Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 023D3118K coupling is a dedicated drive connector for the fire pump arrangement on BUKH DV36 and DV48 marine diesel engines. It transmits torque securely between the engine-side drive and the pump, helping ensure dependable engagement and steady pump operation when reliability matters most. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 023D4105 SOLAS tools and spares set is a practical onboard kit intended for BUKH DV36 and 48RME marine diesel engines. Designed to support routine service needs and readiness at sea, it provides a dedicated tools-and-spares package matched to the DV-series engine application. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 023T1708 turbocharger R is a forced-induction unit for BUKH DV48 marine diesel engines, designed to use exhaust energy to compress intake air for stronger, cleaner combustion. Supplied as the turbocharger assembly, it supports reliable boost performance and is listed with reference number 008E8204 for DV48 applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 030D0203 complete oil dipstick assembly provides a dependable way to check and monitor engine oil level as part of the lubrication system. Designed as a complete replacement unit, it helps support correct servicing routines and protects your marine diesel engine by making accurate oil-level checks simple and repeatable. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 030D5007 disc set is a replacement clutch disc pack for the BW7 gearbox, designed to restore smooth, consistent power transfer through the marine transmission. Installed within the gearbox clutch assembly, these friction discs help ensure dependable engagement, stable drive under load, and reliable maneuvering in forward and reverse. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 030D9401 modification set is designed for the deep engine stand arrangement on BUKH BW6 and BW7 marine engines. This kit supports correct engine installation by adapting the engine stand configuration to the deep version, helping maintain proper positioning and a secure, service-ready setup in the engine mounting arrangement. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 22221-27900 valve spring is a precision engine valve-train component designed for Bukh marine diesel engine valve assemblies. It supports consistent valve operation by maintaining controlled spring force on the valve mechanism, helping promote stable timing and dependable performance in continuous marine duty. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh waterjet ECU is designed for D170J marine engine and waterjet control applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 530P9921 glow plug is a starting-system component designed to support reliable cold starting by preheating the combustion chamber in BUKH marine diesel applications. It helps the engine reach stable ignition conditions faster, reducing cranking time and improving start-up performance when temperatures are low. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 542A0609-A V-belt is a 10 x 1100 LA drive belt used to transmit power reliably between belt-driven accessories on Bukh marine engine installations. It replaces part number 542A0609 and is specified as not suitable for Bukh RME lifeboat engines; the matching alternative referenced is 542A0611. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 552A0302 red indicator light is a panel-mounted warning light used in Bukh electrical systems to provide clear visual status indication. Its bright red lens helps operators quickly identify alerts at the helm or engine instrumentation, supporting safer, more confident operation onboard. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 610A0800 fuel injection pump is a precision metering unit for BUKH DV10ME marine diesel engines, delivering controlled high-pressure fuel supply to support clean combustion and dependable throttle response. Built as an OEM-grade replacement, it belongs in the engine’s fuel injection system where accurate fueling is critical for smooth running and reliable performance underway. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 610A2401 pump element is a precision replacement component for the Bryce fuel injection pump used on BUKH DV10 and DV20ME marine diesel engines. It supports accurate metering and delivery of fuel within the injection system, helping maintain clean combustion, stable running, and dependable engine response under marine operating conditions. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 610G0030 seawater pump is a single-circuit cooling pump for BUKH DV20 and DV24 marine diesel engines. It delivers a steady flow of seawater through the engine’s cooling system to control operating temperature and support dependable running in harsh marine conditions, with a cross-reference to Johnson 10-35157-3. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 610G0130 complete pump unit is a ready-to-install replacement component for Bukh marine engine systems where a complete pump assembly is required. Supplied as a complete pump, it supports dependable fluid movement through its designated circuit, helping maintain stable operation and service reliability onboard. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 612A1011 starter pinion is a precision drive gear for the engine starting system, designed to engage the flywheel ring gear and transfer torque from the starter motor during cranking. Replacing a worn pinion helps restore clean, dependable starter engagement and reduces the risk of slip or grinding in marine engine operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 612A1023 starter magnetic switch is a control component for the starter system, designed to engage the starter circuit reliably when starting the engine. Built for marine-duty use, it helps deliver consistent starter operation and dependable electrical switching in Bukh installations. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Bukh 612H0520 alternator unit is a 12V/700W marine charging alternator supplied without a charging diode for BUKH DV 10, DV 20, DV 24, DV 29, DV 32, DV 36, and DV 48 engines. Used across electric-start and flywheel/front-end rotating-weight assemblies, it supports reliable battery charging and stable onboard electrical power in demanding marine operation, replacing earlier alternator references 008E7139 and 008E8253. |
Our managers will contact you and clarify the terms of the order
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.