Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 45500-1000 spacer accessory enables through-bulkhead mounting of a compatible Y valve while keeping the handle accessible from the outside. Designed for use with the 45490-1000 Y-Valve and compatible with the Jabsco 45490 handle extension, it delivers a durable, reliable solution for marine and industrial equipment installations. |
$ 19.80
-
+
|
|
1-2 weeks delivery time The Jabsco 4568-0001-P neoprene impeller kit is a 12-blade, key-drive service kit for dependable pumping duties in marine conditions. Built around a flexible neoprene impeller with a 16 mm shaft diameter and K profile, it is supplied as a complete kit including gasket(s) and impeller lubricant to support efficient operation in fresh or saltwater. The kit is compatible with Jabsco 4900 series pumps and listed Volvo Penta engines, and it also cross-references common replacement part numbers from Jabsco, Johnson, Volvo, Yanmar, CEF, and Orbitrade Marine. |
$ 83.21
-
+
|
|
1-2 weeks delivery time The Jabsco 4568-0001B neoprene impeller is a 12-blade marine engine component built to support efficient water circulation in fresh and saltwater use. With 57 x 31.8 mm dimensions and a 16 mm wedge-key shaft fit, it is designed for compatibility with multiple marine engine brands including Volvo Penta, Yanmar, and Johnson, and it replaces several referenced impeller part numbers for straightforward service replacement. |
$ 83.21
-
+
|
|
1-2 weeks delivery time The Jabsco 4568-0003B nitrile impeller is a durable replacement component engineered for efficient, reliable pump operation across marine, industrial, and other compatible systems. Its nitrile construction is often selected for pumping media containing oil, while the key-drive hub and brass insert support secure fit and long service life within a standard pressure range. |
$ 93.11
-
+
|
|
1-2 weeks delivery time The Jabsco 4598-0001-P impeller kit is a flexible neoprene rubber 8-blade replacement impeller built for marine engine cooling and fresh or saltwater transfer. Its key-drive profile and wedge-style shaft interface support dependable circulation, while the brass insert and strong chemical resistance help deliver durable performance across a wide range of marine engine applications. |
$ 116.88
-
+
|
|
1-2 weeks delivery time The Jabsco 4598-0001B flexible neoprene impeller is a key-drive replacement component built for marine and industrial water pumps, supporting efficient circulation in both fresh and saltwater use. Its 8-blade design, 65 mm diameter, and 51 mm depth are matched to Jabsco pumps using a 16 mm key drive shaft for a secure fit and reliable operation. Neoprene construction helps resist wear, corrosion, and abrasion, while operation is specified up to 3,500 RPM with flow rates up to 50 liters/min and a recommended temperature range of -10°C to 60°C. |
$ 116.88
-
+
|
|
1-2 weeks delivery time The Jabsco 4598-0003-P nitrile impeller service kit is a durable replacement component for marine engine cooling and circulation, delivering reliable pumping action in demanding marine environments. Designed for compatibility with Jabsco marine pumps, it includes the nitrile key-drive impeller plus a cover seal and impeller lubricant, supporting efficient operation across an approximate 10°C to 90°C temperature range. |
$ 153
-
+
|
|
1-2 weeks delivery time The Jabsco 4598-0003B nitrile impeller 080 SP NIO KEY supports reliable water circulation in marine engines to help prevent overheating. Its nitrile construction is designed to withstand harsh marine conditions while offering resistance to abrasion, chemicals, and oils, and it is intended to simplify maintenance with easy installation. |
$ 163.04
-
+
|
|
1-2 weeks delivery time The Jabsco 46200-0000 inline inlet strainer unit protects electric diaphragm bilge pumps by capturing grit and debris before it reaches the pump. A durable plastic body with a clear, screw-off lid makes inspection and cleaning quick, while the 20 mesh stainless steel filter screen helps prevent clogging and valve jamming. Designed for 2 x 19 mm (3/4 in) hose connections, it supports potable water and salt water applications and is specified for up to 27 L/min (7 GPM) flow in an inline configuration. |
$ 35.74
-
+
|
|
1-2 weeks delivery time The Jabsco 46200-0010 inlet strainer is a Pumpgard coarse filter that helps protect bilge pump systems by preventing debris from entering the pump and jamming valves. Built in a 90° design with a 19 mm (3/4 in) hose inlet and a male plug-in outlet port for 2–5 GPM pumps, it supports potable water and salt water use and delivers up to 27 L/min (7 GPM). A transparent screw-off housing allows fast inspection and cleaning of the stainless-steel strainer screen for easy maintenance. |
