Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 1737-207 shaft component is a high-quality spare part engineered for reliable performance in industrial and marine applications. Identified by shaft numbers 6490-222 and 6490-223, it is precision-crafted to support optimal equipment operation and long service life in demanding use cases such as marine propulsion and industrial machinery. |
$ 547.50
-
+
|
|
1-2 weeks delivery time The Jabsco 17370-0001-P neoprene impeller is a 12-blade replacement rotor built for smooth, efficient water circulation in marine and industrial pump applications. Its Drive Type 5 design, 3-3/4 inch diameter, and 3-1/2 inch width support consistent pumping performance, while the 1-inch shaft and plastic insert add stability for reliable service in demanding environments. |
$ 411.22
-
+
|
|
1-2 weeks delivery time The Jabsco 17370-0001B neoprene impeller is a 12-blade flexible rotor designed to deliver efficient, reliable pumping in marine and industrial pump applications. It features a double flat drive with a 25.4 mm shaft fit and 95 x 88.9 mm dimensions, plus a plastic insert for secure operation in both freshwater and saltwater environments. Built for demanding service, it supports speeds up to 3,500 RPM and is listed as an alternative to selected Caterpillar, Cummins, and Detroit Diesel part numbers as well as multiple Jabsco 17370-series references. |
$ 340.41
-
+
|
|
1-2 weeks delivery time The Jabsco 17372-1000 stainless steel wear plate is a corrosion-resistant wear component built to enhance machinery performance and longevity in demanding marine and industrial environments. Its durable construction helps maintain smooth operation under abrasive conditions, making it a reliable Jabsco spare part option, with published cross-references to Caterpillar and Detroit Diesel numbers. |
$ 212.78
-
+
|
|
1-2 weeks delivery time The Jabsco 17374-1000 cam liner kit is a precision-engineered component for industrial machinery that helps maintain smooth operation and long service life in demanding environments. Built for heavy-duty use, it is supplied as a Jabsco spare part and is listed as an alternative to several Jabsco and OEM reference numbers while keeping shipping weight to 0.60 kg. |
$ 487.70
-
+
|
|
1-2 weeks delivery time The Jabsco 17532-0020 bearing housing kit is a high-quality component designed to support durable, reliable performance for bearing housing needs in industrial and commercial applications. Its innovative design and superior materials help enhance equipment longevity and overall operating performance when used as an essential upgrade part. |
$ 1,347.76
-
+
|
|
1-2 weeks delivery time The Jabsco 17536-0000 shaft service kit is an essential spare-part assembly for marine pump systems, designed to support smooth and reliable operation. Its corrosion-resistant construction helps deliver durability in saltwater environments, while the easy-to-install, easy-to-maintain design minimizes downtime and keeps maintenance straightforward. |
$ 600.06
-
+
|
|
1-2 weeks delivery time The Jabsco 17800-2000 oil change pump kit is a self-contained, reversible pumping solution built to simplify engine oil changes, featuring a FORWARD/OFF/REVERSE switch, self-priming up to 1.2 m vertical lift, and output up to 7 litres per minute at 1 m head. Supplied with pipes, adapters, a dipstick probe, battery clips, and a switch, it also includes a 13-litre oil container and a bronze pump body with an oil-resistant nitrile flexible impeller for dependable oil handling. |
$ 652.09
-
+
|
|
1-2 weeks delivery time The Jabsco 17800-2024 reversible oil-changing pump delivers a 1.5 gpm transfer rate on 24V power to simplify engine oil service. Porta Quick technology supports both draining and refilling, while the included 13 L container provides practical capacity for cleaner, more efficient oil changes. This version is supplied as non-CE. |
$ 825.82
-
+
|
|
1-2 weeks delivery time The Jabsco 17810-1300 bronze impeller cooling-water pump delivers dependable engine temperature control for marine applications with a robust, corrosion-resistant build. Designed as a flange version with square flange connections and a 50.8 mm inside diameter, it supports efficient installation while providing 200 l/min output. A 25.4 mm shaft diameter and spline drive help ensure secure power transfer, and the durable construction is built to withstand harsh marine conditions. |
