Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 008E8414 fuel line is a dedicated fuel-system hose/pipe used to route fuel safely and cleanly within a Bukh marine engine installation. Designed as an OEM-style replacement, it supports consistent fuel delivery to help maintain stable engine operation underway. |
$ 249.13
-
+
|
|
1-2 weeks delivery time The Bukh blind cover is designed for DV24 marine diesel hand-start system service applications. |
$ 350.03
-
+
|
|
1-2 weeks delivery time The Bukh 008E8514 expansion tank assembly supports stable coolant volume and pressure control in the keel-cooling system for BUKH DV24RME, DV29RME, and DV32 marine engines. Supplied as a complete expansion vessel, it helps manage coolant thermal expansion to keep the closed-loop cooling circuit operating reliably, and it replaces part number 008E7801. |
$ 806.86
-
+
|
|
1-2 weeks delivery time The Bukh 008E8530 75-degree thermostat is a temperature-control element for BUKH DV-series marine engines using 2-circuit cooling, supporting stable warm-up and regulated coolant flow through the cooling system. Commonly used in keel-cooling arrangements on DV24RME, DV29RME, and DV32 engines, it helps maintain consistent operating temperature and replaces earlier item number 008E6588. |
$ 212.49
-
+
|
|
1-2 weeks delivery time The Bukh 008E8558 leak oil pipe is a dedicated leak oil connection used on BUKH DV36 engines within the fuel injection system, supporting controlled routing of leak oil away from components. Fitted in assemblies covering the injection pump area as well as the fuel injection and valve group, it helps keep the system running cleanly by guiding leak oil back into the proper return path. |
$ 968.40
-
+
|
|
1-2 weeks delivery time The Bukh 008E8559 leak oil return line is a steel fuel-system connection used to route leak-off fuel back through the return circuit on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed across the fuel filter and fuel supply components around the fuel injection pump, fuel lift pump, and fuel piping, it helps keep the system tidy and functioning correctly by providing a secure return path. |
$ 271.54
-
+
|
|
1-2 weeks delivery time The Bukh 008E8587 leak oil connection is a dedicated fitting used on BUKH DV48 marine diesel engines to route leak-off oil within key engine systems. Installed across the fuel injection area and lubrication-related pipework, it supports clean, controlled return flow and helps keep the injection pump, valve gear, and connected circuits operating reliably. |
$ 968.40
-
+
|
|
1-2 weeks delivery time The Bukh 008E8701 hose nipple with throttle is a flow-controlling connection fitting for the keel cooling system on BUKH DV36 and DV48 marine diesel engines. It provides a secure hose interface while helping regulate coolant circulation through the keel cooling circuit for stable operating temperatures in marine duty. |
$ 157.80
-
+
|
|
1-2 weeks delivery time The Bukh 008E8708 intermediate pipe is a ducting component for the air inlet and turbocharger system on BUKH DV48 marine diesel engines. Designed to route intake airflow between connected assemblies, it supports a secure, properly aligned air path that helps the turbocharged intake system operate consistently in marine service. |
$ 221.78
-
+
|
|
1-2 weeks delivery time The Bukh 008E8766 engine wiring harness with connector provides a dependable electrical connection solution for the electric mains system on BUKH DV20, DV24, DV29, and DV32 marine diesel engines, including DV24RME and DV29RME variants. Designed as a complete harness for the main electrical circuit, it supports clean routing and secure plug-in connectivity to help keep starting, charging, and engine electrical functions operating reliably. |
$ 344.64
-
+
|
|
1-2 weeks delivery time The Bukh 008E8859 cover unit with a bleeder valve is designed to support clean venting of trapped air in key engine assemblies on BUKH DV36 and DV48 marine diesel engines. Used on the rear-end rotating weight and fuel lift pump area and, on DV48 engines, also in the air inlet and turbocharger assembly, this cover helps maintain stable operation by enabling controlled air bleeding during service and commissioning. |
$ 749.49
-
+
|
|
1-2 weeks delivery time The Bukh 008E8926 alternator wire is a dedicated electrical lead for connecting and supporting alternator operation within the engine electrical system on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Built as an OEM-fit replacement, it helps maintain dependable charging performance and stable onboard power supply by ensuring a secure, correct alternator connection in the electric mains assembly. |
$ 13.88
-
+
|
|
1-2 weeks delivery time The Bukh 008E9054 black 1.5 mm² electrical cable is built for instrument panel wiring on BUKH marine diesel engines, providing a dependable conductor for panel circuits and connections. Designed for DV and EPA series instrument panels including DV24RME, DV29RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 installations, it supports clean, service-ready electrical routing on board. |
$ 9.96
-
+
|
|
1-2 weeks delivery time The Bukh 008E9148 exhaust flange with lock nut is a secure mounting component for the marine exhaust connection, helping keep the exhaust joint tight and stable under vibration and heat cycling. Superseding part number 008E2484, it is suited to BUKH exhaust system service where a reliable flange-and-locking fastener arrangement is required. |
$ 224.16
-
+
|
|
1-2 weeks delivery time The Bukh 008E9158 turbocharger lubrication pipe provides a reliable oil supply line within the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. Designed as an OEM-fit replacement, it supports correct turbocharger lubrication to help maintain smooth operation and protect critical rotating components under continuous marine load. |
$ 555.43
-
+
|
|
1-2 weeks delivery time The Bukh 008E9225 complete rocker arm set is a four-piece valve-train kit for BUKH DV24-32 marine diesel engines, supplied with left and right rocker arms plus the supporting hardware for installation and adjustment. Designed to help restore accurate valve actuation, it supports stable engine operation by maintaining correct motion transfer from the valve gear to the valves. |
$ 993.29
-
+
|
|
1-2 weeks delivery time The Bukh 008E9226 rocker arm shaft assembly is a complete valve-train shaft unit for BUKH DV36 and DV48 marine diesel engines. It supports correct rocker arm alignment and stable valve actuation, helping maintain consistent valve timing and smooth engine operation; it is not suitable for DV24 engines. |
$ 1,489.91
-
+
|
|
1-2 weeks delivery time The Bukh 008E9276 exhaust bend is a dedicated exhaust routing component for BUKH DV32 marine diesel engines, positioned within the air inlet and turbocharger assembly area. It helps direct exhaust flow through the correct path in the turbocharger-related exhaust section, supporting clean installation alignment and dependable operation in a marine engine room environment. |
$ 1,526.38
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.