$ 37.68
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0000 Pump Guard inline strainer protects manual or electric toilet pumps by filtering debris through a fine 40-mesh stainless steel screen. Built for 19mm (3/4 in) hose-to-hose connections, it supports potable water and salt water use and features a transparent screw-on cover for fast inspection and cleaning. With an inline design rated up to 27 LPM (7 GPM), it is designed to help prevent valve jamming and pump breakdowns in marine systems. |
$ 35.74
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0002 inline inlet strainer protects electric diaphragm fresh water pumps by capturing grit and particles at the pump inlet. Its clear, screw-off lid makes inspection and cleaning simple, while the fine 40 mesh stainless steel screen supports clean water intake for potable water and salt water applications. Designed for hose-to-hose installation with 2 x 13 mm (1/2 in) connections, it is rated for up to 16 LPM (4 GPM) flow, 5 bar (70 PSI) pressure, and 70 °C maximum temperature. |
$ 35.74
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0003 Pumpgard inline strainer kit protects water pump systems by filtering debris before it can jam valves and cause pump breakdowns. Its inline design supports up to 8 LPM (2 GPM) flow, uses 10 mm (3/8 in) hose connections on both inlet and outlet, and features a fine 40-mesh stainless steel screen for dependable filtration in potable water and salt water applications. |
$ 39.56
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0004 Pumpgard inline strainer protects pumps by filtering particles from incoming water to reduce the risk of valve jamming and pump breakdowns. It uses a 40 mesh stainless steel filter screen inside a transparent, screw-off housing for fast visual inspection and easy cleaning without removal. Designed with 15 mm (1/2 in) male threaded inline connections, it supports potable water and salt water applications, with rated limits of up to 23 L/min (6 GPM) flow, 5 bar (70 PSI) pressure, and 70°C maximum temperature. |
$ 35.74
-
+
|
|
1-2 weeks delivery time The Jabsco 46400 0010 snap-in inlet strainer helps protect fresh water pump systems by trapping grit before it reaches the pump valves and internals. It connects directly to a 19 mm (3/4") inner diameter hose and snaps into the inlet port of Jabsco Par-Max electric diaphragm fresh water pumps, using a clear, screw-off housing for fast inspection and cleaning. A 40 mesh stainless steel screen supports up to 27 LPM (7 GPM), with a maximum pressure of 5 bar (70 PSI) and temperature up to 70°C (158°F), making it suitable for both potable water and saltwater applications. |
$ 35.74
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0012 snap-in inlet strainer helps protect fresh water pumps by filtering grit and debris before it enters the pump. It connects to a 13 mm (1/2 in) hose and snaps directly into the Par-Max pump inlet port, using a 40 mesh stainless steel filter screen and a clear, screw-off housing for fast inspection and cleaning. The 90° design supports up to 16 L/min (4 GPM) flow, with rated limits of 5 bar (70 PSI) and 70 °C for dependable service in marine and RV water systems. |
$ 35.74
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0014 inlet strainer is a threaded Pumpgard filtration accessory for fresh water pump systems, designed to help protect Par-Max pumps by filtering debris before it reaches the pump. Its 90° body with a fine 40-mesh stainless steel screen supports up to 23 LPM (6 GPM), while the transparent screw-off housing makes inspection and cleaning straightforward for long-lasting, efficient pump operation in potable water and salt water applications. |
$ 37.68
-
+
|
|
1-2 weeks delivery time The Jabsco 46400-0030 inlet mini strainer helps protect fresh water pumps from debris-related breakdowns by filtering particles before they reach the pump. Built for Parmax and Triplex circulation ranges (3–5 GPM noted) and featuring a transparent housing with a clip-off top, it enables fast inspection and easy cleaning. A 40 mesh stainless steel screen (approximately 0.4 mm openings) supports dependable operation for potable water and salt water applications in compact installations. |
$ 27.24
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.