Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 17936-0001B neoprene impeller is a 12-blade flexible rotor with a brass insert, built for spline-drive pump installations on inboard engines. With a 95 mm diameter and approximately 88.9–89 mm depth/height, it supports reliable fluid flow for marine engine cooling and other circulation duties in demanding environments. |
$ 150.57
-
+
|
|
1-2 weeks delivery time The Jabsco 17937-0001-P impeller and gasket service kit delivers efficient water movement for marine pump systems using a 10-blade neoprene impeller (65 mm diameter, 51 mm depth/height) with a 16 mm, 10-spline drive. Designed for most 1-inch ported Jabsco and Johnson pumps, it includes a set of gaskets plus additional service items to support reliable, long-lasting pump performance in demanding marine environments. |
$ 59.58
-
+
|
|
1-2 weeks delivery time The Jabsco 17937-0001B neoprene impeller is a key water pump component for marine engines, built with 10 blades to support smooth pump operation. Its 65 mm x 51 mm size and 16 mm shaft diameter help ensure proper fit, and the included spline plug supports reliable installation for consistent performance. |
$ 104.11
-
+
|
|
1-2 weeks delivery time The Jabsco 17937-0003-P nitrile impeller kit upgrades marine engine water pump systems with a durable, reliability-focused design built to withstand harsh marine conditions. Its precise engineering supports smooth operation, optimal efficiency, and long service life for dependable performance on the water. |
$ 86.08
-
+
|
|
1-2 weeks delivery time The Jabsco 17937-0003B flexible nitrile impeller is a 10-blade replacement unit built for efficient fluid transfer in oily bilge water applications. Its chemical-resistant nitrile construction, 65 mm diameter x 51 mm depth sizing, and 16 mm spline shaft fit help ensure secure, consistent pumping performance, and it is supplied complete with a spline seal for installation. |
$ 71.32
-
+
|
|
1-2 weeks delivery time The Jabsco 17938-0001-P neoprene impeller kit delivers smooth, efficient water pumping with a 12-blade, Drive Type 7 spline-drive design for reliable fluid transfer. A 3-3/4 in (95 mm) diameter and 3-3/4 in (95 mm) width, plus a 1 in (25.4 mm) shaft with brass insert, support stable operation and wear resistance, while the included gaskets, spline seal, and impeller lubricant help simplify service. Built for pumping simple media such as water, it is specified for an approximate temperature range of 4°C to 80°C and is listed as an alternative to Volvo Penta 3830459 and Jabsco 17938-0001B / 17938-0001. |
$ 437.50
-
+
|
|
1-2 weeks delivery time The Jabsco 17938-0001B neoprene impeller is a durable replacement component for marine engines, built to support efficient water circulation for cooling. Made from high-quality neoprene, it is designed for long service life in demanding marine environments and suits both recreational and commercial boating use. |
$ 466.19
-
+
|
|
1-2 weeks delivery time The Jabsco 17954-0001-P neoprene impeller is a replacement water-pump component built for durability and efficient water flow in marine applications. It uses a Drive Type 4 configuration with a 10-blade design and a brass insert to support reliable operation and longevity in demanding environments. With a 2-9/16 inch diameter, 2 inch width, and 3/4 inch shaft size, it is designed for compatibility and straightforward installation on suitable pumps. |
$ 136.30
-
+
|
|
1-2 weeks delivery time The Jabsco 17954-0001B neoprene impeller replacement part is engineered for marine pump systems to deliver reliable performance with strong resistance to wear and tear. Built to precise design expectations, it supports efficient water flow for demanding marine applications, including cooling systems and bilge pumps, helping maintain smooth operation and long service life. |
$ 145.24
-
+
|
|
