Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E4823 oil dipstick tube is a formed pipe that supports accurate oil level checking on BUKH DV36 and DV48 marine diesel engines. Installed in the injection pump and oil cooler area, it provides a secure routing point for the dipstick so routine inspections and servicing can be carried out cleanly and reliably. |
$ 77.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E4839 camshaft gearwheel is a precision drive gear used at the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It supports correct camshaft-to-drive synchronization, helping maintain stable fuel supply operation and dependable engine timing under marine duty. |
$ 1,749.34
-
+
|
|
1-2 weeks delivery time The Bukh 000E4844 push rod guide spacer is a precision spacing component used in the push rod guide arrangement on BUKH DV36 and DV48 marine diesel engines. Installed at the rear end rotating weight and fuel lift pump assembly, it helps maintain correct alignment and stable operation of the push rod system for dependable fuel lift pump actuation. |
$ 222.58
-
+
|
|
1-2 weeks delivery time The Bukh 000E4876 inlet valve seat ring is a precision-fit cylinder head component that restores correct inlet valve sealing in BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Installed in the valve seat area, it supports reliable compression, stable combustion, and consistent engine performance by providing a durable sealing surface for the inlet valve. |
$ 85.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E4877 exhaust valve seat ring is a precision valve-train component that restores proper sealing at the exhaust valve in the cylinder head. Used across BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines, it supports reliable compression control and efficient heat transfer from the exhaust valve during high-temperature operation. |
$ 85.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E4878 valve guide component supports accurate valve stem alignment in the cylinder head and valve gear on BUKH DV-series marine diesel engines, helping maintain smooth valve movement and consistent seating. Used across cylinder head and valve assemblies and specified in fuel injection and valve groups on DV36 and DV48, it is a dependable OEM-style replacement for DV24RME, DV29RME, DV32, DV36, and DV48 applications. |
$ 114.13
-
+
|
|
1-2 weeks delivery time The Bukh 000E4880 nozzle holder insert is a precision insert used with the nozzle holder installation across multiple BUKH DV-series marine diesel engines. Fitted in assemblies such as the cylinder head and valves on DV24RME, DV29RME, and DV32, and used within fuel injection and valves on DV36 and DV48, it supports correct injector seating and stable fuel delivery performance for reliable combustion. |
$ 169.51
-
+
|
|
1-2 weeks delivery time The Bukh 000E4887 inlet valve is a precision engine valve component used in the cylinder head and valve system on BUKH DV-series marine diesel engines. It controls the intake airflow into the combustion chamber, supporting proper sealing and efficient cylinder filling for dependable starting, clean running, and stable performance on DV24RME, DV29RME, DV32, DV36, and DV48 installations. |
$ 188.81
-
+
|
|
1-2 weeks delivery time The Bukh 000E4888 exhaust valve is a precision cylinder head component for BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Installed in the valve train, it controls exhaust gas flow out of the combustion chamber to support clean scavenging, stable compression, and dependable engine performance under continuous marine duty. |
$ 226.56
-
+
|
|
1-2 weeks delivery time The Bukh 000E4890 valve spring disc is a spring-washer style seating component that supports correct valve spring installation on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used within the cylinder head and valve gear (and listed within fuel injection and valve assemblies on some models), it helps keep the valve train securely seated and operating smoothly under continuous marine duty. |
$ 24.09
-
+
|
|
1-2 weeks delivery time The Bukh 000E4891 valve spring is a critical valve train component used in the cylinder head and valve gear on BUKH DV24RME, DV29RME, and DV32 engines, and in the fuel injection and valve assemblies on BUKH DV36 and DV48 engines. It provides the closing force needed for stable valve control, helping maintain consistent combustion, compression sealing, and dependable running under marine load. |
$ 69.09
-
+
|
|
1-2 weeks delivery time The Bukh 000E4899 spacer spring is a precision distance spring used in the fuel injection and valve assembly on BUKH DV36 and DV48 marine diesel engines. It helps maintain correct spacing and controlled spring force within the mechanism, supporting stable component positioning and consistent operation under marine engine vibration and load changes. |
$ 26.52
-
+
|
|
1-2 weeks delivery time The Bukh 000E4901 hand start shaft is a dedicated shaft component for the manual starting system used on BUKH DV36 and DV48 marine diesel engines. Built for dependable engagement and smooth transfer of input motion during starting, it supports reliable operation of the hand start assembly onboard. |
$ 1,914.14
-
+
|
|
1-2 weeks delivery time The Bukh 000E4902 hand-start spring is a replacement tension component for the manual starting system on BUKH DV36 and DV48 marine diesel engines. Installed in the hand-start assembly, it helps maintain the correct return force and engagement feel during cranking, supporting dependable manual starting operation onboard. |
$ 102.05
-
+
|
|
1-2 weeks delivery time The Bukh 000E4904 nozzle-holder clamp dog is a clamping piece used to secure the injector nozzle holder in place on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Installed in the cylinder head and valve gear or the fuel injection and valve assembly (depending on engine model), it helps maintain stable injector positioning for reliable fuel delivery and consistent combustion. |
$ 224.19
-
+
|
|
1-2 weeks delivery time The Bukh 000E4910 cylinder head cover is a valve cover designed for the crankcase and cylinder head cover area on BUKH DV36 and DV48 marine diesel engines. It closes and protects the valve train area, helping keep the top end of the engine sealed and safeguarded in harsh marine operating conditions. |
$ 1,143.94
-
+
|
|
1-2 weeks delivery time The Bukh 000E4911 valve cover sealing gasket is designed to seal the cover joint on BUKH DV36 and DV48 marine diesel engines within the crankcase, cylinder head and covers assembly. It helps maintain proper crankcase sealing by preventing oil mist and seepage at the cover interface, supporting a cleaner engine exterior and dependable operation. |
$ 114.89
-
+
|
|
1-2 weeks delivery time The Bukh 000E4912 valve cover retaining nut is a fastening component used on the cylinder head and cover assemblies of BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. It helps secure the valve cover in place to support consistent clamping and dependable sealing, contributing to clean, stable operation in the engine top-end area. |
$ 23.31
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.