Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E6367 rectangular turbocharger gasket is a sealing element for the turbo assembly on BUKH DV48 marine diesel engines. It helps maintain a tight, reliable joint at the turbocharger interface to support stable boost and exhaust flow while reducing the risk of leakage in demanding marine operation. |
$ 65.06
-
+
|
|
1-2 weeks delivery time The Bukh 000E6451 exhaust gasket is a sealing element used in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. It helps maintain a tight joint in the exhaust gas path, supporting proper turbocharger operation by preventing leaks that can reduce boost response and increase heat exposure in the engine room. |
$ 41.79
-
+
|
|
1-2 weeks delivery time The Bukh 000E6454 sealing element is a dependable replacement seal for BUKH DV10LME marine diesel engines, designed to create a tight joint between mating components. It helps protect the engine installation by supporting leak-free operation and maintaining proper sealing integrity in the affected engine assembly. |
$ 20.08
-
+
|
|
1-2 weeks delivery time The Bukh 000E6460 banjo ring hose connection supports secure, leak-resistant fuel line routing on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used across the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it helps maintain steady fuel delivery and dependable system sealing in vibration-prone marine installations. |
$ 188.81
-
+
|
|
1-2 weeks delivery time The Bukh 000E6639 sealing gasket is a paper gasket designed for the upper flange-to-motor joint. It helps maintain a tight, leak-resistant connection at the flange interface, supporting clean assembly and dependable operation after service or rebuild work. |
$ 34.56
-
+
|
|
1-2 weeks delivery time The Bukh 000E6736 cover is a protective closing component for the rear-end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps shield the assembly from dirt and moisture while supporting a secure, OEM-style fit for dependable operation in marine engine-room conditions. |
$ 85.18
-
+
|
|
1-2 weeks delivery time The Bukh 000E6747 banjo bolt is a fuel-system fastener used on BUKH DV24RME, DV29RME, and DV32 marine diesel engines across the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe connections. Designed to secure banjo-style fittings, it supports clean, reliable fuel routing and helps maintain tight, vibration-resistant joints in critical fuel supply and injection circuits. |
$ 65.06
-
+
|
|
1-2 weeks delivery time The Bukh 000E6817 fastening nut is designed for the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps secure fitted components against vibration and cyclic loads, supporting stable operation and dependable hardware retention in this critical engine area. |
$ 80.35
-
+
|
|
1-2 weeks delivery time The Bukh 000E6852 bearing bush is a precision-fit wear component for BUKH DV10LME marine diesel engines. Installed where controlled shaft support and alignment are required, it helps maintain smooth rotation, reduces metal-to-metal contact, and supports stable operation of the related engine assembly under marine duty. |
$ 47.12
-
+
|
|
1-2 weeks delivery time The Bukh 000E6921 hull cover is a protective cover designed for BUKH DV8LSME and DV10LSME marine engines. It helps shield the hull-side area around the engine installation from exposure and contamination, supporting a cleaner, more protected installation in onboard marine environments. |
$ 192.02
-
+
|
|
1-2 weeks delivery time The Bukh 000E6954 oil sump is a crankcase-mounted oil pan used on BUKH DV36 and DV48 marine diesel engines, supporting clean, secure oil containment beneath the engine. As part of the crankcase, cylinder head and covers assembly group, it helps maintain proper lubrication supply by providing a stable reservoir for returning oil during operation. |
$ 1,409.42
-
+
|
|
1-2 weeks delivery time The Bukh 000E7137 thermostat sealing gasket is a keel-cooling system seal designed to secure the thermostat joint on BUKH DV36 and DV48 marine diesel engines. It helps maintain proper coolant containment around the thermostat, supporting stable temperature control and dependable operation by preventing leaks at the thermostat sealing surfaces. |
$ 60.26
-
+
|
|
1-2 weeks delivery time The Bukh 000E7358 banjo bolt is a hollow return-line fastener used in BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel fuel systems. Designed for banjo-style connections at the nozzle and related fuel piping, it helps secure a clean, leak-resistant flow path across assemblies such as the fuel filter, fuel injection pump, fuel lift pump, and fuel pipes, and is also used on DV48 lubrication pump piping where specified. |
$ 26.57
-
+
|
|
1-2 weeks delivery time The Bukh 000E7425 sealing gasket for the feed pump supports leak-free operation on BUKH DV29RME and DV32 engines, within the camshaft, lubricating oil pump, and lubricating oil filter assembly area. Designed to seat correctly against the feed pump (000E3436), it helps maintain proper oil system integrity and dependable engine performance in marine service. |
$ 20.08
-
+
|
|
1-2 weeks delivery time The Bukh 000E7531 splined flexible coupling half is a drivetrain coupling component used in the flexible coupling connection on BUKH DV-series marine diesel engines. Installed for reversing gear mounting (M 60) on DV24RME, DV29RME, and DV32, and at the rear end for the rotating weight and fuel lift pump on DV36 and DV48, it provides a secure splined torque transfer interface while helping support smooth, dependable power transmission. |
$ 513.42
-
+
|
|
1-2 weeks delivery time The Bukh 000E7580 spacer is a precision distance piece used in the flywheel and front end rotating weight assembly on BUKH DV36 and DV48 marine engines. It helps maintain correct component spacing and alignment within the rotating assembly, supporting smooth operation and dependable power transmission. |
$ 29.73
-
+
|
|
1-2 weeks delivery time The Bukh 000E7581 lifting fitting is a dedicated handling component used on the fuel injection and valve assembly area of BUKH DV36 and DV48 marine diesel engines. It provides a secure attachment point for safe lifting and positioning during service work, supporting controlled engine handling in the workshop or onboard maintenance. |
$ 88.58
-
+
|
|
1-2 weeks delivery time The Bukh 000E7659 gasket is a precision sealing component for BUKH DV10LME marine diesel engines, designed to restore a secure seal where the gasketed joint is used on the engine. It helps prevent leaks, maintains proper system integrity, and supports dependable operation after service or overhaul. |
$ 43.39
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.