2 weeks delivery time The Vetus SAPRO12 Sani-Processor (article SAPRO12) is a compact 12V waste-processing unit designed to enable installation of standard domestic toilets aboard larger vessels. Equipped with an integrated electric macerator and pump, it accepts inlet connection via a 102 mm hose, processes waste within 10–30 seconds, and discharges through a 19 mm outlet. The unit features 420 × 360 × 50 mm dimensions, 370 W power consumption, 50 L/min pump capacity, and a 4.8 kg weight. |
$ 1,584.08
-
+
|
|
1-2 weeks delivery time The Vetus SAPRO24 Sani-Processor (article SAPRO24) is a compact 24V waste-processing unit designed to enable installation of standard domestic toilets aboard larger vessels. Featuring an integrated electric macerator and pump, it connects via a 102 mm inlet hose with a required minimum fall of 50 mm per meter and discharges through a 19 mm outlet. The unit operates almost silently, processes waste within 10–30 seconds, consumes 435 W, measures 420 × 360 × 50 mm, weighs 4.8 kg, and delivers a pump capacity of 50 litres per minute. |
$ 1,584.08
-
+
|
|
1-2 weeks delivery time The Vetus SAPRO220 Sani-Processor (article SAPRO220) is a compact 230V, 50 Hz waste-processing unit equipped with an integrated electric macerator and pump, designed to enable installation of standard domestic toilets aboard larger vessels. It connects to the toilet via a 102 mm inlet hose, processes waste within 10–30 seconds, and discharges through a 19 mm outlet. The unit measures 420 × 360 × 50 mm, consumes 580 W, weighs 4.8 kg, and provides a pump capacity of 50 litres per minute. |
$ 1,584.08
-
+
|
|
1-2 weeks delivery time The Vetus GWDS12 Grey Water Discharge System (article GWDS12) is a compact 12V wastewater pump unit designed for vessels where shower or washbasin drainage cannot flow naturally into a holding tank. Featuring a 300 × 165 × 145 mm enclosure, 340 W power consumption, 3.5 kg weight, 44 L/min pumping capacity, and an automatic flow switch with non-return valve, it reliably transfers grey water either to a tank or overboard when required. |
$ 1,192.77
-
+
|
|
1-2 weeks delivery time The Vetus GWDS24 Grey Water Discharge System (article GWDS24) is a compact 24V wastewater transfer unit designed for vessels where shower tray or washbasin drainage cannot flow naturally into a holding tank. Equipped with a watertight housing, automatic float switch, quiet discharge pump, and non-return valve, it measures 300 × 165 × 145 mm, consumes 350 W, weighs 3.5 kg, and delivers a pump capacity of 44 litres per minute. Installation supports tanks located up to 4 meters above or 20 meters away from the unit. |
$ 1,192.77
-
+
|
|
1-2 weeks delivery time The Vetus GWDS220 Grey Water Discharge System (article GWDS220) is a compact 230V, 50 Hz unit designed to transfer wastewater from a shower tray or washbasin when no natural fall to a holding tank is available. The system features a watertight housing with a low-noise discharge pump, automatic float switch, and non-return valve. It measures 300 × 165 × 145 mm, consumes 600 W, weighs 3.5 kg, and provides a pump capacity of 44 litres per minute. |
$ 1,192.77
-
+
|
|
1-2 weeks delivery time The Vetus BTANK25C Waste Water Tank (article BTANK25C) is a 25-liter rigid synthetic tank designed for temporary onboard storage of black and grey water. Manufactured from high-grade polyethylene and supplied with a pre-fitted inspection lid, it includes a 19 mm breather connector and a 38 mm rotating suction connector with pickup pipe, while the inlet fitting is installed separately via the prepared 42 mm opening. The tank measures 430 × 300 × 320 mm and complies with ISO 8099 installation standards. |
$ 361.67
-
+
|
|
1-2 weeks delivery time The Vetus BTANK40C Waste Water Tank (article BTANK40C) is a 40-liter rigid polyethylene tank designed for temporary onboard storage of black and grey water. Supplied with a pre-installed inspection lid, it includes a fixed 19 mm breather connector and a rotating 38 mm suction connector with pick-up pipe. A 42 mm opening is provided for installing an inlet fitting (ordered separately). The tank measures 472 × 362 × 373 mm, complies with ISO 8099 standards, and incorporates an SAE sender mounting point with blind bolt holes. |
$ 410.83
-
+
|
|
1-2 weeks delivery time The Vetus BTANK60C Waste Water Tank (article BTANK60C) is a 60-liter rigid polyethylene tank designed for temporary onboard storage of black and grey water. It includes a pre-fitted inspection lid, a fixed 19 mm breather connector, and a rotating 38 mm suction connector with pick-up pipe. A 42 mm prepared opening allows installation of an inlet fitting (ordered separately). The tank measures 682 × 362 × 373 mm, complies with ISO 8099 standards, and incorporates an SAE sender mounting point for an optional level gauge. |
$ 442.49
-
+
|
|
1-2 weeks delivery time The Vetus BTANK80C Waste Water Tank (article BTANK80C) is an 80-liter rigid polyethylene tank for temporary onboard storage of black and grey water. Supplied with a pre-fitted inspection lid, it includes a fixed 19 mm breather connector and a rotating 38 mm suction connector with pick-up pipe. A 42 mm prepared hole is provided for installing an inlet fitting (ordered separately). The tank measures 892 × 362 × 373 mm, complies with ISO 8099 standards, and includes an SAE sender mounting point with blind bolt holes. |
$ 494.35
-
+
|
|
1-2 weeks delivery time The Vetus WW25WH Waste Water Tank (article WW25WH) is a 25-liter horizontal bulkhead-mounted polyethylene tank designed for black and grey water storage in confined spaces or where underfloor installation is impractical. Supplied with an inspection cover, a 38 mm suction connection, a 38 mm discharge outlet, and a 19 mm breather connector, it features odour-impermeable construction and semi-transparent walls for visual level checks. The tank measures 430 × 235 × 475 mm and includes a prepared hole for installing an inlet fitting (ordered separately). |
$ 536.10
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.