Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E2365 starter mounting bracket supports secure installation of the starter motor on BUKH DV24RME, DV29RME, and DV32 marine diesel engines with electric start. Designed to hold the starter in correct alignment, it helps ensure consistent engagement and dependable cranking performance in the electric starting assembly. |
$ 573.71
-
+
|
|
1-2 weeks delivery time The Bukh 000E2368 adjusting lever clamp is a positioning and securing component used in the electric start assembly on BUKH DV24RME, DV29RME, and DV32 engines, and in the electric start and alternator assembly on BUKH EPA28 and EPA48 engines. It supports controlled adjustment and stable retention of the related mounted parts for reliable operation in marine service. |
$ 77.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E2418 sprocket cover is a protective cover for the chain box on BUKH DV24RME, DV29RME, and DV32 hand-start marine diesel engines. It helps shield the sprocket and chain drive area from debris and accidental contact while supporting a clean, secure engine installation. |
$ 129.16
-
+
|
|
1-2 weeks delivery time The Bukh 000E2462 pump gasket is a sealing element for the keel cooling pump installation on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain a tight, leak-resistant joint at the pump interface, supporting stable coolant circulation and dependable temperature control in the keel cooling system. |
$ 8.04
-
+
|
|
1-2 weeks delivery time The Bukh 000E2487 adjustment shim plate (0.1 mm) is used within the fuel system assemblies of BUKH DV24RME and DV29RME marine diesel engines, including the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe arrangement. It supports precise setup and alignment of fuel-system components to help maintain dependable fuel delivery and consistent engine operation. |
$ 13.98
-
+
|
|
1-2 weeks delivery time The Bukh 000E2488 adjusting plate is a 0.2 mm shim used in the fuel system assemblies on BUKH DV24RME and DV29RME marine diesel engines. Installed within fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it supports correct component spacing and alignment for dependable fuel system operation. |
$ 18.66
-
+
|
|
1-2 weeks delivery time The Bukh 000E2584 thermostat rubber ring provides a tight seal at the thermostat housing in the keel cooling system for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. This sealing ring helps prevent coolant leaks and supports stable temperature control by ensuring the thermostat assembly seats correctly during operation. |
$ 50.32
-
+
|
|
1-2 weeks delivery time The Bukh 000E2923 stop pin is a precision locating component used in the stop solenoid assembly on BUKH DV20 to DV32 marine diesel engines, including DV24RME, DV29RME, and DV32. It helps maintain correct alignment and secure operation of the solenoid stop mechanism for dependable engine shut-down control. |
$ 76.33
-
+
|
|
1-2 weeks delivery time The Bukh 000E3051 governor spring is a precision regulating component used in the engine speed control system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Fitted within the governor and regulating handle arrangement (and, on DV24RME, also referenced in the camshaft and lubrication system assembly group), it helps maintain stable, responsive engine rpm control under changing load conditions. |
$ 23.31
-
+
|
|
1-2 weeks delivery time The Bukh 000E3053 control spring is a precision spring element used in the engine control mechanism to support stable, predictable control response. Ideal for service replacement on BUKH marine diesel installations, it helps maintain consistent operation by providing the correct spring force within the control and regulating system. |
$ 28.13
-
+
|
|
1-2 weeks delivery time The Bukh 000E3124 shaft is a precision drive component used in the camshaft and lubricating oil system on BUKH DV29RME and DV32 marine diesel engines. Installed within the camshaft, lubricating oil pump, and lubricating oil filter assembly, it helps transmit motion where dependable oil circulation and consistent engine lubrication are essential. |
$ 152.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E3223 front shaft for rotating weights supports smooth, controlled rotation of the balance-weight system in the end cover, rear and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Built for secure, accurate fit in the rotating-weight arrangement, it helps maintain stable engine operation by keeping key rotating components properly supported and aligned. |
$ 291.70
-
+
|
|
1-2 weeks delivery time The Bukh 000E3224 rear rotating-weights shaft is a precision engine component used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports stable rotation and correct alignment of the rotating weight mechanism, helping maintain smooth, reliable operation in demanding marine service. |
$ 328.15
-
+
|
|
1-2 weeks delivery time The Bukh 000E3225 nylon thrust collar ring is a durable thrust-wear component used in rotating weight and shaft-related assemblies on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Positioned in locations such as the rear end cover, flywheel/front end rotating weight area, and rear rotating weight and fuel lift pump assembly, it helps control axial movement and provides a low-friction bearing surface for smooth, stable operation. |
$ 13.66
-
+
|
|
1-2 weeks delivery time The Bukh 000E3226 intermediate disc and washer component supports accurate spacing and secure stack-up in rotating weight and end-cover assemblies across BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used in locations including the rear end cover rotating weights, flywheel and front-end rotating weight group, and the rear rotating weight area near the fuel lift pump, it helps maintain correct alignment for smooth, reliable operation. |
$ 32.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E3397 piston element is built for the camshaft and lubricating-oil system group on BUKH DV29RME and DV32 marine diesel engines. Used within the camshaft, lubricating oil pump, and lubricating oil filter assembly, it supports dependable oil circulation and stable lubrication performance for smooth, protected engine operation. |
$ 55.42
-
+
|
|
1-2 weeks delivery time The Bukh 000E3555 seal is a dedicated sealing element for two-circuit water pump systems, helping maintain a tight, reliable interface within the pump assembly. Designed for marine-duty service, it supports stable coolant circulation by reducing the risk of leaks that can compromise cooling performance. |
$ 22.49
-
+
|
|
1-2 weeks delivery time The Bukh thermostat housing is intended for DV20 marine engine two-circuit cooling system applications. |
$ 180.38
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.