1-2 weeks delivery time The Jabsco 17956-0001-P flexible impeller service kit supports smooth water circulation for marine engine cooling and is built for tough marine conditions. It uses a neoprene impeller with a brass insert, features 10 blades, and is designed for pumping simple media such as water across an approximate 4°C to 80°C temperature range. With a 65 mm diameter, 61 mm depth, 16 mm shaft diameter, and a Ding Drive Keyway hub, it provides a standard pressure-range replacement option, with a shipping weight of 0.10 kg and guidance to verify liquid and material compatibility before operation. |
$ 274.95
-
+
|
|
1-2 weeks delivery time The Jabsco 17956-0003B pump impeller is a nitrile component built for marine and industrial applications, helping maintain pump efficiency and reliable operation in demanding conditions. Its nitrile construction provides resistance to oil, heat, and abrasion, supporting long service life when used in Jabsco pump systems. |
$ 274.95
-
+
|
|
1-2 weeks delivery time The Jabsco 17969-0000 spline seal kit is a durable marine spare part designed to help prevent leaks and maintain smooth operation in demanding marine conditions. Supplied as a 3-piece set, it is engineered to provide a tight, secure fit for reliable performance on board. |
$ 33.46
-
+
|
|
1-2 weeks delivery time The Jabsco 17970-0100 marine cooling pump is a robust, self-priming flexible-impeller unit built for Caterpillar engine cooling, featuring a 2 1/2-inch flange mount for straightforward installation. A neoprene impeller and marine-quality bronze and stainless-steel construction support reliable operation in demanding environments, while dry and wetted suction-lift capability helps enable cleaner, safer installations when suction lines are airtight. |
$ 3,924.81
-
+
|
|
1-2 weeks delivery time The Jabsco 18220-1127 reversible ballast pump delivers fast filling and draining for wakeboard and ski boat ballast tanks, with a stated output of up to 35 liters per minute (9 US gallons per minute) to fill a 180-liter tank in under 5 minutes. The 12V DC, self-priming, non-air-locking design helps maintain dependable flow, while the bronze pump body and stainless steel shaft support long service life in harsh marine environments. Flexible hose and adapter options, plus an included reversing switch and run-dry protection device, make installation and day-to-day ballast control straightforward. |
$ 621.58
-
+
|
|
1-2 weeks delivery time The Jabsco 18327-0001-P impeller kit is a compact neoprene replacement component featuring a 10-blade design with 65 mm diameter and 51 mm length, built for a 16 mm keyed shaft. It is suitable for Sherwood 15000 series applications and is not compatible with Volvo Penta, Yanmar, Johnson, or Vetus systems. |
$ 105.04
-
+
|
|
1-2 weeks delivery time The Jabsco 18327-0001B neoprene impeller is a high-quality 10-blade impeller built for efficient operation, featuring a 65 mm x 51 mm size, a 16 mm shaft diameter, and a brass insert to support optimal performance. |
$ 229.04
-
+
|
|
1-2 weeks delivery time The Jabsco 18590-2092 12V macerator waste pump is a self-priming unit built to grind and discharge toilet waste from marine holding tanks, with a stainless steel cutter, triple-sealed motor design, and dry-run protection to help reduce clogging and corrosion risk. It supports 38 mm inlet and 25 mm discharge connections and delivers high-flow waste transfer performance with output figures listed up to 43 liters/minute at 3 m head, plus additional output data provided for 0 m and 6 m head operation. |
$ 322.28
-
+
|
|
1-2 weeks delivery time The Jabsco 18590-2094 macerator pump is a 24V waste-handling unit built for marine waste management, combining grinding capability with run-dry protection and a sealed motor design to support reliable onboard discharge. It is specified as self-priming up to 0.6 m vertical lift and is also listed as self-priming up to 1.2 m, with performance noted at 46 L/min at 0 m and 28 L/min at 6 m head. With a stainless steel cutter, nitrile impeller, and compact 290 mm x 120 mm x 95 mm form factor, it suits holding tank, livewell, and fish box evacuation with 38 mm inlet and 25 mm discharge connections. |
$ 322.28
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.