Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 14052-B sealing component is a high-quality, durable spare part engineered to deliver reliable sealing performance and long-lasting service life across various applications, helping maintain dependable operation where a replacement seal is required. |
$ 309.68
-
+
|
|
1-2 weeks delivery time The Jabsco 1414-0001-P flexible impeller service kit supports reliable performance in engine cooling and transfer pump duties by combining a 6-blade neoprene impeller with a gasket set and impeller lubricant. Built for Jabsco 12210-Series utility pumps, it features a single flat drive hub, 32 mm diameter, 12 mm width, and an 8 mm shaft size with a brass insert for dependable fit and fluid movement. |
$ 53.50
-
+
|
|
1-2 weeks delivery time The Jabsco 1414-0001B impeller unit is a 6-blade, 32 mm diameter component designed to support optimal water flow and engine cooling in marine engine systems. Engineered for durability and efficiency, its six-blade design is described as enhancing propulsion for smooth navigation while providing reliable operation and improved engine efficiency and longevity. |
$ 63.68
-
+
|
|
1-2 weeks delivery time The Jabsco 1414-0003-P nitrile impeller service kit delivers dependable suction and fluid transfer for diesel fuel transfer systems and marine oil changer applications. Its flexible 6-blade, single flat drive design combines chemical resistance with consistent performance, while the 32 x 12 mm size with an 8 mm shaft and brass insert supports precise fitment. This kit replaces CEF 500206 and includes a set of gaskets plus impeller lubricant for convenient servicing. |
$ 65.38
-
+
|
|
1-2 weeks delivery time The Jabsco 1414-0003B impeller is a nitrile flexible impeller built for reliable performance in marine and industrial pump systems. Its profile A design uses a single flat drive with a brass insert and a 6-blade configuration to support smooth, durable operation. With 32 x 12 mm dimensions and an 8 mm shaft diameter, it is produced under strict quality controls and listed as compatible with Jabsco 1414-0003-P, 1414-0003B, and 1414-0003. |
$ 49.51
-
+
|
|
1-2 weeks delivery time The Jabsco 14281-0001B replacement impeller delivers dependable water pump performance for marine, RV, and industrial use, supporting efficient flow in freshwater and saltwater environments. Its durable neoprene construction with a plastic insert, 12-blade design, and double flat drive helps maintain stable operation while minimizing wear. With a 57 mm outer diameter, 31.5 mm depth, and 16 mm shaft size, it is built for quick installation to reduce maintenance downtime in cooling, bilge, and fluid transfer applications. |
$ 184.64
-
+
|
|
1-2 weeks delivery time The Jabsco 14281-0003B flexible impeller is a nitrile replacement component for pumping systems, built with a double flat drive and a plastic insert for secure fit and dependable torque transfer. Its 12-blade design supports robust operation, while the 57 mm impeller diameter, 31.5 mm depth (1-1/4"), 16 mm shaft diameter, and 57 x 51 mm overall dimensions make it a precise choice when matching existing hardware. |
$ 184.64
-
+
|
|
1-2 weeks delivery time The Jabsco 14282-0001B neoprene impeller is a durable replacement pumping component for marine and industrial use, built with a reinforced plastic insert and a double flat drive for a secure shaft connection. Its 8-blade design, 65 mm diameter, 51 mm depth, and 16 mm shaft size support efficient water flow in applications such as engine cooling systems, bilge pumps, and water transfer in both freshwater and saltwater environments. Resistance to oil, fuel, and heat, plus a -20°C to 80°C operating range, 3,000 max RPM, and 2 bar max pressure help deliver reliable performance with minimal maintenance. |
$ 232.25
-
+
|
|
1-2 weeks delivery time The Jabsco 14282-0003B nitrile impeller is a durable replacement rotor for marine and industrial water pump applications, built with an 8-blade design to support efficient flow and reliable operation. Its nitrile construction with a plastic insert and double flat drive hub suits Jabsco pumps using a twin flat drive system, while the 65 mm outer diameter, 51 mm depth, and 16 mm shaft diameter help ensure proper fitment. Designed for freshwater, saltwater, and light oils, it supports operation from -20°C to 82°C, up to 3,500 RPM, and up to 5 bar, helping reduce downtime and maintenance through long-lasting performance. |
$ 232.25
-
+
|
|
