Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E0789 spacer ring is a distance ring used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain correct spacing and alignment of rotating components, supporting smooth operation and consistent fit during service or rebuild work. |
$ 47.40
-
+
|
|
1-2 weeks delivery time The Bukh 000E0792 thrust washer is a precision-fit wear component used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps control axial movement and protects adjoining parts by providing a stable bearing surface where rotating components run under load. |
$ 38.57
-
+
|
|
1-2 weeks delivery time The Bukh 000E0890 half chain case is a chain box housing section used on the raised hand starting arrangement for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It encloses and protects the chain drive area, helping keep components aligned and shielded in harsh marine engine-room conditions while supporting a clean, serviceable installation. |
$ 445.33
-
+
|
|
1-2 weeks delivery time The Bukh 000E0894 spring guide plate is a spring locating component used in the raised hand starting assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps keep the starter spring correctly guided and seated for smooth, predictable engagement during manual starting and reliable operation of the starting mechanism. |
$ 42.57
-
+
|
|
1-2 weeks delivery time The Bukh 000E0974 front cover is a crankcase and front end cover component for BUKH DV-series marine diesel engines including DV20, DV24RME, DV29RME, and DV32. Designed to close and protect the front end of the engine assembly, it supports a secure, correctly enclosed crankcase area for dependable operation in marine service. |
$ 785.28
-
+
|
|
1-2 weeks delivery time The Bukh 000E0975 sealing gasket is designed for the crankcase and front end cover joint on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain a secure seal at the engine front end, supporting clean assembly and dependable operation by reducing the risk of leakage at this critical interface. |
$ 73.10
-
+
|
|
1-2 weeks delivery time The Bukh 000E1089 fastening nut is a secure, OEM-style hardware piece used within the fuel injection and valve assemblies on BUKH DV36 and DV48 marine diesel engines. It helps hold critical components in position, supporting stable operation, consistent adjustment, and dependable service in the engine’s fuel and valve train areas. |
$ 4.18
-
+
|
|
1-2 weeks delivery time The Bukh 000E1095 bearing bush is a precision bushing used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports controlled rotation and alignment of moving components, helping reduce wear and maintain smooth, reliable operation in demanding onboard service. |
$ 31.60
-
+
|
|
1-2 weeks delivery time The Bukh 000E1184 pressure pipe clamp bracket secures the fuel system pressure pipe on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used across the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it supports stable routing and helps keep fuel lines properly retained under vibration and engine movement. |
$ 17.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E1185 counter plate is a clamp support component used across the fuel system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed with a clamp in the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it helps secure lines and components firmly to reduce movement and support tidy, reliable fuel-system routing. |
$ 17.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E1206 rubber damper supports key fuel-system components on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe mounting locations, it helps cushion vibration and reduce transmitted noise to protect connections and maintain a secure, stable installation in marine service. |
$ 12.08
-
+
|
|
1-2 weeks delivery time The Bukh 000E1207 adjustment screw is a precision setting fastener used to fine-tune key control and timing-related components on BUKH marine diesel engines. Fitted in governor and regulating handle assemblies on DV24RME, DV29RME, and DV32 engines—and also used on DV24RME camshaft, lubricating oil pump, and lubricating oil filter assemblies—it helps maintain stable adjustment, smooth control response, and dependable engine operation. |
$ 24.40
-
+
|
|
1-2 weeks delivery time The Bukh 000E1385 shaft is a precision drive and linkage component used across multiple BUKH DV-series marine diesel assemblies, supporting correct mechanical actuation and timing where fitted. It is used on DV24RME engines in the governor and regulating handle system as well as within the camshaft, lubricating oil pump, and lubricating oil filter assembly, and it also fits DV29RME and DV32 engines in the governor and regulating handle mechanism for smooth, dependable control response. |
$ 40.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E1540 valve cover sealing gasket is designed for the valve cover area on BUKH DV20 marine diesel engines, helping maintain a tight seal to reduce oil seepage and keep the top end of the engine clean and protected. It’s a practical OEM-fit replacement for service work where a secure valve cover seal is essential. |
$ 97.22
-
+
|
|
1-2 weeks delivery time The Bukh 000E1561 cylinder liner is a precision engine component used in the crankshaft, bearings, connecting rod, piston, and cylinder liner assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It provides a durable running surface for the piston, supporting proper compression control and stable engine performance in demanding marine operation. |
$ 648.34
-
+
|
|
1-2 weeks delivery time The Bukh 000E1758 rear gearwheel is a drivetrain timing and power-transfer component used within the crankshaft and rotating-assembly group on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed for correct meshing and dependable operation, it supports smooth torque transmission and stable engine running in demanding marine service. |
$ 642.82
-
+
|
|
1-2 weeks delivery time The Bukh 000E1770 governor weight is a precision speed-governing component used in the governor system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the governor and regulating handle assembly (and also referenced within the DV24RME camshaft and lubrication group), it supports stable engine speed control by helping the governor respond smoothly to load changes. |
$ 63.23
-
+
|
|
1-2 weeks delivery time The Bukh 000E2118 center main bearing set in 0.6 mm undersize supports accurate crankshaft alignment and smooth rotation in the crankshaft and bearing assembly of BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to restore correct running clearance on an undersize crankshaft journal, it helps reduce wear, maintain stable oil film control, and protect the rotating assembly under continuous marine load. |
$ 503.04
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.