Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E3697 spacer plate is a precision spacing component used to set correct alignment and stand-off between mating parts in a Bukh marine engine assembly. By maintaining the intended gap and positioning, it supports proper fit-up during installation and helps keep connected components running true under vibration and load. |
$ 9.62
-
+
|
|
1-2 weeks delivery time The Bukh 000E3778 keel cooler nut is a securing fastener used in the keel cooling system, tightening the keel tube connection to help keep the cooler assembly firmly sealed and stable under marine operating conditions. It is specified for BUKH DV24RME, DV29RME, DV32, DV36, and DV48 engines using keel cooling. |
$ 123.72
-
+
|
|
1-2 weeks delivery time The Bukh 000E3959 threaded plug component also serves as a locking screw across multiple BUKH engine assemblies, supporting secure sealing and retention where service access points and locking locations are required. Used as a steel bottom plug in the cylinder head and valves assembly on DV24RME, DV29RME, and DV32 engines, and as a locking screw on DV36 and DV48 crankcase, cylinder head, and cover assemblies, it helps maintain reliable engine integrity in marine operation. |
$ 29.73
-
+
|
|
1-2 weeks delivery time The Bukh 000E4301 inlet valve seat is a precision engine component that supports correct inlet valve sealing in the cylinder head. Installed as part of the valve train, it provides a durable seating surface that helps maintain proper compression and efficient combustion performance in BUKH marine diesel engines. |
$ 61.90
-
+
|
|
1-2 weeks delivery time The Bukh 000E4302 exhaust valve seat is a precision valve-train component for the cylinder head exhaust-valve area. It provides a stable seating surface for the exhaust valve to close correctly, supporting strong sealing, efficient heat transfer from the valve to the cylinder head, and dependable operation under continuous marine engine loads. |
$ 61.90
-
+
|
|
1-2 weeks delivery time The Bukh 000E4303 adjusting shim plate (0.15 mm) is a precision spacer used in the fuel system on BUKH DV24RME and DV29RME marine diesel engines. Installed within fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it supports accurate component positioning to help maintain stable fuel delivery and dependable engine operation. |
$ 17.11
-
+
|
|
1-2 weeks delivery time The Bukh 000E4554 instrument panel blank disk is a clean, OEM-style cover piece for unused openings in the instrument panel on BUKH DV24RME, DV29RME, DV32, DV36, DV48, and EPA28 marine engines. It helps keep the panel layout tidy and protected while supporting a professional, service-ready helm installation. |
$ 224.16
-
+
|
|
1-2 weeks delivery time The Bukh 000E4557 washer is a precision fit spacing and load-distribution fastener used across multiple BUKH engine assemblies, including cylinder head and valve gear, crankshaft and connecting-rod groups, flywheel areas, fuel injection and valve components, and hand-start equipment. Designed for BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines, it helps secure bolted joints, supports consistent clamping force, and protects mating surfaces during service. |
$ 17.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E4726 elbow gasket is a sealing element for the circulation pump elbow connection on BUKH DV36 and DV48 marine diesel engines. It helps prevent coolant leaks at the elbow joint, supporting stable cooling-system pressure and reliable engine temperature control in marine operation. |
$ 13.66
-
+
|
|
1-2 weeks delivery time The Bukh 000E4760 front gear is a drivetrain timing component used within the crankshaft and rotating assembly on BUKH DV36 and DV48 marine diesel engines. Designed for OEM-style fit and dependable power transmission, it supports correct geartrain operation to keep the crankshaft-driven systems running smoothly under marine duty. |
$ 965.87
-
+
|
|
1-2 weeks delivery time The Bukh 000E4762 rear gearwheel is a drivetrain timing component used within the crankshaft and rotating assembly of BUKH DV36 and DV48 marine diesel engines. It helps transmit rotary motion through the engine’s gear train for stable, synchronized operation, making it a dependable choice when restoring correct mechanical drive alignment during overhaul or repair. |
$ 1,313.83
-
+
|
|
1-2 weeks delivery time The Bukh 000E4765 standard main bearing liner set is a two-shell bearing package for BUKH DV36 and DV48 engines, supplied as one smooth bearing shell and one bearing shell with an oil groove and bore. Installed in the crankshaft bearing arrangement, it supports the crankshaft journals and helps maintain stable, low-friction rotation with dependable oil distribution. |
$ 277.23
-
+
|
|
1-2 weeks delivery time The Bukh 000E4766 thrust washer supports controlled crankshaft end float in the crankshaft and bearing assembly on BUKH DV36 and DV48 marine diesel engines. Positioned to stabilize axial movement under propeller load and varying RPM, it helps protect bearing surfaces and maintains smooth, reliable crankshaft alignment. |
$ 203.30
-
+
|
|
1-2 weeks delivery time The Bukh 000E4778 intermediate wheel gear is a drive-train component used in the rear-end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. Designed to mesh accurately with surrounding gears, it helps transmit rotation smoothly and supports reliable pump and timing-related operation in the rear-end gear area. |
$ 2,229.37
-
+
|
|
1-2 weeks delivery time The Bukh 000E4783 oil sump gasket is a sealing element for the crankcase and cover area on BUKH DV36 and DV48 marine diesel engines. It helps maintain a tight seal at the oil pan joint to support clean, reliable engine operation and reduce the risk of oil seepage in service. |
$ 140.59
-
+
|
|
1-2 weeks delivery time The Bukh 000E4784 lift pump gasket is a sealing element for the feed pump and fuel lift pump mounting interface on BUKH DV-series marine diesel engines. Installed within the fuel system assemblies, it helps maintain a tight, leak-resistant joint to support reliable fuel supply to the injection system across DV24RME, DV29RME, DV32, DV36, and DV48 applications. |
$ 7.25
-
+
|
|
1-2 weeks delivery time The Bukh 000E4786 cover is a protective closure used in the crankshaft, bearings, connecting rod, piston, and cylinder liner area on BUKH DV36 and DV48 marine diesel engines. Designed for a secure OEM-style fit, it helps shield internal engine components and supports clean, reliable operation in marine service. |
$ 203.30
-
+
|
|
1-2 weeks delivery time The Bukh 000E4787 camshaft bearing is a precision engine bearing used in the crankshaft and bearing group on BUKH DV36 and DV48 marine diesel engines. It supports smooth camshaft rotation and helps maintain stable valve timing by reducing friction and wear, making it a smart choice for dependable engine rebuilds and service work. |
$ 282.57
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.