Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E4914 decompression handle provides dependable manual decompression control for BUKH DV24RME, DV29RME, and DV32 engines in the cylinder head and valve assembly, and also serves as a handle for DV36 and DV48 hand-start arrangements. Built for OEM-style fit and function, it supports easier engine handling during starting and service operations where controlled valve actuation is required. |
$ 61.09
-
+
|
|
1-2 weeks delivery time The Bukh 000E4922 thrust bearing is an axial-load bearing element used at the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It supports controlled axial movement during operation, helping the rotating components run smoothly and reducing wear in this critical rear-end drive area. |
$ 695.59
-
+
|
|
1-2 weeks delivery time The Bukh 000E4931 V-belt pulley is a drive pulley used on the flywheel and front-end rotating assembly of BUKH DV36 and DV48 marine diesel engines. It provides the belt contact surface needed to transmit rotational power to belt-driven accessories, supporting stable operation and correct belt routing in the engine’s front-end drive system. |
$ 1,071.03
-
+
|
|
1-2 weeks delivery time The Bukh 000E4933 circulation pump rotor is a core rotating element for the cooling-water circulation pump used on BUKH DV36 and DV48 marine diesel engines. Installed inside the pump, it helps drive steady coolant flow through the engine’s cooling circuit to support stable operating temperature and dependable day-to-day running. |
$ 282.06
-
+
|
|
1-2 weeks delivery time The Bukh 000E4934 circulation pump cover is a protective housing component for the circulation pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps enclose and safeguard the pump internals, supporting reliable coolant circulation through the engine cooling system for stable operating temperatures underway. |
$ 358.42
-
+
|
|
1-2 weeks delivery time The Bukh 000E4935 cooling-water connecting pipe is a rigid coolant line used in the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. It routes cooling water through this section of the engine, supporting stable oil temperature control and dependable operation of the surrounding components. |
$ 347.04
-
+
|
|
1-2 weeks delivery time The Bukh 000E4941 spacer is an intermediate piece used in the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps maintain correct spacing and alignment of adjoining components, supporting stable operation and dependable fuel supply performance in the lift pump system. |
$ 615.54
-
+
|
|
1-2 weeks delivery time The Bukh 000E4942 blind cover is a sealing cover for the impeller pump connection point used on BUKH DV36 and DV48 engines. Installed at the rear-end rotating weight and fuel lift pump assembly area, it closes off the connection to help maintain a clean, secure layout and dependable operation in the engine compartment. |
$ 131
-
+
|
|
1-2 weeks delivery time The Bukh 000E4947 injection pump drive gear is designed for the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. This gear helps maintain accurate fuel pump drive timing, supporting consistent fuel delivery and dependable engine operation under marine loads. |
$ 1,795.92
-
+
|
|
1-2 weeks delivery time The Bukh 000E4977 intermediate ring is a precision spacer component used within the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. It supports correct alignment and secure fitment of mating parts, helping maintain a stable, leak-resistant interface and reliable operation in the engine’s fuel and cooling-related mounting stack. |
$ 317.41
-
+
|
|
1-2 weeks delivery time The Bukh 000E4978 injection pump retaining nut is designed for the injection pump and oil cooler assembly on BUKH DV36 and BUKH DV48 marine diesel engines. It helps secure the injection pump hardware for a stable, vibration-resistant fit, supporting dependable fuel system operation in marine service. |
$ 156.72
-
+
|
|
1-2 weeks delivery time The Bukh 000E4985 camshaft is a precision valve-train drive component for BUKH DV36 and DV48 marine diesel engines, used within the crankshaft and reciprocating assembly group. It converts crankshaft rotation into accurately timed valve actuation, helping maintain smooth combustion, correct engine timing, and dependable running under marine duty cycles. |
$ 2,671
-
+
|
|
1-2 weeks delivery time The Bukh 000E4987 push rod guide cup is a precision-guiding component used to support and align the push rod in BUKH DV36 and DV48 marine diesel engines. Installed within the engine’s crankshaft and piston assembly group, it helps maintain correct push rod movement for consistent valve train operation and reduced wear under continuous marine duty. |
$ 188.86
-
+
|
|
1-2 weeks delivery time The Bukh 000E5014 valve spring retainer secures the valve spring arrangement to support stable valve operation across BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used within the cylinder head and valve gear (and in the fuel injection and valves group on later models), it helps keep the valvetrain properly located for consistent running under marine load. |
$ 36.15
-
+
|
|
1-2 weeks delivery time The Bukh 000E5025 intake manifold gasket is a sealing element used in the crankcase, cylinder head, and cover area on BUKH DV36 and DV48 marine diesel engines. It helps maintain a tight seal at the intake manifold joint to support stable air intake performance and reduce the risk of leaks during operation. |
$ 34.56
-
+
|
|
1-2 weeks delivery time The Bukh 000E5028 exhaust manifold gasket provides a tight, reliable seal between the exhaust manifold and mating surfaces on BUKH DV36 and DV48 marine diesel engines. Fitted within the crankcase, cylinder head and covers assembly group, it helps prevent exhaust leakage, supports correct gas flow, and protects adjacent engine components from heat and soot contamination. |
$ 51.61
-
+
|
|
1-2 weeks delivery time The Bukh 000E5035 relief valve piston is a precision internal component used in the injection pump and oil cooler systems on BUKH DV36 and DV48 marine diesel engines. It supports stable pressure control by moving within the relief valve mechanism, helping protect connected components from excessive pressure during operation. |
$ 302.93
-
+
|
|
1-2 weeks delivery time The Bukh 000E5036 pressure relief valve spring is a precision spring element used in the relief valve within the injection pump and oil cooler system on BUKH DV36 and DV48 marine diesel engines. It helps the valve regulate pressure correctly, supporting stable lubrication and fuel-system operation under varying engine loads. |
$ 30.56
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.