1-2 weeks delivery time The Jabsco 14346-0002B impeller replacement unit delivers efficient water pumping with a 12-blade EPDM rubber design that resists heat, chemicals, oils, and wear. Its 95 mm diameter, 64 mm depth, and 25 mm shaft size suit medium-pressure service up to 4 bar (58 PSI), while the double flat drive and plastic insert provide a secure shaft connection and added durability. Certified food-safe to FDA and EU requirements (also listed with 3A), it is suitable for marine, industrial, and food processing use in both freshwater and saltwater environments, with an operating temperature range of -30°C to 120°C and a maximum speed of 3,500 RPM. |
$ 592.58
-
+
|
|
1-2 weeks delivery time The Jabsco 14346-0003B flexible impeller is a nitrile impeller with 12 blades and a double flat drive, built for efficient pumping of fuel or water contaminated with oil or diesel. Its robust nitrile construction and plastic insert support durable, reliable operation, backed by rigorous quality control. The design targets media containing oil and is stated for use in an approximate 10°C to 90°C temperature range. |
$ 494.32
-
+
|
|
1-2 weeks delivery time The Jabsco 14346-0005B food-grade neoprene impeller is a high-performance replacement component for marine, industrial, and food-processing pump applications. Its 12-blade design, double flat drive hub, and plastic insert support secure installation and efficient circulation, while the 95.25 mm diameter, 63.5 mm depth, and 25.4 mm shaft size match compatible pump requirements. Rated for medium pressure, up to 5 bar operating pressure and 3,600 RPM maximum speed, it is specified for fluids such as water, food-grade liquids, light oils, and compatible chemicals, with FDA and 3A certifications listed and operating temperature ranges stated as approximately 4°C to 70°C and -20°C to 82°C. |
$ 435.36
-
+
|
|
1-2 weeks delivery time The Jabsco 14609-0001B neoprene impeller is a standard 6-blade water pump impeller for marine and industrial use, built with a single flat drive hub and an 8 mm shaft size. Its 32 x 12 mm dimensions and approx. 4°C to 80°C operating temperature range support dependable pumping of water and other simple fluids, with a brass insert and high-pressure suitability noted for demanding applications. |
$ 136.17
-
+
|
|
1-2 weeks delivery time The Jabsco 14750-0001B neoprene impeller is an 8-blade replacement rotor for Jabsco rubber impeller pumps, built with a single flat drive and a 8 mm shaft fit. Its 32 x 12 mm size and brass insert support dependable circulation for water and other simple media in marine and industrial applications, with a recommended operating temperature range of approximately 4°C to 80°C. For long idle periods, lubrication is recommended to help prevent sticking and maintain reliable pump start-up. |
$ 59.98
-
+
|
|
1-2 weeks delivery time The Jabsco 14750-0003-P nitrile impeller service kit is engineered for marine pump systems, combining wear and corrosion resistance with reliable, long-lasting operation. It includes a nitrile impeller (profile B) with a single flat drive plus a gasket set (including gasket 7828-0000) and impeller lubricant for straightforward replacement. With a 32 mm diameter, 12 mm depth, 8 mm shaft diameter, and 8-blade design with a brass insert, it matches the same impeller used in 14750-0003B and 14750-0003. |
$ 81.27
-
+
|
|
1-2 weeks delivery time The Jabsco 15278-1000 flapper subassembly kit is a precision-engineered spare part designed to support reliable performance and long service life in marine and industrial pump systems. Built with durable construction and dependable functionality, it helps simplify upkeep with easy installation and maintenance for demanding environments. |
$ 588.09
-
+
|
|
1-2 weeks delivery time The Jabsco 15294-1020 wear ring service kit supports ongoing pump maintenance by supplying a wear ring and an M12 set screw in one package. Intended for use on compatible Jabsco pump models, it helps restore reliable operation and reinforces the value of regular wear-component replacement for long-term pump performance. Installation instructions are included to guide correct fitment. |
$ 784.14
-
+
|
|
1-2 weeks delivery time The Jabsco 15296-1000 kit plate component is a precision-crafted spare part designed to upgrade and support marine pump system operation. Engineered for reliability in demanding marine environments, it helps enhance pump efficiency while promoting smooth operation and long-lasting performance using high-quality materials. |
$ 1,544.38
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.