ID
1075608
$ 1,405.23
1-2 weeks delivery time
-
+
The Jabsco 17820-0024 oil change pump system streamlines oil changes with a close-coupled 24 volt DC motor and a bronze flexible impeller pump built for durable, user-friendly operation. Its manifold is factory fitted with three ball valves to serve three oil reservoirs and can be expanded with two additional ball valves to drain up to five reservoirs, while the integral reversing switch allows the system to remove used oil and then pump a measured amount of new oil back into an engine or transmission. Nitrile impeller and a Buna lip type shaft seal support dependable service, and the protective cover shrouds the pump and valve set while helping prevent accidental valve operation.
- Description
- Ask a Question
-
Jabsco 17820-0024 24 Volt DC Oil Change Pump System
The Jabsco 17820-0024 oil change system is a dedicated pump and manifold unit designed to make routine oil service cleaner and more controlled. Built for installation in a vessel’s engine room, it is intended to be permanently plumbed to engine oil pans or transmission oil sumps, supporting efficient oil removal and refill through a single integrated system.
Application
- Designed for installation in a vessel’s engine room
- Manifold and valves intended to be permanently plumbed to engines’ oil pans
- Also suitable for transmissions’ oil sumps
- Factory manifold supports three oil reservoirs and may be expanded to drain up to five oil reservoirs
Technical Specifications
Brand Jabsco Part Number 17820-0024 Rated Voltage 24 Volts DC Pump Type Flexible Impeller Pump Pump Body Material Bronze Impeller Material Nitrile Shaft Seal Type Buna Lip Type Seal Motor Close-Coupled 24 Volts DC Motor Manifold Valves Factory fitted with three ball valves; may be fitted with two additional ball valves Flow Direction Control Integral Reversing Switch
Product Details
- Designed to remove old oil from an engine or transmission and then reverse to pump a measured amount of new oil back in
- Each engine connection is controlled by a dedicated full-flow ball valve
- Cover fully shrouds the pump and manifold for an enclosed, protected installation
- Cover helps protect the factory supplied valves from being accidentally bumped open
- Cover will not close unless the factory supplied valves are in the fully closed position
- Operational note: do not allow the pump to run dry for more than about thirty seconds to help avoid impeller damage
Features
- 24 volt DC operation for reliable powered oil transfer
- Bronze construction for durable service
- Nitrile impeller with Buna lip type shaft seal
- Factory manifold with ball valves serving three reservoirs, expandable up to five
- Reversible pumping to support drain and refill using the same system
- Protective shrouded cover that helps reduce accidental valve operation
Spare Parts
- Impeller: Catalog # 9200-0023
-
Popular products
-
-
1-2 weeks delivery time$ 2,435.27 -
-
-
-
-
-
-
-