$ 2,435.27
-
+
|
|
1-2 weeks delivery time The Jabsco 17820-0024 oil change pump system streamlines oil changes with a close-coupled 24 volt DC motor and a bronze flexible impeller pump built for durable, user-friendly operation. Its manifold is factory fitted with three ball valves to serve three oil reservoirs and can be expanded with two additional ball valves to drain up to five reservoirs, while the integral reversing switch allows the system to remove used oil and then pump a measured amount of new oil back into an engine or transmission. Nitrile impeller and a Buna lip type shaft seal support dependable service, and the protective cover shrouds the pump and valve set while helping prevent accidental valve operation. |
$ 1,405.23
-
+
|
|
1-2 weeks delivery time The Jabsco 17830-0012 reversible oil change pump and motor unit delivers smooth, controlled oil extraction and refill for marine maintenance using a 12 Volt DC drive and an integral reversing switch. Its bronze pump body with a nitrile flexible impeller and Buna lip-type shaft seal supports dependable service, while 3/8 inch NPT ports simplify permanent plumbing near the engine. Designed as a replacement pump for the Jabsco 17800 system, it is self-priming from dry up to 1.2 m and provides a stated flow rate of 6.3 gallons per minute. |
$ 746.80
-
+
|
|
1-2 weeks delivery time The Jabsco 17830-0024 reversible oil change pump delivers fast engine-oil extraction and refilling for marine and industrial applications, using a reversible permanent magnet motor with an integral reversing switch to change flow direction. Its 6.3 GPM (24 LPM) performance and self-priming capability up to 4 ft (1.2 m) support flexible installation near the engine oil pan, while a bronze body, nitrile impeller, and Buna lip-type seal enhance durability. A built-in 3/8 in NPT full-flow ball valve helps prevent accidental oil discharge, and EMC compliance supports safe electrical operation. |
$ 764.60
-
+
|
|
1-2 weeks delivery time The Jabsco 17860-2012 flat tank oil-changing unit delivers 12V operation to simplify oil changes with a powerful, hassle-free approach. Its compact flat tank design and durable construction help reduce mess and support efficient maintenance in both marine and automotive applications, saving time and effort while helping keep equipment performing at its best. |
$ 488.43
-
+
|
|
1-2 weeks delivery time The Jabsco 17935-0001-P impeller kit is a flexible neoprene replacement designed for fresh and saltwater pumping, featuring a 12-blade Q-profile impeller with a 25.4 mm spline-drive shaft and 95 x 63.5 mm dimensions. It is built to deliver dependable pumping efficiency and durability, can handle small quantities of oil or diesel fuel in the pumped liquid, and is specified as compatible with Volvo Penta and many other engines as well as multiple Jabsco pump models. |
$ 88.24
-
+
|
|
1-2 weeks delivery time The Jabsco 17935-0001B neoprene impeller is a durable 12-blade replacement component for marine pumping and cooling systems, built in a 95 x 63.5 mm size with a 25.4 mm spline-drive shaft fit. Its neoprene construction (with brass insert) supports dependable water flow, and it is listed as compatible with Volvo Penta, Johnson, and Yanmar applications using the referenced part numbers. |
$ 97.05
-
+
|
|
1-2 weeks delivery time The Jabsco 17936-0001 flexible neoprene impeller is a dependable replacement component for marine and industrial pumping applications, designed to move fresh or salt water where minimal oil or diesel is present. It features 12 blades, a splined drive, and is supplied with a plug, providing a practical fit for compatible pumps across multiple brands including Caterpillar, Cummins, Detroit Diesel, Jabsco, Johnson, Man, Perkins, and Volvo Penta. Rigorous quality control supports consistent durability and performance, with annual replacement recommended as part of preventative maintenance. |
$ 214.30
-
+
|
|
1-2 weeks delivery time The Jabsco 17936-0001-P impeller kit delivers high-performance pumping with a 12-blade neoprene impeller and durable brass hub, built for spline drive shafts. With 95 x 89 mm dimensions and a 25 mm shaft diameter, it is designed as a reliable spare part solution and cross-references multiple replacement part numbers across Jabsco, Volvo, Johnson, Detroit Diesel, and other brands. |
$ 177.17
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.