Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E5037 oil pressure adjusting washer is a relief-valve shim used in the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. Installed as an adjusting disc at the relief valve, it helps set and stabilize oil pressure for dependable lubrication and consistent engine operation. |
$ 8.04
-
+
|
|
1-2 weeks delivery time The Bukh 000E5042 oil pipe nipple is a small but critical connection fitting in the DV36 lubrication pump pipework. It supports a secure, leak-resistant joint in the engine’s oil line routing, helping maintain reliable oil flow to protect moving components under continuous marine duty. |
$ 62.69
-
+
|
|
1-2 weeks delivery time The Bukh 000E5047 sealing gasket is used in the fuel injection and valves assembly on BUKH DV36 and DV48 marine diesel engines. It helps create a tight seal between mating surfaces to support clean, stable operation of the injection and valve system and to keep the assembly properly secured during service. |
$ 35.35
-
+
|
|
1-2 weeks delivery time The Bukh 000E5050 thrust washer is a precision spacer washer used at the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps control end float and supports smooth, stable rotation, protecting adjacent components by maintaining correct axial positioning under load. |
$ 127.78
-
+
|
|
1-2 weeks delivery time The Bukh 000E5068 mounting bracket secures the tension device in the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. Designed as a direct-fit support component, it helps keep the tensioning hardware correctly positioned to maintain stable accessory drive alignment in demanding marine operation. |
$ 306.15
-
+
|
|
1-2 weeks delivery time The Bukh 000E5092 starter motor mounting bracket secures the starting motor in the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. Built for correct alignment and stable mounting, it supports reliable engine starting by keeping the starter firmly positioned under vibration and load. |
$ 448.37
-
+
|
|
1-2 weeks delivery time The Bukh 000E5099 chain case sealing gasket is designed to close and protect the chain case on BUKH DV36 and DV48 marine diesel engines. Used in rear-end rotating weight and fuel lift pump assemblies as well as hand-start configurations, it helps maintain a tight joint to support clean, reliable operation and reduce the risk of leaks at the chain case interface. |
$ 16.09
-
+
|
|
1-2 weeks delivery time The Bukh 000E5100 hand-start sprocket is a chain wheel designed for the manual starting system on BUKH DV36 and DV48 marine diesel engines. Built for proper engagement in the hand-start mechanism, it helps deliver smooth, reliable transfer of motion during starting and supports dependable onboard service where manual start capability is required. |
$ 1,013.30
-
+
|
|
1-2 weeks delivery time The Bukh 000E5160 relief-valve closing screw is a dedicated fastening and sealing component used on the injection pump and oil cooler assemblies for BUKH DV36 and DV48 marine diesel engines. It secures the relief valve closing point to help maintain controlled oil flow and stable system operation under marine running conditions. |
$ 49.01
-
+
|
|
1-2 weeks delivery time The Bukh 000E5174 angle bracket is a mounting support for the multiple plug used on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Installed within the electrical system and, on certain variants, at the rear end rotating weight and fuel lift pump area, it secures the plug connection to reduce movement and help protect wiring from vibration-related strain. |
$ 61.90
-
+
|
|
1-2 weeks delivery time The Bukh 000E5234 cooling water pipe sealing gasket is designed for the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. It helps maintain a tight seal in the cooling-water circuit, supporting stable coolant flow and reducing the risk of leaks in this critical engine-side plumbing connection. |
$ 24.09
-
+
|
|
1-2 weeks delivery time The Bukh 000E5235 thermostat sealing ring is a rubber ring designed to seal the thermostat on BUKH DV36 marine diesel engines. It helps maintain a tight, leak-resistant joint in the cooling system so the thermostat can regulate coolant flow consistently and keep engine operating temperature stable. |
$ 53.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E5251 mounting bracket supports the engine control hardware on BUKH DV36 and DV48 marine diesel engines. Positioned in the rear-end rotating weight and fuel lift pump area, it secures the control arrangement to help maintain stable operation and reliable linkage support in the engine’s control assembly. |
$ 147.05
-
+
|
|
1-2 weeks delivery time The Bukh 000E5254 large gearbox washer is a precision spacer and load-spreading element used in the gear assembly to help maintain correct stack height and secure clamped joints. Installed in the gearbox hardware, it supports reliable fastening, protects mating surfaces, and contributes to stable alignment under marine drivetrain loads. |
$ 14.47
-
+
|
|
1-2 weeks delivery time The Bukh 000E5258 washer is a small gearbox washer designed to support correct spacing and secure assembly in the gearbox stack. Used in the marine transmission area, it helps maintain reliable alignment and consistent clamping, making it a practical OEM replacement part for service and repairs. |
$ 18.48
-
+
|
|
1-2 weeks delivery time The Bukh 000E5282 circulation pump housing is a pump casing designed for the circulation pump on BUKH DV36 and DV48 marine diesel engines. It forms the main structural body of the pump assembly, supporting secure mounting and stable coolant flow through the engine’s cooling circuit for dependable temperature control underway. |
$ 1,173.98
-
+
|
|
1-2 weeks delivery time The Bukh 000E5283 circulation pump shaft is a precision drive component for the circulation pump on BUKH DV36 and DV48 marine diesel engines. Installed within the pump assembly, it supports smooth rotation of the internal pump elements to keep coolant moving through the engine, helping maintain stable operating temperature during continuous marine operation. |
$ 506.24
-
+
|
|
1-2 weeks delivery time The Bukh 000E5284 spacer tube is a precision distance sleeve used in the circulation pump assembly on BUKH DV36 and DV48 marine diesel engines. It supports correct pump component spacing and alignment, helping the pump run smoothly and maintain consistent coolant flow through the engine’s cooling circuit. |
$ 108.49
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.